The Sulzer OHH and OHHL are heavy duty, single stage, end suction centrifugal pumps, fully conforming to API 610 Type OH2. Designed for continuous, reliable service in the most demanding hydrocarbon, petrochemical, and refining applications, these pumps combine robust mechanical construction, high efficiency hydraulics, and extended mean time between repairs (MTBR) . The OHH features a conventional enclosed impeller for high efficiency, while the OHHL utilizes a unique semi‑open impeller – and optional inducer – for exceptional low flow, high head capability. Both models share maximum component interchangeability, simplified maintenance, and full compliance with API 610 and API 682 seal chamber requirements.
API 610 Type OH2 Compliant – Heavy duty, centerline discharge, foot‑mounted casing; bearing housing foot prohibited to maintain alignment under thermal expansion and nozzle loads.
Reinforced Casing Feet & Baseplate – Heavily reinforced to carry two times API 610 nozzle loads while maintaining cold alignment.
Pressure Casing – Designed to 20% of tensile strength + 3 mm corrosion allowance for long service life; standard 300# RF flanges, optional 600# RF high pressure casing.
Impeller Options:
OHH: Conventional enclosed impeller – optimised for best efficiency, low NPSH3, and wide operating range.
OHHL: Semi‑open impeller – specifically engineered for low flow, high head applications; larger sizes available with inducer for ultra‑low NPSH3.
Extra Heavy Duty, Large Diameter Shaft – Minimises shaft deflection at seal faces; extends mechanical seal and wear ring life.
Bearings – Opposed 40° angular contact thrust bearings with machined brass cage; C3 deep groove ball radial bearing; optional triple row thrust bearing and roller radial bearing for extreme loads.
Bearing Housing – Carbon steel construction with integral cooling fins for improved heat dissipation; four housing sizes cover entire range for maximum interchangeability; low noise fan for high ambient or high temperature service; lubrication options: ring oil, purge mist, pure mist.
API 682 Mechanical Seal & API 610 Seal Chamber – Fully cartridge type mechanical seals; API 610 seal chamber geometry provides optimal seal environment, improved flush, and extended seal life.
Wide Material Selection – API 610 material classes S-4, S-5, S-6, S-8, S-9, C-6, A-8, D-1, D-2, 317L; common alloys include 625, 825, 254 SMO, Alloy 20, Hastelloy C276, Titanium Grade 3 & Grade 12; other special materials available on request.
Temperature Range – Service temperature from -75 °C to +425 °C (-100 °F to +800 °F) .
| Parameter | 50 Hz | 60 Hz |
|---|---|---|
| Pump Sizes | 25 – 400 mm (1 – 16 in) | 25 – 400 mm (1 – 16 in) |
| Capacity | up to 2,250 m³/h | up to 10,000 US gpm |
| Head | up to 370 m | up to 1,200 ft |
| Pressure | up to 75 bar | up to 1,100 psi |
| Temperature | -75 to +425 °C | -100 to +800 °F |
| Parameter | 50 Hz | 60 Hz |
|---|---|---|
| Pump Sizes | 25 – 50 mm (1 – 2 in) | 25 – 50 mm (1 – 2 in) |
| Capacity | 1 – 60 m³/h | 4 – 260 US gpm |
| Head | up to 450 m | up to 1,500 ft |
| Pressure | up to 51 bar | up to 740 psi |
| Temperature | -75 to +425 °C | -100 to +800 °F |
Larger OHHL sizes with inducer available for ultra‑low NPSH3 requirements.
Refining – Charge stock, fractionator bottoms, light coker gas oil, ultra low sulfur diesel, heavy naphtha, reformer feed
Petrochemical & Chemical Processing – Carbonate solution, amine circulation, high temperature process fluids
Oil & Gas Production – Crude transfer, produced water, condensate
Synfuels & Nitrogenous Fertilizer – High pressure ammonia, urea, methanol processes
Gas Processing – Lean/rich amine, glycol, hydrocarbon liquids
General Industry – High temperature water, boiler feed, industrial process transfer
Sulzer Complete Pump Portfolio: Engineered Solutions for Every Industry
Sulzer offers the world's most comprehensive range of pumps, meticulously engineered to meet the demanding needs of the oil & gas, petrochemical, power, water, and industrial sectors. From high-pressure API 610/ISO 13709 process pumps to robust submersible wastewater and dewatering pumps, Sulzer provides reliable, efficient, and cost-effective pumping solutions for every stage of your operation. Our portfolio is designed for maximum interchangeability, low life-cycle costs, and compliance with the latest international standards.
