| Model | Displacement (cc/rev) | Nominal Pressure | Max Speed (rpm) | Max Flow (L/min) |
|---|---|---|---|---|
| A2FM355 | 355 | 350 bar | 2,240 | 795 |
| A2FM250 Motor | 250 | 350 bar | 2,700 | 675 |
| A2FM500 Motor | 500 | 350 bar | 2,000 | 1000 |
Data source: Technical data table.
Mounting parameters for the A2FM355 motor:
| Parameter | Specification |
|---|---|
| Mounting Flange | ISO 3019-2 |
| Drive Shaft | Splined or Straight Key |
| Port Connections | SAE Flange |
| Weight | Approx. 155 kg |
`A2FM` + `355` + `Series (6)` + `Rotation` + `Seals` + `Shaft` + `Ports`.
Example: `A2FM355/61W-VAB05` = A2FM355, 61 series, bi-directional, FKM seals, Splined shaft A, SAE ports 05.
Used in heavy-duty equipment such as large excavators, mining machinery, and heavy winches.
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
Need help determining the correct shaft type or port configuration? Contact our engineers with your system schematic.
Q: What is the max speed for the A2FM355?
A: The A2FM355 supports a maximum speed of 2,240 rpm.
Q: What is the maximum flow rate?
A: The maximum input flow rate is 795 L/min.
Q: Can I use the A2FM355 in a closed circuit?
A: Yes, it is suitable for both open and closed hydraulic circuits.
For A2FM355 axial piston motor selection and spare parts, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.