The DEMCO Butterfly NF‑C Series (Cameron / SLB) is a large diameter long neck resilient seated butterfly valve engineered as the large‑bore extension of the NE‑C Series. It is specifically designed for major industrial main pipelines and insulated services where 2″ or thicker insulation is required. The extended valve neck provides ample clearance for insulation, preventing interference with actuators or gear operators.
The NF‑C Series retains all core DEMCO technologies: a dry stem design that isolates the stem from line media (no corrosion, no lubrication – truly maintenance‑free), a hard‑backed resilient seat that can be replaced by hand in the field without special tools, and bidirectional bubble‑tight shut‑off – zero leakage at full rated pressure. An integrated bronze bearing significantly reduces operating torque, making the valve easier to operate even at large diameters.
Available in both wafer (with positioning lugs) and lug connections, the NF‑C Series is fully compatible with ASME Class 150 flanges. It is widely used in large petrochemical plants, power station circulating water systems, municipal water mains, seawater desalination, marine ballast water, and oil/gas gathering mains. The series meets MSS SP‑67, API 607 4th Edition fire‑safe, and carries ABS and DNV marine approvals.
| Inch Size | DN Size | Pressure Rating (Default) | Notes |
|---|---|---|---|
| 14″ | DN350 | 150 psi (Class 150) | Wafer & lug; wafer body with positioning lugs |
| 16″ | DN400 | 150 psi (Class 150) | Wafer & lug; wafer body with positioning lugs |
| 18″ | DN450 | 150 psi (Class 150) | Wafer & lug; wafer body with positioning lugs |
| 20″ | DN500 | 150 psi (Class 150) | Wafer & lug; wafer body with positioning lugs |
| 24″ | DN600 | 150 psi (Class 150) | Wafer & lug; wafer body with positioning lugs |
| 30″ | DN750 | 150 psi (Class 150) | Wafer & lug; wafer body with positioning lugs |
| 36″ | DN900 | 150 psi (Class 150) | Wafer & lug; wafer body with positioning lugs |
Note: NF‑C Series covers 14″ to 36″ only. For small diameter long neck insulated valves (2″‑12″), refer to NE‑C Series. For short neck large diameter, custom extended stem is required.
| Size | Wafer Part Number | Lug Part Number | Notes |
|---|---|---|---|
| 14″ | 22132‑1214311 | 22132‑5114311 | Wafer with positioning lugs |
| 16″ | 22134‑1214311 | 22134‑5114311 | Wafer with positioning lugs |
| 18″ | 22136‑1214311 | 22136‑5114311 | Wafer with positioning lugs |
| 20″ | 22138‑1214311 | 22138‑5114311 | Wafer with positioning lugs |
| 24″ | 22142‑1214311 | 22142‑5114311 | Wafer with positioning lugs |
| 30″ | 22148‑1214311 | 22148‑5114311 | Approx. 380 lbs (wafer) / 420 lbs (lug) |
| 36″ | 22154‑1214311 | 22154‑5114311 | Municipal mains, large power plant systems |
Part number note: Standard configuration is Buna‑N seat, gear operator, ductile iron body, 416 stainless steel stem. NF‑C uses same coding logic as NE‑C (prefix 221XX). For special configurations: FKM seat suffix 311, EPDM seat suffix 351, electric actuator add “E” prefix (e.g., E22132‑1214311), stainless steel body add “8” in middle (e.g., 22132‑8214311). OEM versions may have “J” prefix (e.g., J022132‑1214311) – fully interchangeable. For 285 psi rating, part number prefix 22179‑22184 (heavy‑duty body).
| Category | Standard Configuration | Optional Configuration |
|---|---|---|
| Pressure Rating | 150 psi (Class 150) | 285 psi (shut‑off), 100 psi (low pressure high flow) |
| Body Material | Ductile iron ASTM A395/A536 | Aluminum bronze (ASTM B148), Carbon steel (A216 WCB), 304/316 stainless steel (A351) |
| Disc Material | Nickel‑plated ductile iron | Aluminum bronze, 316 stainless steel, Hastelloy C‑276, Monel |
| Stem Material | 416 stainless steel | 316 stainless steel, Monel |
| Seat Material | Buna‑N (Nitrile) | EPDM, FKM (Viton), PTFE encapsulated rubber |
| Connection | Wafer (with top/bottom positioning lugs), Lug | – |
| Operation | Gear operator (standard) | Electric actuator, pneumatic actuator, handwheel (smaller sizes) |
| Temperature Range | -34°C to 149°C (-29°F to 300°F) with Buna‑N | EPDM: -40°C to 177°C, FKM: -20°C to 204°C |
| Design Standards | MSS SP‑67, API 607 4th (fire‑safe) | ABS, DNV, EAC, PED (marine specifications) |
| Structural Features | Long neck, dry stem, hard‑backed seat, bronze bearing | Extended neck (for 3″ insulation), anti‑corrosion marine coating, double‑acting actuator |
Long Neck for Insulated Pipes – Clears 2″ or thicker insulation without interfering with gear operator or actuator.
Dry Stem Design – Stem never contacts line media – no corrosion, no lubrication, lifetime maintenance‑free.
Hard‑Backed Resilient Seat – Metal‑backed elastomer seat provides bidirectional bubble‑tight shut‑off. Field replaceable by hand – no special tools.
Bronze Bearing – Reduces operating torque significantly, making large diameter valves easier to operate.
Wafer with Positioning Lugs – Standard wafer body includes top and bottom lugs for easy alignment during installation.
Bidirectional Installation – No flow direction restriction – simplifies piping layout.
Fire‑Safe & Marine Approved – API 607 4th Edition fire‑safe, ABS and DNV certified.
Large Petrochemical & Refinery – cooling water mains, fire water headers, process loops
Power Generation – circulating water systems, condenser cooling, auxiliary services
Municipal Water Infrastructure – transmission mains, distribution headers, treatment plants
Seawater Desalination – intake and outfall lines, brine discharge
Marine & Offshore – ballast water systems, firefighting mains, seawater cooling
Oil & Gas – trunk lines, gathering system headers, produced water mains
The DEMCO Butterfly NF‑C Series (14″ to 36″) is the high‑reliability, low‑maintenance solution for large diameter insulated pipelines requiring bidirectional zero leakage and fire‑safe performance. Its long neck, dry stem, and bronze bearing design ensure low total cost of ownership even in the most demanding industrial environments.
Contact us for quotes, stock availability, or technical support: info@hyrig.com
For accurate selection, please specify size (14″ to 36″), connection type (wafer or lug), seat material (Buna‑N, EPDM, FKM), and operator type (gear, electric, pneumatic). For 285 psi high pressure or marine certified versions, please inquire.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.