Product Positioning and Core Design
The ZE/ZF series are heavy-duty end-suction process pumps specifically designed for demanding industrial environments. Their core design philosophy centers on modular design to achieve maximum interchangeability of spare parts, thereby reducing the complexity and cost of long-term maintenance. They are particularly well-suited for handling clean, cold, or hot liquids, including hydrocarbons and light chemicals.
Key Performance and Technical Specifications
The core performance parameters of this pump series are comprehensive, making it suitable for various harsh conditions such as high pressure and high temperature:
| Parameter Category | Performance Range |
|---|---|
| Flow Rate | Up to 2,600 m³/h (11,440 US gpm) |
| Head | Up to 300 m (1,000 ft) |
| Pressure | Up to 100 bar (1,450 psi) |
| Temperature Range | Up to 425°C (800°F) |
| Discharge Size | Up to 400 mm (16 inches) |
| Maximum Speed | Up to 3,600 rpm |
Primary Application Industries and Scenarios
Leveraging their reliability and adaptability, ZE/ZF pumps play a central role in several critical global industrial sectors:
Energy and Power Industry:
Boiler Feed Water and Boosting: Used in medium-sized boiler feed water units for conventional thermal and combined-cycle power stations.
Hot Water Circulation: Used for boiler circulation in district heating plants and industrial power generation.
Condensate Extraction: Applicable to various power plants including gas-fired, biomass, solar, and coal/oil-fired stations.
Seawater Desalination:
As feed pumps, second-pass high-pressure pumps, and Energy Recovery Device (ERD) circulation pumps, they are key equipment in the core reverse osmosis (RO) desalination process.
New Energy and Chemical Industries:
Heat Transfer Fluid Circulation: Used for main and auxiliary heat transfer fluid circulation in solar thermal power stations.
Chemical and Bio-based Products: Serves processes in areas like cellulose-based bioproducts, microfibrillated cellulose, and pulp chemicals.
Technical Advantages and Design Features
The series' outstanding performance stems from numerous design elements tailored for heavy-duty applications:
Excellent Mechanical Reliability: Features a centerline-mounted design to accommodate thermal expansion without compromising shaft alignment; equipped with an extra heavy-duty shaft to minimize deflection and extend seal and bearing life.
Optimized Hydraulic and Seal Design: Provides enclosed impellers to lower Net Positive Suction Head Required (NPSHr); optimized wear rings and balance holes to maximize seal and bearing life; equipped with seal chambers conforming to API 682 standards.
Robust Structural Adaptability: The casing feet and baseplate are designed to meet API 610 standards for nozzle loads and moments and to handle increased thermal expansion; axial thrust bearings utilize back-to-back angular contact or taper roller designs to meet heavy-duty application demands.
Ease of Maintenance: Includes an easy-to-clean cooling chamber and employs a low-noise fan suitable for high ambient or operating temperatures.
In summary, the Sulzer ZE/ZF series end-suction pump is a heavy-duty solution tailor-made for demanding industrial processes. Widely used in energy, desalination, and emerging chemical fields, its modularity, high reliability, and adherence to industry standards constitute its core value.
Sulzer Complete Pump Portfolio: Engineered Solutions for Every Industry
Sulzer offers the world's most comprehensive range of pumps, meticulously engineered to meet the demanding needs of the oil & gas, petrochemical, power, water, and industrial sectors. From high-pressure API 610/ISO 13709 process pumps to robust submersible wastewater and dewatering pumps, Sulzer provides reliable, efficient, and cost-effective pumping solutions for every stage of your operation. Our portfolio is designed for maximum interchangeability, low life-cycle costs, and compliance with the latest international standards.
Here is a detailed overview of our key pump types, categorized for your specific application requirements.
End-Suction and Overhung Pumps
These pumps are ideal for transfer, process, and general industrial duties.
ISO/ANSI/EN Pumps: General industrial pumps meeting international standards for chemical and process applications.
