Disproportionation Feed Pumps – API 610 BB5, BB, OH & VS

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
Our API 610 disproportionation feed pumps are available in BB5 barrel, BB, OH, and VS designs, specifically engineered for high‑pressure injection of aromatic feed – a toluene‑rich mixture (approximately 28% toluene, with benzene, xylenes, and ethylbenzene) – into toluene disproportionation (TDP) and selective toluene disproportionation (STDP) units for production of benzene and xylenes. BB5 barrel‑type multistage pumps are the preferred choice for extreme high‑pressure feed duties, delivering pressures up to 100 barg with double‑casing integrity. BB pumps provide superior rotor stability for high‑capacity feed, while OH pumps serve booster and startup services. VS pumps handle low‑NPSH suction. Built with stainless steel and corrosion‑resistant alloys. Fully API 610/ISO 13709 compliant for reliable, safe aromatic feed service.

Conatct For Details
DetailReview(0)Additional

Our API 610 disproportionation feed pumps are heavy‑duty centrifugal pumps engineered specifically for the high‑pressure injection of aromatic feed into toluene disproportionation (TDP) and selective toluene disproportionation (STDP) units – key processes in aromatics complexes that convert toluene and C9+ aromatics into benzene and mixed xylenes. The feed stream is a toluene‑rich aromatic mixture with a typical composition of approximately 27.8% toluene, 1.6% xylenes, 0.06% ethylbenzene, and 0.03% benzene, along with other C9+ aromatics. This mixed aromatic feed is charged to the disproportionation reactor where toluene is converted to benzene and xylenes via transalkylation reactions. The feed is typically at elevated temperatures (up to 150‑200°C) and moderate pressures (up to 100 barg), requiring pumps with exceptional pressure containment, thermal stability, and resistance to aromatic hydrocarbon corrosion. Manufactured in strict compliance with the latest edition of API 610 (ISO 13709), these pumps are designed for continuous, reliable, and safe operation. The API 610 standard provides three primary configurations – OH (Overhung), BB (Between Bearings), and VS (Vertically Suspended) – though the BB5 barrel‑type pump is the preferred solution for high‑pressure feed duties due to its double‑casing integrity and superior pressure handling.

API 610 Classifications for Disproportionation Feed Duties

  • BB5 Barrel‑Type Pumps (Preferred for High‑Pressure Feed)
    For the main aromatic feed to TDP/STDP reactors, the BB5 subtype (barrel‑type, double‑casing, multistage) is the preferred configuration. The inner casing contains multistage impellers, while the heavy‑walled outer barrel provides absolute pressure containment – a critical safety feature. BB5 pumps deliver heads up to 2,000 metres and flows up to 1,000 m³/h with exceptional rotor stability. The double‑casing design and centreline mounting accommodate thermal expansion and enable rapid warm‑up during startup.

  • BB – Between Bearings Pumps
    For high‑capacity aromatic feed transfer from storage or feed surge drums to the main feed pump, BB pumps provide superior rotor stability and long‑term reliability. BB2 (radially split, single‑stage) and BB3 (axially split, multistage) configurations are specified for booster duties, interstage transfer, and lower‑pressure feed applications.

  • OH – Overhung Pumps
    In disproportionation feed systems, OH pumps are typically employed for booster duties, startup circulation, or smaller feed applications where pressures are lower. The OH2 (horizontal, centreline‑mounted) and OH3 (vertical inline) subtypes provide compact, cost‑effective solutions for auxiliary services.

  • VS – Vertically Suspended Pumps
    VS pumps are used for low‑NPSH suction from feed surge drums and storage tanks. VS1 (vertical turbine) and VS6 (vertical can/barrel) types are utilised where suction conditions are challenging and floor space is limited.

Key Performance & Design Features (BB5 Focus)

  • Pressure Capability – Discharge pressures from 20 barg up to 120 barg, matching TDP/STDP reactor operating conditions.

  • Flow & Head – Capacities from 50 m³/h to 1,500 m³/h; multistage hydraulics generate heads up to 2,500 metres.

  • Temperature Range – Engineered for aromatic feed temperatures up to 200°C (392°F), with specialised thermal expansion provisions.

  • Materials – Wetted parts in stainless steels (304, 316L, duplex), and corrosion‑resistant alloys to withstand aromatic hydrocarbon corrosion. Full NACE MR0175/ISO 15156 compliance available for sour service.

  • Casing Integrity – BB5 barrel casing designed to ASME Section VIII or equivalent codes, hydrostatically tested at 1.5x maximum working pressure.

  • Sealing – API 682 dual mechanical seals with Plan 53A/B/C or Plan 72/75/76 seal support systems for volatile hydrocarbon service.

  • Advanced Balancing – Hydraulic balance drums or discs with independent leakage lines to neutralise axial thrust, coupled with heavy‑duty Kingsbury‑type thrust bearings.

  • Rotor Dynamics – Rigorous API 684 analysis ensures lateral and torsional critical speeds are well above the operating range.

  • Bearing & Lubrication – Forced oil lubrication systems with bearing temperature/vibration transmitters for continuous condition monitoring.

  • Precision Flow Control – Specialised hydraulic designs for precise, stable feed to meet reactor requirements.

Typical Applications

  • Aromatic feed to TDP (toluene disproportionation) units

  • Feed to STDP (selective toluene disproportionation) units

  • High‑pressure aromatic feed to transalkylation reactors

  • Toluene‑rich feed supply to benzene and xylene production trains

  • Mixed aromatic feed to aromatics complexes

Industries Served

  • Petrochemicals (aromatics production, benzene/xylene units)

  • Oil refineries (aromatics fractionation)

  • Chemical processing (C8 aromatic separation and upgrading)

Why Choose Our Disproportionation Feed Pumps?

With specialised expertise in high‑pressure aromatic handling and full API 610 compliance, we design and manufacture disproportionation feed pumps that deliver best‑in‑class reliability, safety, and efficiency. Every pump undergoes rigorous hydrostatic testing at 1.5x maximum working pressure, performance curve verification, mechanical running tests, and comprehensive NDT inspections (radiographic, ultrasonic, magnetic particle, dye penetrant) with full documentation to meet the most stringent owner‑operator specifications. We provide full engineering support – including API 684 rotor dynamics analysis, NPSH margin calculations, and seal system design – to ensure seamless integration into your TDP/STDP unit. All materials are supplied with complete traceability and certified test reports.

Contact Us

For technical datasheets, API 684 analysis reports, or a project‑specific quotation, please contact us at:

info@hyrig.com

Partner with us to reliably feed your toluene disproportionation unit with code‑compliant API 610 pump technology.


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit