Slip Inserts ,Dies 29257 for MYT 40 Tons Slip Type Elevator

2025-11-23 12:18

Product Introduction: Slip Elevator Insert - P/N 29257

Engineered for Peak Performance in Demanding Drilling Operations

This high-performance insert is designed specifically for BJ Slip Type Elevators, model MYT, capable of handling loads up to 40 tons. It is the critical component that directly grips and secures the drill pipe (2 7/8") during tripping operations. Manufactured from premium alloy steel 20CrMnTi, this insert is engineered to deliver exceptional durability, superior wear resistance, and reliable grip under the most strenuous conditions, minimizing downtime and operational costs.

Key Advantages:

  • Superior Material - 20CrMnTi Alloy Steel: This Chinese GB standard grade is equivalent to high-grade AISI 41xx series steels. It is renowned for its excellent core toughness and its responsiveness to carburizing heat treatment, making it ideal for components that require a hard, wear-resistant surface and a tough, shock-absorbing core.

  • Optimized Heat Treatment Process: Through a controlled carburizing (case hardening) process, we achieve a deep, hardened surface layer while maintaining a ductile core. This is followed by precise quenching and tempering to achieve the optimal balance of hardness and toughness.

  • Exceptional Hardness & Wear Resistance: The surface hardness of 58-62 HRC ensures maximum resistance to abrasion from the drill pipe, significantly extending the service life of the insert and reducing the frequency of replacements.

  • Engineered to Prevent Tooth Chipping/Breakage: The combination of the tough 20CrMnTi core and the advanced heat treatment process gives the insert teeth the necessary resilience to withstand high impact and shock loads without chipping or breaking. This robust design ensures a secure grip on the pipe and enhances operational safety.


Product Specification Table

Parameter CategorySpecification Details
Original Part Number29257
Compatible Elevator ModelBJ Slip Type Elevator MYT (1.315"- 2 7/8" / 40 TON)
Description2 7/8" X 1 1/2"(1.9") Slip Insert
Quantity Per Set8
Material20CrMnTi (AISI 4118 / 4120 Equivalent)
Mechanical Properties
   - Surface Hardness58 - 62 HRC
   - Core Hardness30 - 40 HRC
   - Yield Strength (Typ.)≥ 835 MPa
   - Tensile Strength (Typ.)≥ 1080 MPa
   - Impact ToughnessHigh
Chemical Composition (20CrMnTi)
   - Carbon (C)0.17 - 0.23%
   - Chromium (Cr)1.00 - 1.30%
   - Manganese (Mn)0.80 - 1.10%
   - Titanium (Ti)0.04 - 0.10%
   - Silicon (Si)0.17 - 0.37%
Key FeaturesHigh Wear Resistance, Shock-Resistant Teeth, Case-Hardened Surface, Tough Core
Primary ProcessCarburizing (Case Hardening), Quenching, and Low-Temperature Tempering

Slip Insert Inventory List

NamePart NumberCompatible Elevator ModelCapacityDescription (Pipe Size x Bite Length)
Slip Insert29256MYT40 TON2 7/8" X 2 1/16"
Slip Insert29357MYT40 TON2 7/8" X 2"
Slip Insert29257MYT40 TON2 7/8" X 1 1/2" (1.9")
Slip Insert29258MYT40 TON2 7/8" X 1 1/4" (1.66")
Slip Insert29259MYT40 TON2 7/8" X 1" (1.315")
Slip Insert24773YT75 TON2 7/8" X 2 7/8"
Slip Insert29255YT75 TON2 7/8" X 2 3/8"


Name:
Message:
Verification code:
Submit
Comment