| Model | Control Type | Max Pressure | Pilot Flow | Mounting |
|---|---|---|---|---|
| DBT | Manual Remote | 31.5 MPa | 3 L/min | Subplate |
| DBWT | Solenoid Remote | 31.5 MPa | 3 L/min | Subplate |
Data source: Technical data table.
Text-based mounting parameters for the DBT/DBWT:
| Parameter | Specification |
|---|---|
| Mounting Interface | Subplate (custom bolt pattern) |
| Port Connections | P, T (G1/4" or M14x1.5) |
| Body Length | Approx. 183 mm |
| Body Width | 57 mm |
| Weight | Approx. 3.5 kg |
The DBT valve works by sensing system pressure through a pilot line. When the pressure exceeds the spring setting, the valve opens and dumps pilot oil to the tank, which in turn controls a main relief valve in the system. The DBWT adds a solenoid valve that can dump the pilot pressure electrically, forcing the main system relief valve to unload regardless of the pressure setting.
The model code includes the valve type, size, adjustment type, and voltage (for DBWT).
Used for remote pressure setting in large hydraulic power packs, allowing the operator to adjust system pressure from a convenient location.
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
Need help choosing the adjustment type or solenoid voltage? Contact our engineers with your system specifications.
Q: What is the difference between DBT and DBWT?
A: DBT is manually adjusted for remote pressure control. DBWT includes a solenoid valve that allows the system to be unloaded electrically.
Q: What is the maximum pressure for these valves?
A: Both valves are rated for a maximum working pressure of 31.5 MPa.
Q: Can I replace a DBT with a DBWT?
A: Yes, the mounting interface is the same, but you will need to wire the solenoid for the DBWT.
For DBT/DBWT remote relief valve selection and spare parts, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.