| Model | Nominal Size | Max Flow (L/min) | Max Pressure | Unloading Method |
|---|---|---|---|---|
| DB10 / DBW10 | DN10 | 250 | 35 MPa | Manual / Solenoid |
| DB15 / DBW15 | DN15 | 500 | 35 MPa | Manual / Solenoid |
| DB20 / DBW20 | DN20 | 500 | 35 MPa | Manual / Solenoid |
| DB25 / DBW25 | DN25 | 500 | 35 MPa | Manual / Solenoid |
| DB32 / DBW32 | DN32 | 650 | 35 MPa | Manual / Solenoid |
Data source: Technical data table.
Text-based mounting parameters for the 50 series (Subplate Type):
| Parameter | Specification |
|---|---|
| Mounting Interface | ISO 4401-05 to 08 (varies by size) |
| Port Connections | A, B (O-ring sizes vary) |
| Weight (DB Type) | 2.6 kg to 4.4 kg |
| Weight (DBW Type) | 3.8 kg to 5.6 kg |
The DB/DBW 50 series consists of a main valve and a pilot valve.
The model code is structured as: `DB` or `DBW` + `Size` + `A/B` + `Mounting` + `50` + `Pressure Range` + `Control Oil` + `Solenoid Voltage`.
Example: `DBW20B-50/315XYG24` = DBW type, DN20, normally closed, 50 series, 31.5 MPa setting, external supply/external drain, DC 24V solenoid.
Used in heavy machinery, metallurgy, and large hydraulic power packs for system pressure limiting, safety protection, and multi-stage pressure control.
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
Not sure whether you need a DB or DBW valve, or how to configure the X/Y pilot oil ports? Explore related models: DB/DBW 30 Series or contact our engineers with your system schematic.
Q: What is the difference between DB and DBW?
A: The DB valve only limits system pressure. The DBW valve includes a solenoid pilot valve that allows you to unload the system pressure electrically at any time.
Q: What is the maximum flow rate for the DN32 size?
A: The DN32 size supports a maximum flow rate of up to 650 L/min.
Q: What does the X and Y suffix mean in the model code?
A: X indicates external pilot oil supply, and Y indicates external pilot oil drain. If neither is specified, the valve uses internal supply and internal drain.
Q: Can I replace an old 30 series valve with a 50 series?
A: The 50 series offers higher pressure and flow, but you must verify the mounting dimensions (ISO 4401 interface) and connection port threads to ensure compatibility.
For DB/DBW 50 series pilot relief valve selection and spare parts, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.