Mission Magnum Pump 640202222IT50,4X3X13 Mechanical Seal

2025-12-23 18:18

1. Product Introduction

The 4x3x13 centrifugal pump is a heavy-duty slurry pump from the Mission Magnum I and Sandmaster series, engineered primarily for handling abrasive fluids in demanding industrial and oilfield applications.

  • Primary Application: Designed mainly for the solids control circulating system on oilfield drilling rigs, transferring drilling mud, sand-laden fluids, etc. Also used in fracturing (frac), dredging, mineral processing, and general industrial transfer.

  • Key Features:

    • Robust Construction: Features thicker casings for extended life, larger bearings, and a heavier shaft to reduce deflection.

    • Easy Maintenance: Incorporates an open impeller design to reduce shaft loads, along with a replaceable shaft sleeve and stuffing box cover.

    • Configuration Flexibility: Can be unitized with electric motors, diesel engines, or hydraulic motors. Available in horizontal, vertical, or close-coupled configurations.

    • Material Options: Fluid end components (casing, impeller) are available in various materials including Magnachrome/High-Chrome Alloy, Hard Iron, Stainless Steel, and Aluminum Bronze to suit different fluids.

2. Technical Parameter Table

Specifications vary slightly across sources. The table below summarizes the key technical data.

ParameterMagnum I 4x3x13 (Typical)Sandmaster 4x3x13Other Source Reference
ModelMagnum I 4x3x134x3x13 Mission SandmasterSM 4x3x13
Ports (Inch)4" Inlet / 3" Outlet4" Inlet / 3" Outlet4" Inlet / 3" Outlet
Flow Rate60-80 m³/h60-80 m³/hMax 875 GPM (~198 m³/h)
Head22-28 m22-28 mMax 530 ft (~161.5 m)
Impeller Dia.13 inch--
Motor Power11/15 kW11/15 kWUp to 55 kW
Speed1450/1750 rpm1450/1750 rpm1200–3600 rpm
Efficiency~65%65%-
Weight (Bare Pump)205 kg221 kg~445 lb (~202 kg)


Name:
Message:
Verification code:
Submit
Comment