Are you searching for a China-made API 610 pump suitable for sour water applications?
This series includes OH2, BB2, VS1, VS2 models, strictly manufactured according to the latest API 610 (centrifugal pumps for petroleum, petrochemical, and natural gas industries) standard, engineered with corrosion-resistant alloys and dual sealing systems for sour water service (refinery sour water stripper feed, ammonia & H₂S containing process condensate, gas plant sour water, acidic produced water from oil/gas fields, and petrochemical wastewater streams containing hydrogen sulfide, mercaptans, ammonia, chlorides, and other corrosive species).
With high reliability, excellent resistance to sulfide stress cracking (SSC) and pitting, long service life (≥30 years), and leak-free operation, our pumps cover all sour water handling scenarios – from low pressure pit extraction to high pressure stripper feed, from horizontal installation to vertical wet well or sump extraction.
Full API 610 Compliance (with sour service design) – Designed per API 610 latest edition with NACE MR0175/ISO 15156 compliant materials for H₂S service. Passed strict dynamic balancing and hydrostatic tests. Design life ≥30 years, continuous trouble-free operation ≥3 years.
Specialized Materials for Sour Water – Wetted parts available in 316L stainless steel (moderate H₂S, chloride limited), Duplex 2205/2507 (excellent against chloride pitting & SSC), or Titanium Grade 2/12 (severe chloride+acidic conditions). All materials meet NACE requirements for sour service.
API 682 Dual Mechanical Seals – Standard double mechanical seal arrangement (Plan 52 or 53B) with inert barrier fluid ensures zero fugitive emission of toxic H₂S. Seal faces: tungsten carbide vs carbon or silicon carbide.
Complete Model Coverage for Sour Water – Four models cover flow 9–4600 m³/h, head 8–300 m (OH2/BB2) or 10–4600 m³/h with head 10–300 m (VS1/VS2). One-stop solution for sour water duties: sump extraction, pit transfer, stripper feed, and high-flow circulation.
Flexible Installation – OH2 centerline mount for high temperature sour water; BB2 radial split for high pressure/high flow; VS1 vertical diffuser wet pit for low NPSH sumps; VS2 vertical volute wet pit for medium head with excellent anti-cavitation.
Features: Horizontal single-stage, centerline support, end suction/top discharge – excellent thermal stability, anti-thermal deformation, suitable for high temperature continuous operation (up to 200°C).
Sour water applications: High temperature sour water transfer from refinery desalters or condensate drums to sour water stripper feed, hot sour water circulation in amine regeneration units, high pressure feed to stripper columns.
Commonly searched as: high temperature sour water pump / centerline mounted H2S service pump / OH2 API 610.
Features: Horizontal single-stage, double-suction, radial split, centerline mounting – high rigidity, high pressure sealing performance, suitable for high temperature (up to 150°C) and high pressure (up to 5.0 MPa) heavy duty with NACE compliant alloys.
Sour water applications: Large volume sour water transfer from atmospheric storage pits to stripper feed pumps (boosting), high pressure sour water injection for disposal wells, mainline sour water circulation in treatment plants, loading of treated water to downstream units.
Searches matched: high pressure sour water pump / API 610 BB2 for stripper feed.
Features: Vertical single-case, diffuser structure, wet pit installation – high hydraulic efficiency, large flow/low-medium head up to 120 m, excellent low NPSH performance.
Sour water applications: Open pit or sump extraction of sour water from collection basins, oily water separators, equalization tanks; low NPSH pumping from below-grade wet wells; primary lift from sour water tanks to treatment units; large volume transfer from API separators.
Searches matched: vertical wet pit sour water pump / low NPSH sump pump for H2S / VS1 API 610.
Features: Vertical single-case, volute structure, wet pit installation – excellent anti-cavitation performance, small-medium flow (20–1200 m³/h) with medium-high head (30–300 m), suitable for variable duty operation.
Sour water applications: Deep sump extraction where head requirement exceeds VS1 capability (up to 300 m), high head sour water lift from deep collection pits to stripper feed; small to medium flow sour water transfer with good NPSH behavior; suction lift from low liquid levels.
Searches matched: deep well sour water pump / vertical volute pump for H2S service / VS2 API 610.
| Model | Flow (m³/h) | Head (m) | Max Temp (°C) | Working Pressure (MPa) | Standard Materials |
|---|---|---|---|---|---|
| OH2 | 9–2600 | 8–300 | 200 | ≤5.0 | 316L, Duplex 2205, Ti |
| BB2 | 84–1700 | 65–250 | 150 | ≤5.0 (higher on request) | 316L, Duplex 2507, Ti |
| VS1 | 50–4600 | 10–120 | 120 | ≤2.0 | Duplex 2205, 316L |
| VS2 | 20–1200 | 30–300 | 120 | ≤3.0 | Duplex 2205/2507, Ti |
| Service Severity | Recommended Materials | Comments |
|---|---|---|
| Low H₂S (<100 ppm), low Cl⁻ | 316L stainless steel | Acceptable if properly heat treated |
| Moderate H₂S, chlorides <500 ppm | Duplex 2205 (UNS S32205) | Excellent SSC & pitting resistance |
| High H₂S, high chlorides, acidic | Super Duplex 2507 | Very high PRE (>40) |
| Severe (high H₂S + Cl⁻ + low pH) | Titanium Grade 2 or 12 | Best resistance, NACE compliant |
| Casing/impeller/shaft materials: As recommended above. | ||
| Seal: API 682 dual mechanical seal (unpressurized Plan 52 or pressurized Plan 53B) with barrier fluid. Seal faces: tungsten carbide vs carbon (with appropriate O-rings – FKM or FFKM). | ||
| Bolting and fittings: NACE compliant (e.g., B7M or L7M grades). | ||
| Bearing: High-precision rolling bearing with cooling (for hot sour water). |
Q: Which API 610 pump model is best for high temperature sour water stripper feed (120°C, H₂S present)?
A: OH2 centerline-mounted with Duplex 2205 or 316L (if chlorides low) and API 682 dual seals (Plan 53B) to prevent H₂S leakage. The centerline mounting eliminates thermal distortion.
Q: Which model is best for extracting sour water from a large open collection pit (low NPSH, high flow)?
A: VS1 vertical diffuser wet pit pump – designed for low NPSH, high flow (up to 4600 m³/h), immersed installation. Use Duplex 2205 to resist pit potential corrosion.
Q: What are the advantages of VS2 over VS1?
A: VS2 (volute casing) provides higher head (up to 300 m) while maintaining good anti-cavitation performance. It is suitable for deeper pits or when head requirement exceeds 120 m.
Q: Can I use BB2 for high pressure sour water injection into disposal wells?
A: Yes, BB2 radial split pump delivers high pressure (up to 5.0 MPa) with double suction for axial thrust balance. Use Super Duplex 2507 or Titanium for high chlorides, and dual mechanical seals.
Q: How do you prevent H₂S leakage?
A: All models are equipped with API 682 double mechanical seals (unpressurized Plan 52 or pressurized Plan 53B) with barrier fluid monitoring. Leak detection and containment are standard.
Q: Are these pumps made in China?
A: Yes, we are a Chinese manufacturer certified to API 610 and NACE MR0175 for sour service. All materials are fully traceable.
Q: What is the design life and MTBF?
A: Design life ≥30 years, continuous trouble-free operation ≥3 years for sour water service with correct material selection.
Q: Do you provide NACE documentation?
A: Yes, full material traceability, hardness testing, and NACE compliance certification for wetted parts upon request.
Corrosion & cracking resistant – Duplex, super duplex, or titanium to handle H₂S, ammonia, chlorides, low pH.
Zero emissions – API 682 dual mechanical seals with barrier fluid prevent toxic H₂S release.
Targeted model coverage – OH2 (high temp stripper feed), BB2 (high pressure), VS1/VS2 (low NPSH pit/sump extraction).
High reliability – Designed for 24/7 continuous operation in refineries, gas plants, and petrochemical facilities.
NACE MR0175 compliant – Full sour service metallurgy and documentation.
China competitive pricing – High performance materials at affordable cost.
For inquiries, model selection, or technical support, please provide: H₂S concentration (ppm or %), NH₃ content, chlorides (ppm), pH, temperature, flow, head, NPSH available, and installation type (horizontal or wet pit). Our sour service specialists will recommend the best API 610 sour water pump with NACE compliant materials and dual sealing configuration.
Email: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.