American MP Mud Pump Parts and Spares — Weatherford MP-5, MP-8, MP-10, and MP-13/16

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
API 7K American MP mud pump parts and spares for Weatherford MP-5, MP-8, MP-10, and MP-13/16 triplex pumps. Easy wearing parts include liners, pistons, piston rubbers, valve assemblies, valve seats, valve springs, stuffing box components, seals, crosshead guides, extension rods, and piston rods. American Mud Pumps AmpX parts are 100 percent interchangeable with major OEM brands. Contact info@hyrig.com.

Conatct For Details
DetailReview(0)Additional

The American MP designation refers to aftermarket mud pump parts and expendables supplied by American Mud Pumps Inc. (AMP), designed for compatibility with Weatherford MP series triplex mud pumps including the MP-5, MP-8, MP-10, and MP-13/16 models. American Mud Pumps was established to fill the gap left when a major oilfield service company discontinued support for its own mud pump product lines. The company supplies replacement parts and consumables for mud pumps with the same superior quality as OEM parts, but with faster response and competitive pricing. AMP follows API Q1 and Q2 quality standards and ISO 9011-2015, and its AmpX parts and expendables are compatible with top American mud pump manufacturers and brands.

Weatherford MP Series Pump Specifications:

The Weatherford MP series includes the MP-5 (500 HP), MP-8 (800 HP), MP-10 (1,000 HP), and MP-13/16 (1,300 to 1,600 HP) triplex single-acting piston pumps. These pumps feature fabricated steel power-frame construction, full roller-bearing construction, double-helical gear sets, pressurized lubrication systems with internally mounted lube pumps, and valve-over-valve fluid end configurations. The MP series is widely used in land-based and offshore drilling operations.

Easy Wearing Parts for American MP and Weatherford MP Series with Part Numbers:

Power End Components:

Liner of Crosshead Upper — Part No: 1198383 (MP-5), 1124876 (MP-8/10), 1134260 (MP-13/16)

Liner of Crosshead Lower — Part No: available for all MP models

Pin of Crosshead — Part No: 1198389 (MP-5), 0908381 (MP-8/10), 908404 (MP-13/16)

Extension Rod — Part No: 1198419 (MP-5), 0908378 (MP-8/10), 908402 (MP-13/16)

Crankshaft — Part No: 1198311 (MP-5), 0908355 (MP-8/10), 0908384 (MP-13/16)

Pinion Shaft — Part No: 1198346 (MP-5), 1124723 (MP-8/10), 1134026 (MP-13/16)

Wear Ring of Pinion Shaft — Part No: 1198347 (MP-5), 1124724 (MP-8/10), 1134027 (MP-13/16)

Seal, Oil — Part No: 1198356 (MP-5), 1124733 (MP-8/10), 1844173 (MP-13/16)

Double Lip Seal — Part No: 1317783 (MP-5), 1317770 (MP-8/10), 1133825 (MP-13/16)

Connecting Rod — Part No: 1198309 (MP-5), 0908362 (MP-8/10), 908406 (MP-13/16)

Main Bearing — Part No: 1133859 (MP-13/16)

Eccentric Bearing — Part No: 1133857 (MP-13/16)

Connecting Rod Wrist Pin Bearing — Part No: 908429 (MP-13/16)

Pinion Shaft Bearings — Part No: 908359 (MP-13/16)

Taperlock Bushing — Part No: BZ 033.10

Fluid End Components:

Cylinder Heads — full range available for all MP models

Valve Lock Covers — available for all MP models

Cylinder Head Threaded Rings — available for all MP models

Cylinder Head Plugs — available for all MP models

Valve Cover Plugs — available for all MP models

Upper Valve Guides — available for all MP models

Lower Valve Guide Retainer — available for MP-13/16

Suction and Discharge Modules — available for all MP models

Liner Threaded Rings — available for all MP models

Liner Locks — available for all MP models

Wear Plates — available for all MP models

Stuffing Boxes — available for all MP models

Liners:

Grayloy Liner — available for MP-16, MP-13, MP-10, MP-8, and MP-5 triplex mud pumps

File Hard Liner — through-hardened alloy steel, excellent abrasion resistance and impact strength

High Chrome Sleeve Liner — high-chromium cast iron inner sleeve with forged steel outer sleeve, working life 800+ hours

Ceramic / Zirconia Liner — ZTA ceramic or zirconium oxide inner sleeve, extended service life for highly abrasive slurry services

Cameron OEM Liner 6 inch — Part No: EL 221

Cameron OEM Liner 6.5 inch — Part No: EL 222

Pistons and Rubber:

Bull Nose Extreme Piston — high-strength steel core with wear-resistant rubber cup

High Temp Urethane Bonded Piston — solid bonded piston for harsh environments

Urethane Bonded Piston — solid urethane bonded construction

Rubber Bonded Piston — premium rubber cup bonded to steel core

Replaceable Rubber Piston — steel core with replaceable rubber cup

Piston Nut — Part No: 1133856 (compatible with MP-5, MP-8, MP-10, MP-13, MP-16)

Piston Rod — Part No: 889438 (MP-16)

Valve Assembly and Components:

Full Open Valve — complete valve unit with optimized flow characteristics

High Temperature Valve — heat-resistant construction for demanding applications

Valve Spring — Part No: 1318029 (MP-16)

Valve Assembly — complete valve unit including valve body, valve rubber, valve seat, guide, and spring

Valve Seat — high-chrome alloy steel, heat treated for wear resistance and sealing

Seals and Gaskets:

Seal Piston Head — Part No: 0766945 (MP-16)

Gasket, Wiper Box — Part No: 1134264 (MP-16)

Oil Seal, Single Lip — Part No: 915611 (MP-13/16)

Oil Seal, Double Lip — Part No: 915605 (MP-13/16)

O-Ring 140 x 7 HNBR — Part No: 1124898 (MP-16)

Spring, Diaphragm Stuffing Box — Part No: 1123535 (MP-16)

Materials and Construction:

Each American MP part is made from materials selected for demanding oilfield service. Liners are available in file hard, high chrome, ceramic, and zirconia configurations to suit different pressure and abrasion conditions. Pistons use high-strength steel cores with urethane, rubber, or replaceable cup designs. Valve bodies and seats use forged alloy steel with advanced heat treatment. Power end components use alloy steel with precise heat treatment for fatigue resistance. Seals use NBR, HNBR, or urethane compounds suitable for water-based, oil-based, and synthetic drilling fluids. All parts are precision machined to OEM standards for 100 percent interchangeability and are manufactured following API Q1 and Q2 quality standards.

Key Performance Advantages:

American MP (AmpX) parts and expendables offer high wear resistance, reliable sealing, and long service life, with 100 percent interchangeability with major OEM pump brands. AMP provides a one-year warranty on all products, covering defects in material and workmanship under normal use and service. The company supplies a complete mud pump support package including equipment, aftermarket parts, engineering support, and field services, creating a more connected approach to equipment support. Parts are compatible with water-based, oil-based, and synthetic drilling fluids.

Applications:

These parts are suitable for oil and gas drilling, deep well drilling, high-pressure drilling, land and offshore rigs, well service, workover operations, and industrial grouting. American MP parts are compatible with Weatherford MP-5, MP-8, MP-10, MP-13/16, E-447, and E-2200 mud pumps, as well as National, Gardner Denver, EMSCO, OILWELL, IDECO, LEWCO, EWECO, and Drillmec pump models.

Compatibility:

All listed parts are direct replacements for Weatherford MP series mud pump components. American Mud Pumps AmpX parts are compatible with major OEM pump brands including National (7-P-50 through 14-P-220), Gardner Denver (PAH-275, PZ-7 through PZ-11), EMSCO (F350 through FC2200), OILWELL (A350PT through A1700PT), IDECO (T500 through T1600), Weatherford (MP-5, MP-8, MP-10, MP-13/16, E-447, E-2200), LEWCO (W-440 through W-2215), EWECO (E-447 through E-1600), and Drillmec (7TS500 through 14T2200). No modification is required for installation.

Order Information:

MOQ: 5 pieces or sets, depending on the part. Custom materials, colors, and branding available. Standard export packaging. Delivery from stock or short lead time. For pricing, technical data sheets, or OEM inquiries, please contact us at info@hyrig.com.

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit