HYRIG is a professional supplier of high-quality replacement parts for the Continental EMSCO F-800 triplex mud pump, a widely used drilling pump in oil and gas operations. The EMSCO F-800 features an 800 HP rating, a 9-inch (228.6 mm) stroke length, and is rated for 5,000 PSI. The fluid end type is Southwest 8422A. All our components are precision-engineered to meet API-7K standards and are 100 percent interchangeable with original OEM parts.
Fluid End Assembly:
Complete Fluid End Assembly (Southwest 8422A) – Part No. 8422A
Fluid End Accessories (Southwest Parts List):
Liner – Part No. 1372YXX (refer to guide for type and bore size), Qty 3
Liner Seal – Part No. 2924-4, Qty 6
Piston – Part No. XX-BYY (refer to guide for size and type), Qty 3
Piston Bushing (from 1-5/8 inch to 1-1/2 inch straight bore) – Part No. 2932, Qty 3
Piston O-Ring – Part No. 568-225, Qty 3
Piston Rod (with Elastic Stop Nut) – Part No. 1294-25, Qty 3
Piston Rod Nut – Part No. API-4ESN, Qty 3
Rod Clamp (with Water Jacket) – Part No. 6294CW, Qty 3
Hose (1/2 inch x 30 inch with 1/2 inch Male x 3/8 inch Male Connections) – Part No. 1200H30, Qty 3
Pipe (3/8 inch x 12 inch Galvanized) – Part No. 1200120, Qty 3
Bolt (3/4 inch x 3 inch Grade 8 with Lock Nut and Washer) – Part No. 4018-97, Qty 6
Pony Rod (Clamp Type) – Part No. 1200G94, Qty 3
Valve Complete – Refer to valve selection guide, Qty 6
Valve Insert – Refer to valve selection guide, Qty 6
Valve Spring – Refer to valve selection guide, Qty 6
Valve Seat – Refer to valve selection guide, Qty 6
Cylinder Head Threaded Flange – Part No. 80009800, Qty 3
Cylinder Head (Screw Gland) – Part No. 80000900, Qty 3
Cylinder Head Plug – Part No. 4622-52, Qty 3
Liner Cage – Part No. 80006200, Qty 3
Lower Valve Guide (with Bushing) – Part No. 80007800, Qty 3
Lower Valve Guide Bushing – Part No. 80006900, Qty 3
Lower Valve Guide Locking Pin – Part No. 901, Qty 6
Cylinder Head Stud – Part No. 4017-92, Qty 30
Valve Cover (with Upper Valve Guide Assembly) – Part No. 80007200, Qty 3
Upper Valve Guide – Part No. 4790-1, Qty 3
Upper Valve Guide Retainer – Part No. 4790, Qty 3
Upper Valve Guide Retainer Cap Screw – Part No. 80001500, Qty 12
Valve Cover Gasket – Part No. AJO231, Qty 3
Power End Stud (with SW Part Number HHN1500-8) – Part No. 4018-46
Fluid End Accessories (GPOT Parts List):
Complete Fluid End Module – Western Part No. 05-EMSFEMF1000CA
Lower Valve Guide Assembly – Western Part No. 05-EMSF1000LVG, OEM Part No. 6319-0087-00
Upper Valve Guide Retainer – Western Part No. 05-EMSRETAINER, OEM Part No. 6397-0603-00
Valve Pot Cover – Western Part No. 05-EMSF1000CAP, OEM Part No. 6319-0027-00
Valve Cover Gasket – Western Part No. 05-07916740, OEM Part No. 6319-0076-00
Discharge Manifold Gasket – Western Part No. 05-0-7602-1610-46, OEM Part No. 7602-1610-46
Suction Manifold Gasket – Western Part No. 05-0-7602-1600-61, OEM Part No. 7602-1600-61
Valve Guide Bushing – Western Part No. 05-EMSF1000LVGB, OEM Part No. 6316-0096-00
Valve (c/w Urethane Insert) – Western Part No. 05-ND-6-V1
Seat – Western Part No. 05-ND6-S6
Spring – Western Part No. 05-5710-115
Urethane Insert – Western Part No. 05-ND-6-I
Power End Components:
Crosshead Extension Rod – Western Part No. 05-07913075, OEM Part No. 6320-0041-00
Piston Rod – Western Part No. 05-1551701, OEM Part No. 6320-0030-00
Rod Nut – Western Part No. 05-005402052
Piston Rod Clamp – Western Part No. 05-PP600800, OEM Part No. 6320-0072-00
Liners:
Bi-metal Liners available in various bore sizes from 4 inches to 6-3/4 inches. Outer sleeve constructed of high-quality 45# carbon steel; inner sleeve made of high-chromium cast iron with HRC60+ hardness for superior wear and corrosion resistance. Ceramic and Zirconia Liners also available for extended service life.
Valves and Seats:
Valve Assembly – Available in 3-web, 4-web, and full-open designs. Manufactured from heat-treated, forged-alloy steel.
Pulsation Dampener and Relief Valve:
50003 Pulsation Dampener and 3-inch Shear Relief Valve.
All HYRIG EMSCO F-800 spare parts are manufactured from premium materials with advanced heat treatment processes to withstand demanding drilling environments. Our products are trusted by drilling contractors worldwide for their exceptional durability, consistent quality, and superior cost-effectiveness.
We offer competitive pricing, rapid global logistics, and comprehensive technical after-sales support. Whether you need standard maintenance consumables or custom-engineered solutions for specialized applications, HYRIG is your reliable long-term partner for EMSCO F-800 mud pump spare parts.
For inquiries and orders, please contact:
info@hyrig.com
HYRIG – Your Trusted Source for EMSCO F-800 Mud Pump Spare Parts
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.