A Charge Pump (also referred to as a Booster Pump or Makeup Pump) is a low‑flow, medium‑pressure centrifugal or positive displacement pump designed to supply the main pump with adequate inlet pressure and flow, preventing cavitation, compensating for internal leakage, and maintaining control pressure. It is an auxiliary pump that “charges” the main pump – commonly used in hydraulic systems, boiler feed water circuits, chemical processes, and oil & gas drilling.
Typical flow rates range from 10% to 15% of the main pump’s capacity, with discharge pressures typically 2 – 3.5 MPa (28 – 35 bar). Centrifugal designs are preferred for clean, low‑viscosity fluids, while gear pumps are used for higher viscosity or lubricating media.
| Industry / System | Function | Main Pump Type |
|---|---|---|
| Hydraulic systems | Makeup, compensate leakage, supply control pressure (28–34 bar) | Piston pump, vane pump |
| Boiler feed water | Pre‑pressurize high‑pressure boiler feed pump to prevent cavitation | Multistage centrifugal pump |
| Chemical processes | Provide stable inlet conditions for API 610 process pumps | Centrifugal, positive displacement |
| Oil & gas drilling | Supply mud pumps / drilling pumps, maintain circulation pressure | Triplex/duplex mud pumps |
| Parameter | Typical Value |
|---|---|
| Flow rate | 1 – 100 m³/h (typically 10‑15% of main pump) |
| Head | 20 – 350 m (2 – 3.5 MPa) |
| Temperature | –20 to 150 °C (depending on fluid) |
| Pump types | Single‑stage centrifugal, gear pump, screw pump |
| Control | Pressure relief valve, filter, low‑pressure switch |
Hyrig offers direct drop‑in replacement charge pumps for the following world‑leading brands – no baseplate or piping modifications required:
Hydraulic charge pumps: Rexroth, Sauer, Komatsu, Nachi (direct‑mount, shaft‑driven designs)
Process charge pumps (API 610): Sulzer CPE / ZPP, Flowserve Durco Mark 3 / XD, Goulds 3196 / 3700
For API 610 applications, our OH2 overhung pumps fully match the dimensions and performance of Sulzer, Flowserve, and Goulds models, providing seamless replacement for charge pump duties.
Stable pressure supply – ensures main pump NPSHa ≥ 1.2 × NPSHr
Compact, low‑flow design – 10‑20% of main pump capacity, energy efficient
Integral relief valve – prevents overpressure, protects main pump
Inlet filtration – keeps contaminants out of the main pump
Low maintenance – long service life under light duty
Direct OEM replacement – same footprint, nozzle orientation, and seal chamber
Hyrig specializes in API 610 standard process pumps (OH2, BB2, BB5, VS6). Our core strength is providing complete drop‑in replacements for Sulzer, Flowserve, and Goulds. For hydraulic charge pumps, we offer direct replacements for Rexroth, Sauer, Komatsu, and Nachi.
We offer:
Identical performance – verified by hydraulic testing
Same quality – ISO 9001, API 610, and customer‑specified materials
Full compliance – with all applicable industry standards
Better cost‑effectiveness – up to 30% savings compared to original OEM quotes
Shorter delivery times – expedited schedules available
For inquiries, please contact us at: info@hyrig.com
HYRIG API 610 OH2 Centrifugal Process Pump – Reliable Replacement for Sulzer, Flowserve & ITT Goulds
HYRIG API 610 VS6 Vertical Barrel Pump – Direct Replacement for Sulzer, Flowserve & ITT Goulds
Direct Drop-in Replacements for Sulzer, Flowserve & Goulds API 610 Pumps (OH2, BB2, BB5, VS6)
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.