EAPG-50-250 – Complete Specifications & Dimensions
The EAPG-50-250 is a horizontal, single‑stage, single‑suction, centerline‑mounted (OH2) overhung centrifugal pump manufactured according to API 610 and GB/T 5656 standards. It is engineered for ultra‑high pressure (≤10.0 MPa) and extreme temperature (-40℃ to +450℃) applications in petrochemical, hydrogenation, and high‑pressure process industries.
EAPG-50-250 Specifications
Model: EAPG-50-250
Inlet DN: 50 mm
Flow Range: 36 – 576 m³/h
Head Range: 15 – 200 m
Speed: 2900 / 1450 r/min
Design Pressure: ≤ 10.0 MPa
Temperature Range: -40℃ to +450℃
Structure: OH2 (centerline‑mounted)
Seal Standard: API 682 (high‑pressure cartridge)
Design Standard: API 610, GB/T 5656
Material Options: Carbon steel (high‑pressure grade), 304/316 stainless steel, Duplex 2205, Hastelloy C‑276, Titanium
Key Features
OH2 centerline‑mounted – uniform thermal expansion, handles extreme temperature swings
Back pull‑out overhung design – maintenance without removing piping or motor
Double volute casing – balances radial force, reduces vibration
Impeller with back vanes – reduces axial thrust
Heavy‑duty bearings – bearing life >20,000 hours
API 682 high‑pressure seal chamber – supports single/double cartridge seals with flush/cooling/quench plans
Reinforced materials – for high‑pressure, high‑temperature, and corrosive media
International Brand Cross-Reference
EAPG-50-250 is a direct drop-in replacement for:
Sulzer PRE 50-250 (high‑pressure variant)
Flowserve 3700 series (equivalent size)
KSB RPH / Etanorm API 50-250
Goulds 3700 / 3900 50-250
Ensival-Moret OH2 high‑pressure pump
Same mounting dimensions, same hydraulic performance, no pipeline modification required.
Typical Applications
Petrochemical hydrogenation unit circulation
High‑pressure reactor feed and discharge
Oil‑gas mixing and transfer
High‑temperature thermal oil circulation (up to 450℃)
High‑pressure boiler feed water (ultra‑high pressure)
Offshore platform water injection
Cryogenic media transfer (with appropriate materials down to -40℃ standard, extended on request)
Dimensions & Installation
Suction flange: DN50 (2 inch) – Class 150/300 compatible
Discharge flange: DN50 (2 inch)
Baseplate mounting: Standard API 610 OH2 footprint
Shaft height: Matches Sulzer PRE and Flowserve 3700 equivalents
Frequently Asked Questions – EAPG-50-250
Q: What is the maximum design pressure?
A: 10.0 MPa. Higher pressures available on custom request.
Q: Can it handle temperatures above 450℃?
A: Standard design is -40℃ to +450℃. Higher temperatures available with special materials – contact us.
Q: What mechanical seals are recommended?
A: API 682 high‑pressure cartridge mechanical seals (single or double). We can provide seal plans 11, 21, 23, 52, 53A, 54 as required.
Q: Is it a direct replacement for Sulzer PRE 50-250?
A: Yes. Identical installation dimensions and hydraulic performance.
Q: What is the bearing life?
A: Over 20,000 hours under normal operating conditions.
Q: What is the lead time?
A: Standard lead time 5‑6 weeks. Express options available for emergency replacements.
Related Models
EAPG-50-315 (higher head, same flow range)
EAPG-40-250 (lower flow, similar head)
EAPG-80-250 (higher flow, same head)
View all EAPG series models
Contact Us
For price, datasheet, cross-reference confirmation, or technical support:
Email: info@hyrig.com
Our engineering team responds within 24 hours with a quote and recommendations.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.