Product Description
Our hard-seal mud valves with welding ends are engineered as permanent, high-integrity components for drilling fluid manifold systems and other abrasive fluid pipelines. The primary design feature is the welded connection, which creates a leak-proof seal with the pipeline, making it ideal for fixed installations where maximum reliability is required.
The valve employs a hard-faced gate and seat, providing exceptional resistance to erosion and wear caused by abrasive particles in drilling mud. The compact and robust design, typically featuring a monobloc forged body, ensures high pressure containment and structural strength. Operated manually, these valves provide a dependable and straightforward solution for isolating sections of the mud system, contributing to the overall safety and efficiency of drilling operations.
Technical Parameters Table
| Parameter Category | Details & Specifications |
|---|---|
| Valve Type | Hard-Seal Mud Valve (Gate Type) |
| Operation | Manual |
| End Connection | Welding |
| Primary Application | Drilling Fluid Manifolds, Abrasive Slurry Pipelines |
| Sealing Technology | Hardfaced Gate & Seat |
| Design Focus | Maximum Integrity, Abrasion Resistance, Zero Leakage |
Technical Specifications Table
| Model | Nominal Diameter | Working Pressure | Overall Dimensions (mm) | ||||
|---|---|---|---|---|---|---|---|
| mm | inch | MPa | psi | L | H | A | |
| Z63Y-50-35 | 50 | 2" | 35 | 5,077 | 230 | 443 | 70.5 |
| Z63Y-50-35* | 50 | 2" | 35 | 5,077 | 225 | 416 | 61 |
| Z63Y-50-70 | 50 | 2" | 70 | 10,153 | 275 | 445 | 74 |
| Z63Y-78-105 | 78 | 3" | 105 | 15,229 | 381 | 698 | 125 |
| Z63Y-100-35 | 100 | 4" | 35 | 5,077 | 330 | 630 | 90 |
| Z63Y-100-70 | 100 | 4" | 70 | 10,153 | 330 | 630 | 90 |
| Z63Y-130-70 | 130 | 5" | 70 | 10,153 | 454.5 | 944 | 207 |
*Note: Models with identical designations (e.g., Z63Y-50-35) appear with different dimensions, indicating potential configuration variants. Please confirm specific requirements.*
General Operating Parameters
Working Pressure Range: 35 MPa to 105 MPa (5,000 to 15,000+ PSI)
Nominal Diameter Range: DN50 to DN130 (2 inches to 5 inches)
Service Fluid: Drilling Mud, Abrasive Slurries
Design Standard: API 6A (Typical for this valve class)
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.