API 610 and ISO 13709 Pumps (Type OH): A comprehensive range of overhung process pumps fully compliant with API standards. This includes the OHH (OH2) for general refining, OHHL (OH2) for low-flow high-head services, OHV (OH3) vertical inline pumps, and the unique MPP-OHH multiphase pump with a helico-axial impeller designed to handle free gas in the process stream.
Slurry Pumps: Heavy-duty pumps engineered to handle abrasive and high-density slurries in mining and industrial processes.
Nuclear Safety Pumps: Pumps certified for safety-related duties in nuclear power plants, ensuring the highest levels of reliability.
Sewage Pumps: Robust pumps for raw sewage handling in municipal and industrial wastewater treatment.
Between Bearings Pumps (Type BB)
Designed for high-pressure, high-flow, and critical services.
Axially-Split Pumps (One and Two-Stage): Type BB1 pumps like the HSA offer ease of maintenance for pipeline, cooling water, and general service applications.
Axially-Split Multi-Stage Pumps: For medium to high-pressure applications requiring efficient, reliable performance.
Radially-Split Pumps (One, Two, and Multi-Stage): Type BB2 and BB3 barrel or ring-section pumps for the most extreme high-pressure duties, such as boiler feed water and pipeline injection. The BBS and CD models are prime examples of high-performance BB2 single-stage pumps.
Vacuum Pumps: For creating vacuum in industrial processes across various sectors.
Vertical Inline Pumps
Space-saving designs with simplified piping.
VMS Vertical Multistage Pump: A compact, high-pressure pump for water supply, boosting, and light industrial duties.
SIL Inline Process Pump Range: Standardized inline process pumps for general industrial and building services.
OHV Overhung Vertical Inline Pump: An API 610 Type OH3 pump for refinery and petrochemical applications where vertical mounting is required.
OHVL Vertical Low Flow High Head Pump: An API 610 Type OH3 variant specifically designed to cover low-flow, high-head duties.
Vertically Suspended Pumps
Ideal for sump, pit, and tank applications.
Single Casing Wet Pit Pumps: For clean or slightly contaminated liquids in deep pits or sumps.
Double Casing Canister Pumps: For volatile liquids, high-pressure applications, or where low NPSH is required.
Electric Submersible Pumps: For dewatering, mine drainage, and offshore applications.
Wastewater Pumps and Lifting Stations
Purpose-built for efficient and reliable sewage and wastewater handling.
Submersible Centrifugal Pumps: For pumping wastewater in municipal and industrial networks.
Submersible Column Pumps: For larger flows in pumping stations.
Recirculation Pumps: Specifically designed for mixed liquor recirculation in denitrification/nitrification processes.
Lifting Stations: Prefabricated or engineered stations for collecting and lifting wastewater.
Submersible Dewatering Pumps
Portable and robust pumps for construction and mining dewatering.
Centrifugal Dewatering Pumps: General purpose pumps for handling groundwater and drainage.
Centerline Dewatering Pumps: For higher head applications.
Sludge Pumps: For pumping sludge with high solid content in industrial and mining applications.
Axial Flow Elbow Pumps
High-flow, low-head pumps for circulation and large-scale water movement.
AH Axial Flow Pump: For large volume transfer in irrigation, flood control, and cooling water.
Axial Flow Pump type Ensival Moret CAHR: A heavy-duty design for corrosive and abrasive services in the chemical, mining, and fertilizer industries.
Progressing Cavity Pumps
Ideal for viscous, shear-sensitive, or solids-laden fluids.
PC Cake Pump: For high-pressure transfer of dewatered sludge cake.
PC Dosing Pump: For accurate and reliable dosing of chemicals and polymers.
PC Transfer Pump: For general transfer of viscous and abrasive media in industrial and food applications.
PC Circulation Pump: For circulation duties in processes with demanding media.
Sulzer offers a comprehensive range of centrifugal pumps fully compliant with API 610 / ISO 13709 international standards. Designed for the petroleum, petrochemical, and natural gas industries, these pumps meet the rigorous requirements for overhung, between-bearings, and vertically-suspended configurations. From single-stage process pumps to multiphase circulation units, Sulzer provides reliable, high-performance solutions for every application.
