The EMSCO FA-1300 is a 1,300 HP (969 kW) triplex single-acting piston pump with a 12 inch (305 mm) stroke, rated for a maximum working pressure of 5,000 PSI (34.5 MPa) and a rated stroke frequency of 120 SPM. The pump features herringbone gears with a 4.206 to 1 gear ratio, a suction manifold connection of 12 inches, a discharge manifold connection of 5.125 inch flange, and API #7 valve pots. The FA-1300 is widely used in deep well drilling, high-pressure operations, land and offshore rigs, and well service applications. Our EMSCO FA-1300 Type I mud pump parts and spares are manufactured to API 7K standards and are designed as direct replacements for OEM components.
Easy Wearing Parts for EMSCO FA-1300 Type I with OEM Part Numbers:
Fluid End Assembly:
Complete Fluid End Assembly — Southwest Part No. 8490-1A (for EMSCO FA-1600 and FA-1300 Type 2, 5000 PSI)
Liners and Pistons Performance Chart:
The FA-1300 Type I accommodates liner sizes from 4 inch to 7.5 inch. Maximum working pressure at 5,000 PSI for 4 inch to 5.5 inch liners, and pressure decreases with larger liner sizes.
Ceramic Liner — available for all standard bore sizes
Supreme Liner — available for all standard bore sizes
Piston White Lightning — Part No. PPNO 1502052 through PPNO 1502064 (4 inch to 7 inch)
Piston Green Duo — Part No. PPNO 012180170 through PPNO 012180619 (4 inch to 7 inch)
Piston Rubber Flexlip — Part No. PPNO 011102926 through PPNO 011103926
Piston Rubber Supreme — Part No. PPNO 015180102 through PPNO 015180343
Valve Assembly and Components:
Valve White Lightning Insert — Part No. PPNO 9700368
Valve Urethane Insert — Part No. PPNO 9700250
Valve Rubber Insert — Part No. PPNO 9700293
Valve Seat — Part No. PPNO 9702504
Valve Spring — available for all FA-1300 configurations
Valve Cover — Part No. PPNO 07916741
Seals and Gaskets:
Liner Gasket — Part No. PPNO 07916784 (all liner sizes)
Cylinder Head — Part No. PPNO 07916781 OEM, PPNO 07916803 Supreme
Materials and Construction:
Each EMSCO FA-1300 Type I part is made from materials selected for demanding high-pressure drilling service. Fluid end modules use high-strength alloy forged steel. Liners use forged steel outer sleeves and high-chromium cast iron inner sleeves, or ceramic for extended life. Pistons use high-strength steel cores with HNBR or polyurethane cups. Valve bodies and seats use forged alloy steel with advanced heat treatment. The power frame uses welded steel plate construction with stress relief. Gears are high-precision machined herringbone gears from heat-treated alloy steel compliant with AGMA standards. The crankshaft is made from 42CrMo or 4340 high-nickel alloy steel, dynamically balanced. All parts are precision machined to ensure proper fit and reliable performance.
Key Performance Advantages:
Our EMSCO FA-1300 Type I mud pump parts and spares offer high wear resistance, reliable sealing, and long service life. The 12 inch long stroke and lower stroke rate (120 SPM) improve suction performance and significantly extend the service life of fluid end wear parts. The modular design facilitates easy inspection, maintenance, and replacement of components, reducing downtime. Parts are compatible with water-based, oil-based, and synthetic drilling fluids.
Applications:
These parts are suitable for deep well drilling, high-pressure drilling, land and offshore rigs, well service, and workover operations.
Compatibility:
All listed parts are direct replacements for EMSCO FA-1300 Type I mud pump components. No modification is required for installation.
Order Information:
MOQ: 5 pieces or sets, depending on the part. Custom materials, colors, and branding available. Standard export packaging. Delivery from stock or short lead time. For pricing, technical data sheets, or OEM inquiries, please contact us at info@hyrig.com.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.