| Model | Nominal Size | Max Pressure | Max Flow | Pilot Ratio |
|---|---|---|---|---|
| FD32 | DN32 | 42 MPa | 560 L/min | 1:20 |
| FD25 Valve | DN25 | 42 MPa | 320 L/min | 1:20 |
Data source: Technical data table.
Text-based mounting parameters for the FD32 (KA Type):
| Parameter | Specification |
|---|---|
| Port Thread | M64x2 (A, B, X) |
| Body Width (B1) | 66 mm |
| Body Length (L1) | 235 mm |
| Height (L11) | 289 mm |
| Weight | Approx. 7.5 kg |
The FD32 operates on the same principle as the smaller sizes. It uses a pilot-operated check valve to hold loads and control descent speed. The secondary relief valve (FB type) provides protection against pressure spikes up to 40 MPa.
`FD32` + `Mounting (KA/PA/FA/FB)` + `A/B (With/Without relief)` + `11` + `Orifice (B00/B60)`.
Used in heavy cranes, large hydraulic presses, and winches for secure load holding.
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
Need help selecting the mounting type? Contact our engineers with your system specifications.
Q: What is the max flow for the FD32?
A: The FD32 supports a maximum flow rate of 560 L/min.
Q: What O-ring is used for the FD32?
A: The FD32 uses O-ring size 38 x 3 for the main ports.
Q: Do you supply the mounting bolts?
A: Yes, bolts like 4-M16x100-10.9 can be supplied separately.
For FD32 counterbalance valve selection and spare parts, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.