Extraction Feed Pumps – API 610 BB5, BB, OH & VS

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
Our API 610 extraction feed pumps are available in BB5 barrel, BB, OH, and VS designs, specifically engineered for high‑pressure injection of benzene‑rich feed – approximately 53% benzene, 3% toluene – into aromatics extraction units for BTX recovery. BB5 barrel‑type multistage pumps are the preferred choice for extreme high‑pressure feed duties, delivering pressures up to 100 barg with double‑casing integrity. BB pumps provide superior rotor stability for high‑capacity feed, while OH pumps serve booster and startup services. VS pumps handle low‑NPSH suction. Built with stainless steel and NACE‑compliant alloys. Fully API 610/ISO 13709 compliant for reliable, safe benzene‑rich feed service.

Conatct For Details
DetailReview(0)Additional

Our API 610 extraction feed pumps are heavy‑duty centrifugal pumps engineered specifically for the high‑pressure injection of benzene‑rich feed into aromatics extraction units – key processes in refineries and petrochemical plants that recover high‑value benzene, toluene, and xylenes (BTX) from reformate or pyrolysis gasoline. The feed stream is a benzene‑rich aromatic mixture with a typical composition of approximately 52.9% benzene, 2.79% toluene, and balance C6‑C8 aromatics and non‑aromatics. This feed is charged to the extraction unit (such as Sulfolane or similar solvent extraction processes) where aromatics are selectively recovered from non‑aromatic hydrocarbons.

The feed stream is typically at elevated temperatures (up to 150°C) and moderate to high pressures (up to 100 barg), requiring pumps with exceptional pressure containment, thermal stability, and resistance to aromatic hydrocarbon corrosion. Benzene is a highly volatile, toxic, and flammable aromatic hydrocarbon that demands absolute leak‑tight sealing and fugitive emission control. Manufactured in strict compliance with the latest edition of API 610 (ISO 13709), these pumps are designed for continuous, reliable, and safe operation. The API 610 standard provides three primary configurations – OH (Overhung), BB (Between Bearings), and VS (Vertically Suspended) – though the BB5 barrel‑type pump is the preferred solution for high‑pressure feed duties due to its double‑casing integrity and superior pressure containment.

API 610 Classifications for Extraction Feed Duties

  • BB5 Barrel‑Type Pumps (Preferred for High‑Pressure Feed)
    For the main benzene‑rich feed to aromatics extraction units, the BB5 subtype (barrel‑type, double‑casing, multistage) is the preferred configuration. The inner casing contains multistage impellers, while the heavy‑walled outer barrel provides absolute pressure containment – a critical safety feature for toxic, volatile benzene service. BB5 pumps deliver heads up to 2,500 metres and flows up to 1,000 m³/h with exceptional rotor stability. The double‑casing design and centreline mounting accommodate thermal expansion and enable rapid warm‑up during startup.

  • BB – Between Bearings Pumps
    For high‑capacity feed transfer from storage or surge drums to the main feed pump, BB pumps provide superior rotor stability and long‑term reliability. BB2 (radially split, single‑stage) and BB3 (axially split, multistage) configurations are specified for booster duties, interstage transfer, and lower‑pressure feed applications.

  • OH – Overhung Pumps
    In extraction feed systems, OH pumps are typically employed for booster duties, startup circulation, or smaller feed applications where pressures are lower. The OH2 (horizontal, centreline‑mounted) and OH3 (vertical inline) subtypes provide compact, cost‑effective solutions for auxiliary services.

  • VS – Vertically Suspended Pumps
    VS pumps are used for low‑NPSH suction from feed surge drums and storage tanks. VS1 (vertical turbine) and VS6 (vertical can/barrel) types are utilised where suction conditions are challenging and floor space is limited.

Key Performance & Design Features (BB5 Focus)

  • Pressure Capability – Discharge pressures from 20 barg up to 120 barg, matching extraction unit operating conditions.

  • Flow & Head – Capacities from 50 m³/h to 1,500 m³/h; multistage hydraulics generate heads up to 2,500 metres.

  • Temperature Range – Engineered for benzene‑rich feed temperatures up to 150°C (302°F), with specialised thermal expansion provisions.

  • Materials – Wetted parts in stainless steels (304, 316L, duplex), and corrosion‑resistant alloys to withstand benzene and aromatic corrosion. Full NACE MR0175/ISO 15156 compliance for sour service.

  • Casing Integrity – BB5 barrel casing designed to ASME Section VIII or equivalent codes, hydrostatically tested at 1.5x maximum working pressure.

  • Sealing – API 682 dual mechanical seals with Plan 53A/B/C or Plan 72/75/76 seal support systems for volatile, toxic benzene service. Dry gas seals are also available for zero‑emission compliance.

  • Advanced Balancing – Hydraulic balance drums or discs with independent leakage lines to neutralise axial thrust, coupled with heavy‑duty Kingsbury‑type thrust bearings.

  • Rotor Dynamics – Rigorous API 684 analysis ensures lateral and torsional critical speeds are well above the operating range.

  • Bearing & Lubrication – Forced oil lubrication systems with bearing temperature/vibration transmitters for continuous condition monitoring.

  • Precision Flow Control – Specialised hydraulic designs for precise, stable feed to meet extraction unit requirements.

Typical Applications

  • Benzene‑rich feed to Sulfolane and other aromatics extraction units

  • Feed to BTX recovery and purification processes

  • Reformate feed to aromatics extraction trains

  • Pyrolysis gasoline feed to extraction units

  • High‑pressure aromatic feed to solvent extraction processes

Industries Served

  • Petrochemicals (aromatics production, BTX recovery)

  • Oil refineries (aromatics complexes)

  • Chemical processing (benzene purification)

Why Choose Our Extraction Feed Pumps?

With specialised expertise in high‑pressure aromatic handling and full API 610 compliance, we design and manufacture extraction feed pumps that deliver best‑in‑class reliability, safety, and efficiency. Every pump undergoes rigorous hydrostatic testing at 1.5x maximum working pressure, performance curve verification, mechanical running tests, and comprehensive NDT inspections (radiographic, ultrasonic, magnetic particle, dye penetrant) with full documentation to meet the most stringent owner‑operator specifications. We provide full engineering support – including API 684 rotor dynamics analysis, NPSH margin calculations, benzene toxicity and emissions evaluation, and seal system design – to ensure seamless integration into your aromatics extraction unit. All materials are supplied with complete traceability and certified test reports.

Contact Us

For technical datasheets, API 684 analysis reports, or a project‑specific quotation, please contact us at:

info@hyrig.com

Partner with us to reliably feed your aromatics extraction unit with code‑compliant API 610 pump technology.


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit