TC315 Crown Block | 315 Ton & 6 Sheaves
Overview:
HYRIG can supply the TC315 crown block and its spare parts. The TC315 features a maximum load capacity of 3,150 kN (315 tons), a 6-sheave design, and a sheave outer diameter of 1,270 mm.
| Model | Max Static Load (kN) | Sheave Qty | Sheave OD (mm) | Wire Line Dia. (mm) | Overall Dimension (mm) |
|---|---|---|---|---|---|
| TC225 | 2,250 | 5 | 1,120 | 32 | 2,294 x 1,190 x 630 |
| TC315 | 3,150 | 6 | 1,270 | 32, 35 | 2,580 x 1,350 x 800 |
| TC365 | 3,650 | 6 | 1,524 | 35 | 2,699 x 1,600 x 987 |
Data source: Technical data table.
| Dimension Item | Specification |
|---|---|
| Weight | 5,648 kg |
| Frame Material | High strength steel shapes & plates |
| Sheave Groove | Intermediate frequency quenched |
The TC315 crown block is mounted at the top of the mast. It guides the drilling line between the drawworks and the traveling block. The 6-sheave design provides a 6x5 stringing system. The sheave grooves are quenched for wear resistance.
When replacing a crown block, ensure the number of sheaves (6) matches the traveling block (typically 5) and the drawworks. The 32 or 35 mm wire line diameter must be compatible with your existing drilling line.
Need to match a crown block with your traveling block? Tell us your line size and load capacity, and our engineers will assist. For heavier loads, view the TC450 Crown Block.
Used in the hoisting system of drilling rigs to support the drilling line and guide it to the drawworks.
Disclaimer: This equipment is designed for hazardous environments. Ensure strict compliance with local safety standards and verify certification documents prior to operation.
We supply replacement parts including sheaves, bearings, and shafts. Please visit our Crown Block Series page.
Specifications:
FAQ:
Contact Us:
For TC315 crown block selection and spare parts, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.