Product Title: Mission Magnum Centrifugal Pump | Model 8×6×14 | Part Number 640200929
Product Overview:
The Mission Magnum 8×6×14 (Part No. 640200929) is a high-power, heavy-duty centrifugal pump engineered for extreme-duty slurry and fluid transfer applications. Designed to handle motors up to 200 HP, this robust pump delivers exceptional flow rates up to 2,600 GPM and heads up to 550 feet, making it a cornerstone solution for the most demanding industrial, drilling, and dredging operations where maximum performance and durability are non-negotiable.
Core Technical Specifications:
| Parameter | Specification |
|---|---|
| Model | Magnum 8x6x14 |
| Part Number | 640200929 |
| Port Sizes | 8" Suction / 6" Discharge |
| Impeller Type & Diameter | Open Design, Wide-Tipped Vanes, Up to 14" |
| Max Flow Capacity | Up to ~2,600 GPM |
| Max Total Dynamic Head | Up to 550 ft |
| Max Power Rating | Up to 200 HP |
| Key Construction | Thick Concentric Casing, Heavy-Duty Shaft, Replaceable Wear Parts |
Key Features & Design Advantages:
Engineered for Extreme Duty: Built to support high-power applications up to 200 HP, delivering unmatched flow and pressure for large-scale industrial and resource extraction processes.
Maximum Wear Resistance & Serviceability: Features a thick, concentric casing with replaceable wear pads, allowing for easy maintenance and restoration of the fluid end, drastically reducing lifetime operating costs in severely abrasive conditions.
Unmatched Shaft Strength & Reliability: Incorporates a heavy-duty, large-diameter shaft (2.5" under packing) with replaceable stainless steel sleeves. This design minimizes deflection, protects against wear, and ensures prolonged seal and bearing life under heavy loads.
Optimized for High-Volume Solids Handling: The open impeller with wide-tipped vanes is designed to efficiently pass solids and viscous slurries at high volumes, minimizing clogging and maintaining performance.
Proven in Critical Applications: The preferred choice for high-demand applications such as offshore and onshore drilling fluid systems, large-scale dredging projects, and major solids control operations, where pump failure is not an option.
Complete Model Series:
3×2×13, 4×3×13, 5×4×14, 6×5×11, 6×5×14, 8×6×11, 8×6×14, and 10×8×14, offering a scalable solution for virtually every flow and pressure requirement across industries.
Typical Applications:
High-pressure drilling mud and fluid transfer
Large-capacity dredging and sand mining
Major mineral processing and tailings projects
Heavy-media separation and cyclone feed
Industrial waste handling with high solids content
All rights reserved. Unauthorized reproduction is prohibited. HYRIG, Since 2007, Specializing in Oilfield Rig Spares.Contact: info@hyrig.com
Inventory List - Mission Magnum Pump Components & Major Parts
| Part Number | Description | Material | Quantity | Notes |
|---|---|---|---|---|
| 648411908 | Grease Fitting | Steel | 145 | Drive End Component |
| 648408409 | Exclusion Seal, Inboard Bearing Cover | Buna-N | 38 | Drive End Component |
| 19123-01-30A | Casing, 6x5x14 | Hard Iron | 4 | Wet End Component |
| 19222-01-30A | Casing, 5x4x14 | Hard Iron | 6 | Wet End Component |
| 648408201 | Bearing, Outboard (2 Req'd) | Vendor | 24 | Drive End Component |
| 648401081 | Bolt, Outboard Bearing Cover | Steel | 78 | Drive End Component |
| 648402055 | Locknut, Outboard Bearing | Steel | 65 | Drive End Component |
| 19206-XX-30 | Impeller, 4x3x13 | Hard Iron | 8 | Wet End Component (Part # Varies) |
| 19763-01-30A | Casing, 8x6x11 | Hard Iron | 3 | Wet End Component |
| 072200017 | O-ring, Outboard Bearing Cover | Buna-N | 92 | Drive End Component |
| 648402295 | Seal, Outboard Bearing Housing | Buna-N | 42 | Drive End Component |
| 19204-XX-30 | Impeller, 3x2x13 | Hard Iron | 12 | Wet End Component (Part # Varies) |
| 641101456 | Casing, 6x5x11 | Hard Iron | 5 | Wet End Component |
| 648408359 | Oil Seal, Outboard Bearing Cover | Buna-N | 33 | Drive End Component |
| 19117-01-30A | Casing, 8x6x14 | Hard Iron | 2 | Wet End Component |
| 601408560 | Nut, Inboard Bearing Cover | Steel | 120 | Drive End Component |
| 19205-01-30A | Casing, 4x3x13 | Hard Iron | 7 | Wet End Component |
| 19121-XX-30 | Impeller, 6x5x14 | Hard Iron | 5 | Wet End Component (Part # Varies) |
| 648401057 | Bolts, Outboard Bearing Housing | Steel | 85 | Drive End Component |
| 19203-01-30A | Casing, 3x2x13 | Hard Iron | 9 | Wet End Component |
| 19121-XX-30 | Impeller, 8x6x11 | Hard Iron | 4 | Wet End Component (Part # Varies) |
| 648402105 | Lockwasher, Outboard Bearing | Steel | 70 | Drive End Component |
| 19121-XX-30 | Impeller, 6x5x11 | Hard Iron | 6 | Wet End Component (Part # Varies) |
| 19224-XX-30 | Impeller, 5x4x14 | Hard Iron | 7 | Wet End Component (Part # Varies) |
| 658404702 | Nut, Outboard Bearing Housing Jam | Steel | 58 | Drive End Component |
| 661009010 | Bearing, Inboard | Vendor | 18 | Drive End Component |
| 644308504 | Housing, Outboard Bearing | Iron | 11 | Drive End Component |
| 641102322 | Casing, 10x8x14 | Hard Iron | 1 | Wet End Component |
| 19116-A0-30 | Impeller, 8x6x14 | Hard Iron | 3 | Wet End Component (Part # Varies) |
| 661010033 | Grease Fitting | Steel | 155 | Drive End Component |
| 641101753 | Casing, 3x2x13 | Hard Iron | 10 | Wet End Component |
| 21867-XX-30 | Impeller, 10x8x14 | Hard Iron | 2 | Wet End Component (Part # Varies) |
| 641103296 | Cover, Outboard Bearing | Iron | 15 | Drive End Component |
| 641101605 | Casing, 6x5x14 | Hard Iron | 5 | Wet End Component |
| 641101902 | Casing, 4x3x13 | Hard Iron | 8 | Wet End Component |
| 641102157 | Casing, 8x6x11 | Hard Iron | 3 | Wet End Component |
| 641102058 | Casing, 5x4x14 | Hard Iron | 6 | Wet End Component |