XQ114/9W Hydraulic Low Stress Power Tong

2025-12-25 17:43

Product Introduction: XQ114/9W Hydraulic Low Stress Power Tong

The XQ114/9W Hydraulic Low Stress Power Tong is engineered for the quick make-up and break-out of special threaded and material tubing (2 7/8"~4 1/2") and casing (4 1/2" ~5 1/2") during well service operations. It is specifically compatible with a range of premium threads, including FOX, VAM TOP, BGT1, and 3SB, among others, and is suitable for use with C.R.A. (Corrosion Resistant Alloy) tubulars such as 9Cr, 13Cr, 22Cr, and 25Cr.

The tong employs a three-jaw gripping mechanism (tri-grip) for both the master and backup tongs to ensure secure handling. It utilizes a four-speed shifting system for flexible operation and is equipped with a safety door interlocking device for enhanced operational safety. An optional torque control system, along with a dual-pump power unit, is available for precise torque management.

All rights reserved. Unauthorized reproduction is prohibited.
HYRIG, Since 2007, Specializing in Oilfield Rig Spares.
Contact: info@hyrig.com


Technical Parameter Table

ParameterSpecification
ModelXQ114/9W
Application Range2 3/8" ~ 4 1/2"
High Gear Torque1,670 N.m @ 12 MPa / 1,232 ft-lbs @ 1,740 psi
Low Gear Torque9,000 N.m @ 12 MPa / 6,630 ft-lbs @ 1,740 psi
High Gear Speed81 r/min
Low Gear Speed15 r/min
Oil Flow100 L/min / 26 gpm
Dimension (L x W x H)900 x 570 x 600 mm
Weight (including Backup Tong)260 kg / 620 lbs


Name:
Message:
Verification code:
Submit
Comment