DQH Series Air Hoist | 0.5 Ton to 100 Ton Pneumatic Hoist
Overview:
HYRIG supplies the DQH Series Air Hoist and its replacement parts. These hoists are safe for hazardous environments as they do not produce electrical sparks.
| Model | Capacity | Lifting Height | Lifting Speed | Air Consumption |
|---|---|---|---|---|
| DQH0.5 | 500 kg | 0-10 m | 19 m/min | 1.2 m³/min |
| DQH3.0 | 3000 kg | 0-10 m | 10 m/min | 5.5 m³/min |
| DQH10.0 | 10000 kg | 0-10 m | 3.2 m/min | 5.5 m³/min |
| DQH100.0 | 100000 kg | 0-10 m | 1 m/min | 7.5 m³/min |
Data source: Technical data table.
The hoist uses a low-maintenance vane motor. The gears are made of high-quality tempered steel for durability. It features a built-in emergency stop button and overload protection (above 1 ton).
Used in aircraft manufacturing, chemical plants, oil depots, shipbuilding, and offshore operations. Part of the Air Hoist & Capstan range.
HYRIG provides a full range of replacement parts for the DQH series.
Specifications:
Contact Us:
For DQH Series Air Hoist selection and spare parts, contact HYRIG: info@hyrig.com
Disclaimer: This equipment is designed for hazardous environments. Ensure strict compliance with local safety standards and verify certification documents prior to operation.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.