EMSCO FB1300 Ceramic Liner | ZTA Cylinder Liner for EMSCO FB1300 & FB1600 Mud Pumps

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
ZTA ceramic liner for EMSCO FB1300/FB1600 mud pumps. Forged 45# steel outer shell + zirconia-toughened alumina inner sleeve. Hardness 92-94 HRC, working pressure up to 7500 PSI. API 7K approved, 4000+ service hours, 100% OEM interchangeable. Ideal for abrasive & corrosive drilling conditions.

Conatct For Details
DetailReview(0)Additional

Our EMSCO FB1300 ceramic liner is a premium fluid end component engineered for extreme oil and gas drilling environments. Designed as a direct replacement for EMSCO FB1300 and FB1600 triplex mud pumps (also compatible with F-1300 and F-1600 models), this composite cylinder liner combines a forged 45# steel (AISI 1045) outer shell with a ZTA (Zirconia Toughened Alumina) ceramic inner sleeve.

Why Choose Our ZTA Ceramic Liner?

  • Superior Wear Resistance: The ZTA ceramic inner sleeve achieves 92-94 HRC hardness, resisting scratches and degradation from abrasive drilling fluids, high sand content, and corrosive chemicals. It lasts 5-10 times longer than conventional bimetal liners.

  • High-Pressure Capability: Withstands working pressure up to 7500 PSI (517 bar). The forged steel shell provides tensile strength ≥610 MPa, preventing deformation and liner slippage under extreme cyclic loads.

  • API 7K Certified: Fully complies with API 7K standards for safety and reliability in onshore, offshore, and deepwell drilling operations.

  • Longer Service Life: Proven 4000+ operating hours in real drilling conditions, reducing downtime and replacement costs by more than 50% compared to traditional liners.

  • OEM Interchangeability: Matches original EMSCO part dimensions and mounting requirements for trouble-free installation.

  • Mirror Honed Surface: 4-8 RMS finish reduces piston friction and extends packing life.

Technical Highlights

ParameterDetail
Model CompatibilityEMSCO FB1300, FB1600, F-1300, F-1600
MaterialForged 45# Steel + ZTA Ceramic
Ceramic Hardness92-94 HRC
Steel Shell HardnessHB 180-200
Max Working Pressure7500 PSI (517 bar)
Service Life4000+ hours
Surface Finish4-8 RMS (mirror honed)
CertificationAPI 7K
Supply Capacity2000 pcs/month

Ideal Applications

  • Onshore & offshore oil/gas drilling

  • Deepwell and high-pressure formations

  • Hard rock drilling with abrasive muds

  • Corrosive fluid environments (high chlorides, H₂S)

  • Critical operations requiring zero unplanned downtime

Installation & Care Tips

  • Use soft padding during installation; do not drop or strike the ceramic liner.

  • Check alignment between piston and liner to avoid eccentric wear.

  • Drain mud when pump is idle below 0°C to prevent freezing cracks.

  • Never use hard tools directly on the ceramic surface.

Global Supply & Support
With a monthly production capacity of 2000 pieces, we offer fast worldwide shipping, technical support, and custom sizing options to match your EMSCO mud pump model exactly.

Contact us today for a quote or compatibility verification.
Email: info@hyrig.com


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit