Z23Y Mud Valves
  • Z23Y Mud Valves
  • 1/1
  • Z23Y Mud Valves

Z23Y Mud Valves

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
Z23Y Mud Valves is mainly applicable for put-through and off of medium between control pipeline and other devices, it is used for gathering drilling mud from mud bump and transmit it into mud tank so that it performs the function of opening the sealing control.
Standard API 6A
Material 4130 / 4140
Warranty 12 months
Type Gate Valve
Connetion
Hammer Union
Service
Standard
H2S
Nominal Diameter
DN50~100(2"~4")
Temperature Level
-46℃~121℃(level L-U)
Working Pressure
35~105MPa(5000psi~15000psi)
Conatct For Details
DetailReview(0)Additional
MUD GATE VALVE (METAL TO METAL SEALING)

The union ends mud gate valve is mainly used for drilling mud circulating system in oil field, It is used to control the flowing and stopping of mud.


The equipment has strong rigidity is safe and reliable, The union ends mud gate valve seat and gate are sealed by means of parallel-type Metal to Metal Sealing, The effection of sealing is good,It is convenient to open, The two ends of the valve and pipes are joined and staled with spherical movement, The movable connection of the rubber seal ring like ''O'' is not of high requirement about straightness of the two ends of pipes, When is fitted and its seal performance is very good.


Z23Y Mud Valves Features:


1 This valve, belonging to rising-stem plate gate valve, consists of valve body, valve seat, valve gate, stem, bonnet, stem nut, packing etc.

2 All parts with moist surface are made of alloy steel or stainless steel, which can meet the service requirement specified by the technology specification;   

3 The floating seat for this valve can ensure the effective seal between valve seat and gate, a nickel-base alloy layer shall be laid on the faces, so the hardness is up to 45~62HRC enough to resist the abrasion and erosion so as to prolong the working life of the product.   

4 lip-type packing can ensure the nominal seal property under the normal and high pressure.

5 Turn the hand wheel anti-clockwise, and valve executes “open” movement, while the stem enters top seal, gate flow hole is connected through with the hole of seat, so this valve shall be completely open; turn the hand wheel clockwise, and valve executes “close” movement, and at the end of closing entirely, reverse the hand wheel about 1/4 circle to make the disk at float position, so the valve creates the seal of sealing faces.





Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit