Secondary Seal M5526-214 for 4" 5,000 PSI DEMCO Gate Valve (Mud Valve) – Genuine Replacement Seal for Cameron DM Series | High-Pressure Elastomeric Stem Seal | Part No. M5526-214
This Secondary Seal M5526-214 is a precision-engineered replacement elastomeric seal designed specifically for 4-inch, 5,000 PSI DEMCO gate valves (mud valves) used in high-pressure drilling and oilfield applications. Fully compatible with Cameron's DEMCO Series DM gate valves—the premier gate valve in the oil and gas drilling market—this secondary seal provides critical backup sealing for the valve stem assembly. Manufactured to meet the rigorous requirements of oilfield applications, this seal ensures pressure integrity and prevents fluid migration along the stem in the most demanding environments.
Part Name: Secondary Seal
Part Number: M5526-214
Compatible Valve Size: 4 inches (4")
Pressure Rating: 5,000 PSI
Compatible Valve Brand: DEMCO Gate Valve (Mud Valve) / Cameron DEMCO Series DM
Seal Type: Secondary Stem Seal / Backup Seal
Material: High-Quality Buna-N or HNBR Elastomer (Oil-Resistant)
Part of Major Repair Kit: M5305-10016
The Secondary Seal M5526-214 is a vital sealing component for 4" 5,000 PSI DEMCO mud gate valves. This seal functions as a backup to the primary stem seal assembly, providing an additional barrier against pressure escape along the valve stem. Located within the bonnet assembly, this secondary seal ensures that even if the primary stem seal experiences wear or damage, the valve maintains pressure integrity and prevents fluid leakage to the environment.
Engineered from high-quality elastomeric materials resistant to oil, drilling mud additives, and abrasive particles, the M5526-214 secondary seal maintains its sealing properties even under extreme pressure fluctuations and temperature variations typical of drilling operations. Precision-molded to exact OEM specifications, this replacement seal restores the valve's redundant sealing capability when the original seal becomes compressed, hardened, or damaged through service life.
Redundant Sealing: Provides critical backup protection if primary stem seal compromises
Pressure Integrity: Engineered to maintain reliable sealing at full 5,000 PSI operating pressure
Fluid Compatibility: Resistant to drilling mud, oil-based fluids, water, and common well service chemicals
Abrasion Resistance: Formulated to withstand abrasive particles present in drilling fluids
Precision Fit: Manufactured to exact OEM dimensions for proper compression in the seal gland
Temperature Rating: Suitable for a wide range of oilfield operating temperatures
OEM-Compatible: Direct replacement for original DEMCO and Cameron DM series secondary seals
Quality Assurance: Individual part number M5526-214 ensures traceability and quality control
Critical Safety Component: Essential for maintaining well control and preventing environmental leaks
Inside Diameter: Precision-matched to 4" DEMCO valve stem dimensions
Cross-Section: Engineered for optimal compression in the secondary seal gland
Hardness: Optimized durometer for sealing effectiveness without extrusion
Material Options: Standard Buna-N; HNBR available for higher temperature or H2S service
This Secondary Seal M5526-214 is compatible with the following valve configurations:
Valve Model: DEMCO Series DM Gate Valve (Mud Valve)
Valve Size: 4 inches (4")
Pressure Class: 5,000 PSI
End Connections: Threaded, Weld, Flanged (where applicable for 4" 5000 PSI configurations)
Bonnet Designs: Standard bonnet, 4-bolt bonnet (J007420), 12-bolt bonnet (J017263)
This component works in conjunction with other seal components including:
Stem Seal Assembly M1951-001 (primary stem seal with bronze bushing)
Bonnet Seal M5520-439
Housing Seal M5526-226
The M5526-214 Secondary Seal is critical for maintaining pressure integrity in gate valves used in:
Drilling standpipe and mud manifold systems
High-pressure mud pump discharge lines
Well control and choke manifolds
Rotary drilling rig circulation systems
Workover and completion operations
Production testing equipment
Geothermal drilling applications
High-pressure water injection systems
Wellheads and production manifolds
H2S / Sour service environments (with appropriate material selection)
Cameron's DEMCO Series DM gate valves are recognized as the premier gate valve in the oil and gas drilling market, specifically engineered for the rigorous requirements of oilfield applications. The secondary seal is a critical safety component that provides redundant protection against stem leakage. Replacing a worn secondary seal with this genuine-equivalent M5526-214 component ensures:
Redundant Protection: Maintains dual-barrier sealing for enhanced safety
Leak-Free Operation: Prevents fluid escape along the stem pathway
Regulatory Compliance: Meets environmental containment requirements
Operational Safety: Essential for well control and personnel safety
Extended Valve Life: Prevents corrosion and damage to stem and bonnet components
Cost Efficiency: Avoids complete valve replacement through proper seal maintenance
Proper installation of the Secondary Seal M5526-214 requires:
Thorough cleaning of the seal gland area
Inspection of stem surface and gland for damage or corrosion
Light lubrication with compatible assembly lubricant
Careful positioning to prevent twisting or pinching during assembly
Verification of proper stem movement after installation
For complete valve maintenance and overhaul, the following related components are available:
| Component | Part Number |
|---|---|
| Major Repair Kit (Complete Overhaul) | M5305-10016 |
| Stem Seal Assembly (with bronze bushing) | M1951-001 |
| Stem | M7439-002 |
| Stem Screw | M7416 |
| Bonnet Seal | M5520-439 |
| Housing Seal | M5526-226 |
| Gate | M1926-002 |
| Seat | M2207-021 |
| Thrust Washer | M7426 |