Type: API 610 (ISO 13709) Type BB2
Configuration: Between bearings, single stage, radially split
Key Feature: Widest range of hydraulic performance in the industry
Applications: Refinery processes, pipeline services, high-flow applications
Search Tags: BB2 pump, between bearings pump, single stage radially split, high flow refinery pump, API 610 BB2
Type: API 610 (ISO 13709) Type OH2
Configuration: Overhung, horizontal, centerline mounted, single stage, radially split
Applications: General refining, petrochemical processes, hydrocarbon transfer
Search Tags: OH2 pump, overhung process pump, centerline mounted pump, API 610 OH2, horizontal centrifugal pump
Type: API 610 (ISO 13709) Type OH2
Configuration: Low-flow horizontal overhung process pump
Key Feature: Covers the low-flow end of the OHH range map
Applications: Low flow refinery services, high head applications, boiler circulation
Search Tags: Low flow OH2 pump, high head overhung pump, API 610 low flow, OHHL pump
Type: API 610 (ISO 13709) Type OH3
Configuration: Overhung, vertical inline, single stage, radially split
Applications: Pipeline boosters, loading terminals, refinery transfer services
Search Tags: OH3 pump, vertical inline pump, overhung vertical pump, API 610 OH3, pipeline booster pump
Type: API 610 (ISO 13709) Type OH3
Configuration: Low-flow inline overhung process pump
Key Feature: Covers the low-flow end of the OHV range map
Applications: Low flow high head vertical services, chemical injection
Search Tags: Low flow OH3 pump, vertical low flow pump, API 610 vertical inline, OHVL pump
Type: API 610 (ISO 13709) Type OH overhung
Configuration: Horizontal, centerline mounted, single stage, radially split with helico-axial hydraulic
Key Feature: Handles free gas in the process stream
Applications: HPI/chemical circulation, multiphase processing, services with entrained gas
Search Tags: Multiphase pump, helico-axial pump, gas handling pump, OH overhung multiphase, HPI circulation pump
Compliance: Exceeds ISO 5199 and ISO 13709 (API 610) 11th edition, Type OH1
Configuration: Horizontal, single-stage end-suction
Key Feature: Heavy-duty design for demanding applications
Applications: High-pressure water services, industrial processes, heavy-duty chemical duty
Search Tags: High pressure process pump, OH1 pump, heavy duty end suction, ISO 13709 pump, NRN pump
Type: API 610 (ISO 13709) Type OH2
Configuration: Overhung, horizontal, centerline mounted, single stage, radially split
Key Feature: Highly configurable design offering reliability, high efficiency, and minimum life cycle cost
Applications: Refining, petrochemical, hydrocarbon processing, chemical services
Search Tags: PRE pump, OH2 end suction, low life cycle cost pump, configurable process pump, API 610 PRE
Type: ISO 13709 (API 610) Type OH2
Configuration: Single-stage end suction process pumps
Key Feature: High pressure special design variants using PRE hydraulics with special reinforcement
Applications: Challenging high-pressure services, boiler feed, high-pressure hydrocarbon processing
Search Tags: High pressure OH2 pump, PRER pump, PRETR pump, reinforced process pump, high pressure end suction
Type: API 610 (ISO 13709) Type OH2
Configuration: Overhung, horizontal, centerline mounted, single stage centrifugal process pump
Key Feature: Specifically designed for very low flow applications
Applications: Low flow chemical dosing, small refinery streams, pilot plants
Search Tags: Low flow OH2 pump, PRELF pump, very low flow centrifugal, API 610 low flow, miniature process pump
Compliance: Ideal for arduous industrial applications
Configuration: End suction centrifugal pump
Applications: Clean, cold or hot liquids, hydrocarbons, light chemicals, general industrial duty
Search Tags: Industrial end suction pump, ZE pump, ZF pump, hydrocarbon transfer pump, chemical duty pump
More Sulzer Pumps: