BTX Wastewater Stripper Feed Pumps – API 610 BB, OH & VS

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
Our API 610 BTX wastewater stripper feed pumps are available in BB, OH, and VS designs, specifically engineered for the reliable transfer of BTX‑contaminated wastewater – containing 0.14% benzene, 0.02% toluene, and 0.02% xylene – from collection sumps to stripper columns in aromatics complexes and petrochemical plants. BB pumps provide superior rotor stability for high‑flow, high‑pressure main feed duties. OH pumps offer compact solutions for smaller feed or booster services, while VS pumps handle low‑NPSH suction from wastewater sumps. Built with stainless steel and corrosion‑resistant alloys to withstand aromatic hydrocarbons and variable water chemistry. Fully API 610/ISO 13709 and NACE compliant for reliable, safe service.

Conatct For Details
DetailReview(0)Additional

Our API 610 BTX wastewater stripper feed pumps are heavy‑duty centrifugal pumps engineered specifically for the reliable transfer of BTX‑contaminated wastewater – containing low concentrations of benzene (0.14%), toluene (0.02%), and xylene (0.02%), with the balance being water – from collection sumps, accumulators, or storage tanks to stripper columns in aromatics complexes, petrochemical plants, and refining units. The BTX wastewater stripper (also called a sour water stripper or BTX stripper) removes volatile aromatic hydrocarbons from process wastewater before discharge or further treatment, ensuring environmental compliance and recovering valuable components.

The feed stream is predominantly water with trace BTX compounds, characterized by elevated temperatures (typically 80‑120°C), low NPSH availability, and potential corrosivity from dissolved gases (H₂S, CO₂) and aromatic hydrocarbons. Pumps for this service demand robust construction, reliable sealing to prevent fugitive emissions of volatile aromatic compounds, and materials resistant to corrosion from variable water chemistry. Manufactured in strict compliance with the latest edition of API 610 (ISO 13709), these pumps are designed for continuous, reliable, and safe operation. The API 610 standard provides three primary configurations – OH (Overhung), BB (Between Bearings), and VS (Vertically Suspended) – with selection based on flow rate, head, NPSH availability, and installation requirements.

API 610 Classifications for BTX Wastewater Stripper Feed Duties

  • BB – Between Bearings Pumps
    For main high‑capacity wastewater feed to stripper columns, BB pumps provide superior rotor stability and long‑term reliability. BB1 (axially split, double‑suction) and BB2 (radially split, single‑stage) configurations are commonly specified for flows from 50 to 3,000 m³/h and heads up to 200 metres. The between‑bearings arrangement minimises shaft deflection, extending seal and bearing life – critical for continuous wastewater feed operations.

  • OH – Overhung Pumps
    For moderate‑capacity wastewater feed, booster duties, or smaller stripper systems, OH pumps offer a compact and cost‑effective solution. The OH2 (horizontal, centreline‑mounted) and OH3 (vertical inline) subtypes are widely used for wastewater feed from smaller sumps, recirculation loops, and auxiliary services. Centreline mounting accommodates thermal expansion. Their back‑pull‑out design allows easy seal and impeller maintenance without disturbing piping. Single‑stage OH pumps handle flows up to 1,500 m³/h and heads up to 180 metres.

  • VS – Vertically Suspended Pumps
    In applications where wastewater is drawn from low‑NPSH sumps, underground tanks, or collection basins, VS pumps provide excellent suction performance. VS1 (vertical turbine) and VS4 (vertical sump) types submerge the impeller below the liquid level, eliminating cavitation and priming problems. Their vertical footprint saves valuable plot space in congested plant areas.

Key Performance & Design Features

  • Pressure Capability – Designed for discharge pressures from 5 barg up to 30 barg, matching stripper column operating conditions.

  • Flow & Head – Capacities from 10 m³/h to 3,500 m³/h; heads typically from 30 to 200 metres.

  • Temperature Range – Engineered for BTX‑contaminated wastewater from ambient to 120°C (248°F), with appropriate material selection.

  • NPSH Performance – VS and specially designed BB/OH pumps with inducers achieve low NPSH requirements, critical for sump and tank suction conditions.

  • Materials – Wetted parts in stainless steels (304L, 316L, duplex), and corrosion‑resistant alloys to withstand trace BTX compounds, H₂S, CO₂, and variable pH. Full NACE MR0175/ISO 15156 compliance available for sour service.

  • Sealing – API 682 mechanical seals – single or dual (tandem) seals depending on service requirements. Suitable flush plans (Plan 11, 13, 32, 53A/B) with cooling to maintain seal integrity and prevent leakage of volatile aromatic compounds.

  • Casing Design – Robust casings with replaceable wear rings; smooth internal surfaces to minimise fouling and scale deposition.

  • Bearing & Lubrication – Heavy‑duty rolling element or sleeve bearings with oil mist, forced oil, or grease; vibration and temperature monitoring for predictive maintenance.

  • Impeller Options – Closed impellers for efficient handling; open or semi‑open designs for streams with potential solids or fouling tendencies.

Typical Applications

  • BTX‑contaminated wastewater feed to stripper columns

  • Sour water transfer from collection sumps to BTX stripper units

  • Wastewater feed to benzene/toluene/xylene removal systems

  • Process water transfer in aromatics complexes and petrochemical plants

  • Feed to wastewater treatment and environmental compliance units

Industries Served

  • Petrochemicals (aromatics production, wastewater treatment)

  • Oil refineries (sour water stripping, BTX removal)

  • Chemical processing (environmental compliance)

Why Choose Our BTX Wastewater Stripper Feed Pumps?

With extensive experience in wastewater handling and full API 610 compliance, we design and manufacture BTX wastewater stripper feed pumps that deliver exceptional reliability, safety, and efficiency. Every pump undergoes rigorous performance testing, hydrostatic tests, and comprehensive NDT inspections (radiographic, ultrasonic, dye penetrant) with complete documentation to meet the most stringent international specifications. We offer customised hydraulic designs, material selections, and seal systems to match your specific wastewater composition, operating pressure, and temperature. Our engineering support includes NPSH analysis, API 684 rotor dynamics, vapour pressure evaluation, and emissions control advisory to ensure long‑term, trouble‑free operation.

Contact Us

For technical datasheets, application engineering advice, or a project‑specific quotation, please contact us at:

info@hyrig.com

Rely on our API 610 BTX wastewater stripper feed pumps to deliver reliable, safe wastewater feed for your BTX removal processes.


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit