11" Cameron Type U BOP Parts (3M-10M) | HYRIG

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG supplies fully interchangeable aftermarket spare parts and sealing elements for the Cameron Type U 11" Blowout Preventer, covering pressure ratings from 3,000 psi to 10,000 psi.
Conatct For Details
DetailReview(0)Additional

11" Cameron Type U BOP Parts (3M – 10M)

HYRIG supplies fully interchangeable aftermarket spare parts and sealing elements for the Cameron Type U 11" Blowout Preventer, covering pressure ratings from 3,000 psi to 10,000 psi.

Key Facts

  • Brand: Cameron
  • Model Family: Type U
  • Size: 11 inch
  • Pressure Rating: 3M to 10M
  • Supplier: HYRIG

Fitment Check

ConditionAction
You require standard pipe rams or variable bore rams (VBR)Select from our Standard Ram or VBR hubs below.
Your BOP requires shear capabilitiesNavigate to our SBR (Shear Blind Ram) components page.
You are replacing seals on an older BOPVerify if your model is Type U, U II, or UM. Our components are specifically engineered for the original Type U.

Common field error: Assuming Type U and Type U II 11" components are universally interchangeable. While similar, bonnet dimensions and sealing geometries differ. Always verify against the nameplate.

Not Applicable

  • Cameron Type U II
  • Cameron Type UM
  • Shaffer LWS

Verification & Compliance

  • Api Standard: API 16A
  • Nace Compliance: NACE MR0175 available for H2S service
  • Temperature Class: T-0 to T-250 (-18°C to +121°C)

Contact

Email info@hyrig.com with:

  • BOP nameplate photo (confirming Type U and pressure rating)
  • Required part number or C.S.O. size
  • Quantity and destination port

Related Pages

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit