The Breather Plug G0006160 is an original-equipment vent plug engineered for the Derrick 250 series DE-CPPREMIUM 250 centrifugal pump. This breather plug installs in the bearing housing to allow pressure equalization, preventing internal pressure buildup that could compromise bearing seals or cause lubricant leakage. As the pump operates and temperatures fluctuate, the breather enables the bearing housing to "breathe," equalizing internal pressure with the atmosphere while its internal design effectively excludes drilling fluids, water, and airborne contaminants.
Key Features & Benefits
Pressure Equalization: Allows the bearing housing to vent excess pressure as heat builds up during pump operation, preventing seal damage and lubricant leakage.
Contaminant Exclusion: Internal design blocks drilling fluids, sand, water, and atmospheric moisture from entering the bearing cavity while allowing air exchange.
Vacuum Prevention: Enables air to re-enter the housing as it cools, preventing vacuum conditions that could draw in contaminants.
Durable Construction: Manufactured from corrosion-resistant material capable of withstanding drilling fluid exposure and demanding oilfield conditions.
Bearing Protection: By preventing pressure and vacuum extremes, the breather extends bearing and seal service life.
Easy Installation: Simple threaded design allows for quick installation and replacement during routine maintenance.
Technical Specifications
| Parameter | Value |
|---|---|
| Part Number | G0006160 |
| Type | Breather / vent plug |
| Application | Bearing housing pressure equalization |
| Material | Corrosion-resistant material per Derrick spec |
| Service | Pressure relief, contaminant exclusion |
Compatibility
This breather plug (G0006160) is a direct-fit component for the Derrick DE-CPPREMIUM 250 pump series. It is designed to work with bearing housings G0006003 and all impeller sizes from 3x2x8.00 to 8x6x14 inches.
Proper Installation
Clean the breather port threads thoroughly before installation. Inspect the breather for any damage or blockage. Install the breather plug and tighten to the specified torque using appropriate tools. Ensure the vent path is unobstructed for proper pressure equalization.
Why Choose This Factory-Specified Breather?
Selecting the factory-specified breather plug ensures correct dimensions, proper vent design, and reliable sealing performance. Generic breathers may have incorrect thread fit, inadequate contaminant exclusion, or improper flow characteristics—any of which can lead to pressure buildup, seal failure, or contaminant ingress.
For pricing, availability, or technical support, please contact:
info@hyrig.com
Hyrig – Your trusted partner for Derrick pump parts and accessories.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.