Here is a detailed overview of our key pump types, categorized for your specific application requirements.
End-Suction and Overhung Pumps
These pumps are ideal for transfer, process, and general industrial duties.
ISO/ANSI/EN Pumps: General industrial pumps meeting international standards for chemical and process applications.
API 610 and ISO 13709 Pumps (Type OH): A comprehensive range of overhung process pumps fully compliant with API standards. This includes the OHH (OH2) for general refining, OHHL (OH2) for low-flow high-head services, OHV (OH3) vertical inline pumps, and the unique MPP-OHH multiphase pump with a helico-axial impeller designed to handle free gas in the process stream.
Slurry Pumps: Heavy-duty pumps engineered to handle abrasive and high-density slurries in mining and industrial processes.
Nuclear Safety Pumps: Pumps certified for safety-related duties in nuclear power plants, ensuring the highest levels of reliability.
Sewage Pumps: Robust pumps for raw sewage handling in municipal and industrial wastewater treatment.
Between Bearings Pumps (Type BB)
Designed for high-pressure, high-flow, and critical services.
Axially-Split Pumps (One and Two-Stage): Type BB1 pumps like the HSA offer ease of maintenance for pipeline, cooling water, and general service applications.
Axially-Split Multi-Stage Pumps: For medium to high-pressure applications requiring efficient, reliable performance.
Radially-Split Pumps (One, Two, and Multi-Stage): Type BB2 and BB3 barrel or ring-section pumps for the most extreme high-pressure duties, such as boiler feed water and pipeline injection. The BBS and CD models are prime examples of high-performance BB2 single-stage pumps.
Vacuum Pumps: For creating vacuum in industrial processes across various sectors.
Vertical Inline Pumps
Space-saving designs with simplified piping.
VMS Vertical Multistage Pump: A compact, high-pressure pump for water supply, boosting, and light industrial duties.
SIL Inline Process Pump Range: Standardized inline process pumps for general industrial and building services.
OHV Overhung Vertical Inline Pump: An API 610 Type OH3 pump for refinery and petrochemical applications where vertical mounting is required.
OHVL Vertical Low Flow High Head Pump: An API 610 Type OH3 variant specifically designed to cover low-flow, high-head duties.
Vertically Suspended Pumps
Ideal for sump, pit, and tank applications.
Single Casing Wet Pit Pumps: For clean or slightly contaminated liquids in deep pits or sumps.
Double Casing Canister Pumps: For volatile liquids, high-pressure applications, or where low NPSH is required.
Electric Submersible Pumps: For dewatering, mine drainage, and offshore applications.
Wastewater Pumps and Lifting Stations
Purpose-built for efficient and reliable sewage and wastewater handling.
Submersible Centrifugal Pumps: For pumping wastewater in municipal and industrial networks.
Submersible Column Pumps: For larger flows in pumping stations.
Recirculation Pumps: Specifically designed for mixed liquor recirculation in denitrification/nitrification processes.
Lifting Stations: Prefabricated or engineered stations for collecting and lifting wastewater.
Submersible Dewatering Pumps
Portable and robust pumps for construction and mining dewatering.
Centrifugal Dewatering Pumps: General purpose pumps for handling groundwater and drainage.
Centerline Dewatering Pumps: For higher head applications.
Sludge Pumps: For pumping sludge with high solid content in industrial and mining applications.
Axial Flow Elbow Pumps
High-flow, low-head pumps for circulation and large-scale water movement.
AH Axial Flow Pump: For large volume transfer in irrigation, flood control, and cooling water.
Axial Flow Pump type Ensival Moret CAHR: A heavy-duty design for corrosive and abrasive services in the chemical, mining, and fertilizer industries.
Progressing Cavity Pumps
Ideal for viscous, shear-sensitive, or solids-laden fluids.
PC Cake Pump: For high-pressure transfer of dewatered sludge cake.
PC Dosing Pump: For accurate and reliable dosing of chemicals and polymers.
PC Transfer Pump: For general transfer of viscous and abrasive media in industrial and food applications.
PC Circulation Pump: For circulation duties in processes with demanding media.
Sulzer offers a comprehensive range of centrifugal pumps fully compliant with API 610 / ISO 13709 international standards. Designed for the petroleum, petrochemical, and natural gas industries, these pumps meet the rigorous requirements for overhung, between-bearings, and vertically-suspended configurations. From single-stage process pumps to multiphase circulation units, Sulzer provides reliable, high-performance solutions for every application.
Type: API 610 (ISO 13709) Type BB2
Configuration: Between bearings, single stage, radially split
Key Feature: Widest range of hydraulic performance in the industry
Applications: Refinery processes, pipeline services, high-flow applications
Search Tags: BB2 pump, between bearings pump, single stage radially split, high flow refinery pump, API 610 BB2
Type: API 610 (ISO 13709) Type OH2
Configuration: Overhung, horizontal, centerline mounted, single stage, radially split
Applications: General refining, petrochemical processes, hydrocarbon transfer
Search Tags: OH2 pump, overhung process pump, centerline mounted pump, API 610 OH2, horizontal centrifugal pump
Type: API 610 (ISO 13709) Type OH2
Configuration: Low-flow horizontal overhung process pump
Key Feature: Covers the low-flow end of the OHH range map
Applications: Low flow refinery services, high head applications, boiler circulation
Search Tags: Low flow OH2 pump, high head overhung pump, API 610 low flow, OHHL pump
Type: API 610 (ISO 13709) Type OH3
Configuration: Overhung, vertical inline, single stage, radially split
Applications: Pipeline boosters, loading terminals, refinery transfer services
Search Tags: OH3 pump, vertical inline pump, overhung vertical pump, API 610 OH3, pipeline booster pump
Type: API 610 (ISO 13709) Type OH3
Configuration: Low-flow inline overhung process pump
Key Feature: Covers the low-flow end of the OHV range map
Applications: Low flow high head vertical services, chemical injection
Search Tags: Low flow OH3 pump, vertical low flow pump, API 610 vertical inline, OHVL pump
Type: API 610 (ISO 13709) Type OH overhung
Configuration: Horizontal, centerline mounted, single stage, radially split with helico-axial hydraulic
Key Feature: Handles free gas in the process stream
Applications: HPI/chemical circulation, multiphase processing, services with entrained gas
Search Tags: Multiphase pump, helico-axial pump, gas handling pump, OH overhung multiphase, HPI circulation pump
Compliance: Exceeds ISO 5199 and ISO 13709 (API 610) 11th edition, Type OH1
Configuration: Horizontal, single-stage end-suction
Key Feature: Heavy-duty design for demanding applications
Applications: High-pressure water services, industrial processes, heavy-duty chemical duty
Search Tags: High pressure process pump, OH1 pump, heavy duty end suction, ISO 13709 pump, NRN pump
Type: API 610 (ISO 13709) Type OH2
Configuration: Overhung, horizontal, centerline mounted, single stage, radially split
Key Feature: Highly configurable design offering reliability, high efficiency, and minimum life cycle cost
Applications: Refining, petrochemical, hydrocarbon processing, chemical services
Search Tags: PRE pump, OH2 end suction, low life cycle cost pump, configurable process pump, API 610 PRE
Type: ISO 13709 (API 610) Type OH2
Configuration: Single-stage end suction process pumps
Key Feature: High pressure special design variants using PRE hydraulics with special reinforcement
Applications: Challenging high-pressure services, boiler feed, high-pressure hydrocarbon processing
Search Tags: High pressure OH2 pump, PRER pump, PRETR pump, reinforced process pump, high pressure end suction
Type: API 610 (ISO 13709) Type OH2
Configuration: Overhung, horizontal, centerline mounted, single stage centrifugal process pump
Key Feature: Specifically designed for very low flow applications
Applications: Low flow chemical dosing, small refinery streams, pilot plants
Search Tags: Low flow OH2 pump, PRELF pump, very low flow centrifugal, API 610 low flow, miniature process pump
Compliance: Ideal for arduous industrial applications
Configuration: End suction centrifugal pump
Applications: Clean, cold or hot liquids, hydrocarbons, light chemicals, general industrial duty
Search Tags: Industrial end suction pump, ZE pump, ZF pump, hydrocarbon transfer pump, chemical duty pump
More Sulzer Pumps: