Drilling Substructures | ZT Series for Rig Support
Overview:
HYRIG can supply the complete drilling substructure series and their spare parts. This range includes integral, telescoping, and foldable types (ZT series), designed to support the drill floor and mast for various drilling and workover rigs.
| Model | Substructure Height (m) | Max Static Load (kN) | Max Setback Capacity (m) | Type |
|---|---|---|---|---|
| ZT1470/1.4 | 1.4 | 1470 | 2000 | Integral |
| ZT1470/2.7 | 2.7 | 1470 | 3500 | Integral |
| ZT1470/3.7 | 3.7 | 1470 | 5000 | Integral |
| ZT1470/3.7-S | 3.7 | 1470 | 5000 | Telescoping |
| ZT1960/4-S | 4 | 1960 | 6000 | Telescoping |
| ZT1960/4.5-S | 4.5 | 1960 | 6000 | Telescoping |
| ZT1960/4.5-Z | 4.5 | 1960 | 6000 | Foldable |
| ZT2500/5-Z | 5 | 2500 | 3200 | Foldable |
| ZT2500/5.5-Z | 5.5 | 2500 | 3200 | Foldable |
| ZT3000/6-TZ | 6 | 3000 | 4200 | Trailer Foldable |
| ZT3000/6.7-FZ | 6.7 | 3000 | 4200 | Split Foldable |
Data source: Technical data table.
The structure design of every substructure conforms to finite element analysis and calculation. Material inspection and NDT (Non-Destructive Testing) are performed before delivery. The trailer-mounted substructure is designed for convenient transportation and installation.
Substructures are designed to support the drill floor, rotary table, and mast, while providing clearance for BOP installation. The telescoping and foldable types allow for quick rig-up and rig-down, reducing mobilization time. The double parallel/rectangular structure ensures stability.
Selecting the correct substructure requires knowing your rig model, required floor height, and maximum load.
Tell us your rig specifications, and our engineers will assist.
Used in truck-mounted drilling rigs, trailer-mounted drilling rigs, and workover rigs. Designed to meet the requirements for various drilling depths.
Disclaimer: This equipment is designed for hazardous environments. Ensure strict compliance with local safety standards and verify certification documents prior to operation.
We supply replacement parts including pins, beams, and hydraulic cylinders for the ZT series.
Specifications:
FAQ:
Contact Us:
For drilling substructure selection and spare parts, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.