HYRIG BB2 Ammonia Synthesis Pump – API 610 Radial Split Between-Bearing Centrifugal Pump for Ammonia Synthesis Loop Service

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG BB2 Ammonia Synthesis Pump: API 610 radial split between-bearing design for ammonia converter feed and synthesis loop circulation. Flow up to 3000 m³/h, head 50-400 m, temp -30°C to 200°C, design pressure up to 350 bar. Handles high pressure hydrogen, nitrogen, and ammonia mixture. Centerline mounted, dual bearings, API 682 high pressure seal (tandem dry gas or pressurized dual), hydrogen service materials.

Conatct For Details
DetailReview(0)Additional

Product Overview
The HYRIG BB2 Ammonia Synthesis Pump is a heavy-duty, single or two-stage, radial split, between-bearing centrifugal pump, fully compliant with API 610 (ISO 13709) standards. Specifically engineered for ammonia synthesis loop circulation and converter feed in fertilizer and chemical plants, this pump features a centerline mounted casing and between-bearing rotor support to reliably handle extremely high pressure mixtures of hydrogen (H₂), nitrogen (N₂), and liquid/gaseous ammonia (NH₃).

Ammonia synthesis pumps operate at some of the highest pressures in the chemical industry (150–350 bar) under continuous, critical service. The BB2 configuration provides the pressure containment, rotor dynamics, and seal integrity required for safe, long-term operation with hydrogen-rich, hazardous fluids.

Key Technical Parameters

  • Pump Type: API 610 BB2 Radial Split, Single or Two-Stage, Between-Bearing Centrifugal Pump

  • Flow Range: 100 – 3000 m³/h (depending on ammonia plant capacity)

  • Head Range: 50 – 400 m (single casing; multi-stage BB3/BB5 available for higher head)

  • Working Temperature: -30°C to 200°C (depending on loop position – suction chiller or converter outlet)

  • Design Pressure: Up to 350 bar (higher upon request with heavy wall forging)

  • Structure: Centerline mounted casing, between-bearing dual support (radial split)

  • Seal Standard: API 682 high pressure seal arrangements: typically tandem dry gas seal (Plan 72+75) for high pressure H₂/NH₃, or pressurized dual liquid seal (Plan 53B/54) depending on emissions requirements.

  • Materials: High strength alloy steel casing (forged or cast, Cr-Mo like AISI 4130 or F22), 316L stainless steel or 304L for internal wetted parts; anti-hydrogen embrittlement design; austenitic stainless steel for low temperature sections.

  • Application: Ammonia synthesis loop recycle pump, converter feed pump, syngas circulation in Haber-Bosch process.

Key Features

  • API 610 BB2 Compliance – International standard for high pressure, high energy pumps in continuous severe service.

  • Extreme High Pressure Capability – Heavy wall radial split casing with ring-type flanges and high strength threaded or studbolted connections, designed per ASME Section VIII Division 2 or 3.

  • Hydrogen Service Engineering – Materials selected per NACE MR0175/ISO 15156 for H₂ and H₂S resistance; attention to hydrogen induced cracking and high temperature hydrogen attack (HTLA).

  • Thermal Stability – Centerline mounting allows casing to expand without distortion during warm-up and cool-down cycles.

  • Superior Rotor Dynamics – Between-bearing dual support ensures low vibration and long bearing life at high pressure and rotational speeds.

  • High Pressure Sealing – API 682 tandem dry gas seal (Plan 72 with nitrogen buffer + Plan 75 for primary vent) eliminates process gas emissions; pressurized dual seal (Plan 53B) available where barrier fluid is preferred.

  • Easy Maintenance – Radial split casing allows rotor, bearings, and seal replacement without disturbing suction or discharge piping (back pull-out design).

  • Heavy Duty Bearings – High capacity tilting pad or multi-lobe bearings with forced oil lubrication for continuous high speed operation.

Typical Applications

  • Ammonia synthesis loop recycle pump (circulation from separator back to converter inlet)

  • Ammonia converter feed pump (fresh syngas boosting to loop pressure)

  • High pressure syngas (H₂ + N₂ + NH₃) circulation in Haber-Bosch ammonia plants

  • Other hydrogen reformer-boosted high pressure applications in petrochemical / chemical plants

Why HYRIG?
HYRIG brings world-class engineering to the most demanding ammonia synthesis applications. Each BB2 Ammonia Synthesis Pump undergoes finite element analysis for pressure containment, rotordynamics analysis for vibration-free operation, and full API 682 seal support system integration. Materials are specified to resist hydrogen attack and ammonia corrosion. HYRIG BB2 pumps deliver the reliability needed for 4–6 year run lengths in ammonia plants worldwide.

Contact Us
For technical quotation, high pressure design review, or custom engineered solutions for your ammonia loop, please email us at: info@hyrig.com

Our engineering team will respond within 24 hours with a pump selection optimized for your loop pressure, flow, and syngas composition.


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit