Cameron Type U 7 1/16" Standard Pipe Rams & Packers | HYRIG

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG provides fully interchangeable Standard Pipe Ram Blocks, Packers (CAMRAM), and Top Seals for the Cameron Type U 7 1/16" BOP. Use the table below to match your C.S.O. size to the corresponding co
Conatct For Details
DetailReview(0)Additional

Key Facts

  • BOP Model: Cameron Type U, 7 1/16" bore
  • Part Type: Standard Pipe Ram Blocks, Packers (CAMRAM), and Top Seals
  • Sizing Rule: Matched strictly by C.S.O. (Closed Seal Opening) size
  • Elastomer Options: Standard Nitrile, HNBR, or CAMLAST for high temp/H2S
  • Standards: API 16A; NACE MR0175 available

C.S.O. Size Chart — Standard Pipe Ram Components

C.S.O.Ram Block P/NPacker P/NTop Seal P/N
1.315"644500-01-00-0240014001
1.66"644501-0240034003
1.90"644501-0340044004
2 1/16"644501-0440054005
2 3/8"644501-0540064006
2 7/8"644501-0640154015
3 1/2"644501-0740184018
4"644502-01-00-0140244024
4 1/2"644503-0240264026
5"644503-0340274027
5 1/2"644503-0540284028

Fitment Check

ConditionAction
You are sealing a single specific pipe sizeSelect the exact C.S.O. row above
Operating in H2S environmentsSpecify NACE MR0175 compliant HNBR or CAMLAST elastomer packers
Replacing a ram assemblyEnsure both the metal Ram Block and rubber Packer are replaced for optimal sealing

Common field error: Ordering a Top Seal based solely on BOP size without verifying the C.S.O. packer size, as top seals match the ram block geometry.

Not Applicable To

Related Pages

Contact

For Cameron Type U 7 1/16" standard pipe ram components, email info@hyrig.com with:

  • Required P/N or C.S.O. size
  • Quantity
  • Pressure rating (3M-15M)
Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit