EAP-D50-250 OH2 Centrifugal Pump – Complete Specifications & Dimensions
The EAP-D50-250 is a horizontal, single-stage, single-suction, centerline-mounted overhung centrifugal pump designed and manufactured according to API 610 (ISO 13709) and GB/T 5656 standards. Ideal for medium-to-high head chemical transfer, reactor feed, industrial circulation, and boiler feed water applications.
EAP-D50-250 Specifications
Model: EAP-D50-250
Inlet DN: 50 mm
Impeller Diameter: 250 mm
Flow Range: 36 – 576 m³/h
Head Range: 15 – 200 m
Speed: 2900 / 1450 r/min
Design Pressure: ≤ 2.5 MPa
Temperature Range: -40°C to +200°C
Structure: OH2 centerline-mounted
Design Standard: API 610 (11th/12th edition), GB/T 5656
Material Options: Carbon steel, stainless steel (304/316L), corrosion-resistant alloys
Key Features
OH2 centerline-mounted design – Minimizes thermal distortion and vibration for continuous heavy-duty service
Back pull-out construction – Disassemble rotating element without removing piping or motor, reducing downtime
Impeller with back vanes – Effectively reduces axial thrust
Single volute casing – Balances radial force, lowers vibration
Heavy-duty bearings – Bearing life exceeds 17,500 hours
API 682 compatible seal chamber – Supports single/double/cartridge mechanical seals
External impeller clearance adjustment – Quick calibration without disassembly
Corrosion allowance design – Long-term operation in aggressive environments
International Brand Cross-Reference
EAP-D50-250 is a direct drop-in replacement for:
Sulzer PRE 50-250
Flowserve 3700 series (equivalent size)
KSB Etanorm API 50-250
Same mounting dimensions, same hydraulic performance, no pipeline or foundation modification required.
Typical Applications
Chemical industry – Solvent and acid transfer, reactor feed and discharge, chemical intermediate circulation
Water supply & drainage – Industrial water boosting, high-pressure water transfer
Heating & thermal – High-temperature hot water circulation, boiler feed water
General industry – Lubricating oil transfer, cooling system circulation
Media Compatibility
Optimized flow channels for clean or trace particle-containing media:
Neutral water, oil products, organic solvents
Weakly corrosive media
Materials: carbon steel, stainless steel, corrosion-resistant alloys
Sealing & Flange Options
Seal configuration: API 682 compliant mechanical seals (single/double/cartridge)
Flange standards: Class 150 / Class 300, fully compatible with international OH2 pump interfaces
EAP-D50-250 Dimensions and Installation
Suction flange: DN50 (2 inch)
Discharge flange: DN50 (2 inch)
Baseplate mounting: Standard API 610 OH2 footprint
Shaft height: Same as Sulzer PRE and Flowserve 3700 equivalents
Coupling guard included
Frequently Asked Questions – EAP-D50-250
Q: What is the maximum head of EAP-D50-250?
A: 200 meters at 2900 r/min. Lower speeds available for reduced head requirements.
Q: Can EAP-D50-250 handle high-temperature fluids?
A: Yes, up to 200°C with appropriate material and seal selection.
Q: Does EAP-D50-250 directly replace Sulzer PRE 50-250?
A: Yes. It is a dimensionally and hydraulically compatible drop-in replacement.
Q: What is the bearing life?
A: Over 17,500 hours under normal operating conditions.
Q: What materials are available?
A: Carbon steel (standard), stainless steel (304/316L), and corrosion-resistant alloys upon request.
Q: What mechanical seal options are available?
A: API 682 single cartridge mechanical seal as standard. Double seals and API 682 seal plans (Plan 11, 21, 23, 52, 53A, 54) available on request.
Q: What is the lead time for EAP-D50-250?
A: Standard lead time 3-4 weeks. Express options available for urgent replacements.
Related Models
EAP-D50-315 (higher head, same flow range)
EAP-D40-250 (lower flow, same head)
EAP-D80-250 (higher flow, similar head)
View all EAP-D series models
Why Choose EAP-D50-250
API 610 compliance – high reliability for continuous operation
OH2 centerline-mounted structure – low vibration, long life
Back pull-out design – reduced maintenance downtime
Heavy-duty bearings – over 17,500 hours life
External impeller clearance adjustment – easy calibration
Cost-effective alternative to international brands
Contact Us
For price, datasheet, cross-reference confirmation, or technical support:
Email: info@hyrig.com
Our engineering team responds within 24 hours with a quote and recommendations.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.