Outboard Labyrinth Seal G0006158 – Standard Labyrinth Seal for Derrick 250 DE-CPPREMIUM 250 Centrifugal Pump

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
The Outboard Labyrinth Seal G0006158 is a factory-specified standard labyrinth seal for the Derrick 250 DE-CPPREMIUM 250 centrifugal pump. This non-contacting seal installs on the outboard (impeller-side) bearing housing, providing effective bearing protection through an intricate tortuous path that prevents lubricant leakage and excludes drilling fluids, water, and abrasive contaminants. The labyrinth design allows unrestricted shaft rotation without friction or wear, eliminating the heat generation and shaft scoring associated with lip-type seals. Manufactured from durable corrosion-resistant material, the seal withstands continuous pump operation, vibration, and thermal cycling.

Conatct For Details
DetailReview(0)Additional

The Outboard Labyrinth Seal G0006158 is an original-equipment standard labyrinth seal engineered for the Derrick 250 series DE-CPPREMIUM 250 centrifugal pump. This non-contacting seal installs on the outboard (impeller-side or non-drive-end) bearing housing, providing effective bearing protection through an intricate tortuous path that prevents lubricant leakage and excludes contaminants while allowing unrestricted shaft rotation.

Key Features & Benefits

  • Non-Contacting Design: The labyrinth seal operates without contacting the shaft, eliminating friction, heat generation, and wear typically associated with lip-type seals.

  • Effective Contaminant Exclusion: The tortuous path design effectively blocks drilling fluids, washdown water, sand, and airborne debris from entering the bearing cavity.

  • Lubricant Retention: Prevents grease or oil leakage from the bearing housing, maintaining proper lubrication and extending bearing service life.

  • Friction-Free Operation: No contact with the rotating shaft means zero friction drag and no wear on either the seal or the shaft surface.

  • Durable Construction: Manufactured from corrosion-resistant material capable of withstanding drilling fluid exposure and demanding oilfield conditions.

  • Standard Configuration: Factory-specified standard seal for outboard bearing protection in all Premium 250 pump configurations.

Technical Specifications

ParameterValue
Part NumberG0006158
TypeOutboard labyrinth seal (standard)
ApplicationOutboard bearing housing sealing
DesignNon-contacting labyrinth
MaterialCorrosion-resistant material per Derrick spec
ServiceLubricant retention, contaminant exclusion

Compatibility

This labyrinth seal (G0006158) is a direct-fit component for the Derrick DE-CPPREMIUM 250 pump series. It is designed to work with:

  • Outboard bearing housing G0006003 and cover G0006009

  • Shaft G0006002

  • All impeller sizes from 3x2x8.00 to 8x6x14 inches

Proper Installation

Clean the seal cavity and shaft surface thoroughly before installation. Inspect the seal for any damage. Install the seal according to Derrick's service manual, ensuring correct orientation and seating. Position the labyrinth seal drain slots at the bottom (6 o'clock position) for proper drainage. Verify that the shaft rotates freely after installation.

Why Choose This Factory-Specified Seal?

Selecting the factory-specified labyrinth seal ensures correct dimensions, proper material selection, and reliable sealing performance. Generic seals may have incorrect clearances, improper design, or inferior material—any of which can lead to lubricant leakage, contaminant ingress, and premature bearing failure.


For pricing, availability, or technical support, please contact:

info@hyrig.com

Hyrig – Your trusted partner for Derrick pump parts and accessories.


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit