EAP9-50-250 – Complete Specifications & Dimensions
The EAP9-50-250 is a horizontal, single-stage, single-suction, centerline-mounted (OH2) overhung centrifugal pump manufactured according to API 610 and GB/T 5656 standards. It is designed for medium-temperature, medium-to-high pressure chemical and industrial applications.
EAP9-50-250 Specifications
Model: EAP9-50-250
Inlet DN: 50 mm
Flow Range: 10 – 540 m³/h
Head Range: 30 – 200 m
Speed: 2900 / 1450 r/min
Design Pressure: ≤ 4.0 MPa (up to 5.0 MPa on request)
Temperature Range: -40°C to +300°C
Structure: OH2 (centerline-mounted)
Seal Standard: API 682
Design Standard: API 610, GB/T 5656
Material Options: Carbon steel, stainless steel, alloys as required
Key Features
OH2 centerline-mounted design – Minimizes thermal distortion, handles up to 300°C
Back pull-out construction – Maintenance without removing piping or motor
Impeller with back vanes – Reduces axial thrust
Optimized hydraulics – Wide high-efficiency zone, low NPSH
Heavy-duty bearings – Long service life
API 682 seal chamber – Supports single/double/cartridge mechanical seals
International Brand Cross-Reference
EAP9-50-250 is a direct drop-in replacement for:
Sulzer PRE 50-250
Flowserve 3700 (equivalent size)
KSB Etanorm API / RPH 50-250
Goulds 3700 / 3900 50-250
Ensival-Moret OH2 standard pump
Trillium RL 50-250
Typical Applications
Chemical processing – solvent and oil transfer
Thermal oil circulation
High-temperature hot water systems
Refinery and petrochemical medium-pressure services
Heat transfer fluid circulation
Media Compatibility
Clean media, trace particle-containing media
Neutral and weakly corrosive liquids
Oil products, water, solvents, high-temperature water, thermal oil
Frequently Asked Questions – EAP9-50-250
Q: What is the maximum operating temperature?
A: Up to 300°C with appropriate material and seal selection.
Q: What is the maximum design pressure?
A: Standard 4.0MPa. High-pressure version up to 5.0MPa available on request.
Q: Does EAP9-50-250 directly replace Sulzer PRE 50-250?
A: Yes. Identical installation dimensions and hydraulic performance.
Q: What materials are available?
A: Carbon steel, stainless steel (304/316L), duplex, and other alloys per media requirements.
Q: What is the lead time?
A: Standard lead time 4-5 weeks. Express options available.
Related Models
EAP9-50-315 (higher head)
EAP9-40-250 (lower flow, same head)
EAP9-80-315 (higher flow)
View all EAP9 series models
Contact Us
For price, datasheet, or cross-reference confirmation:
Email: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.