The FMC BV MOD 22 Series (Weco Model 22) is a long neck high pressure resilient seated butterfly valve purpose‑built for insulated piping systems. As the dedicated insulation‑focused model within the FMC butterfly valve family, it has been trusted for decades in oil & gas, petrochemical, and power industries where high pressure isolation is required on lines with thermal insulation.
The extended valve neck provides generous clearance for ≥2″ pipe insulation, preventing interference between the insulation layer and the handle, gear operator, or actuator. The valve incorporates FMC’s patented hard‑backed resilient seat and self‑centering disc to achieve bidirectional bubble‑tight zero leakage. The nitrided 410 stainless steel stem ensures low operating torque and anti‑galling performance, even after extended service.
The Model 22 series is offered in wafer connection only (no lug option), with flange positioning holes for accurate alignment on ASME Class 125/150 flanges. It supports a wide range of conditions from vacuum to high pressure. The series meets ANSI 150 / ASME B16.34 and API standards, with ABS and DNV marine approvals available on select models.
| Model | Inch Size | DN Size | Pressure (Default) | Notes |
|---|---|---|---|---|
| Model 22 (Standard) | 2″ – 12″ | DN50‑DN300 | 175 psi (Class 150, cold working pressure) | Wafer only; long neck for ≥2″ insulation |
| Model 22 HP (High Pressure) | 2″ – 12″ | DN50‑DN300 | 285 psi (Class 150 enhanced) | Wafer only; heavy‑duty body + reinforced seat; insulation compatible |
*Note: Model 22 covers 2″‑12″ (DN50‑DN300). For 14″ and larger with insulation, custom extended neck is required. Wafer only – no lug option. For lug + insulation, refer to DEMCO NE‑C series. Model 22 shares core performance with Model 12 but adds long neck insulation design.*
| Model | Size | Wafer Part Number | Notes |
|---|---|---|---|
| Model 22 | 2″ | 3225729 | Manual lever, 175 psi, fits 2″ insulation |
| Model 22 | 3″ | 3225730 | Manual lever, 175 psi, fits 2″ insulation |
| Model 22 | 4″ | 3225731 | Manual lever, 175 psi, fits 2″ insulation |
| Model 22 | 5″ | 3225734 | Manual lever, 175 psi, fits 2″ insulation |
| Model 22 | 6″ | 3225735 | Gear operator, 175 psi, fits 2″ insulation |
| Model 22 | 8″ | 3225737 | Gear operator, 175 psi, fits 2″ insulation |
| Model 22 | 10″ | 3225739 | Gear operator, 175 psi, fits 2″ insulation |
| Model 22 | 12″ | 3225741 | Gear operator, 175 psi, fits 2″ insulation |
| Model 22 HP | 2″ – 12″ | 3225759 – 3225769 | Heavy‑duty body, 285 psi, insulation compatible |
Part number notes: Standard configuration is Buna‑N seat, manual lever or gear operator, ductile iron body, 410 nitrided stem. Prefix 32257XX for Model 22 (vs. 32298XX for Model 12). For special configurations: 316 stainless steel body add “SS” prefix (e.g., SS3225734), FKM seat add “V” suffix (e.g., 3225734V), electric actuator add “E” prefix (e.g., E3225734). For extended neck to fit 3″ insulation, add “L” suffix (e.g., 3225734L) – requires factory confirmation.
| Category | Standard Configuration | Optional Configuration |
|---|---|---|
| Pressure Rating | 175 psi (Class 150, cold working) | 285 psi (HP version), vacuum to 175 psi wide range |
| Body Material | Ductile iron (ASTM A536) | Carbon steel (A216 WCB), 304/316 stainless steel (A351), alloy |
| Disc Material | Nickel‑plated ductile iron | 316 stainless steel, Hastelloy C‑276, Titanium |
| Stem Material | 410 stainless steel (nitrided) | 17‑4 PH stainless steel, 316 stainless steel |
| Seat Material | Buna‑N (-20°F to 200°F / -29°C to 93°C) | EPDM (-40°F to 300°F), Viton (FKM, -20°F to 204°C), PTFE encapsulated, conductive PTFE |
| Connection | Wafer with flange positioning holes | – (no lug option – dedicated insulation design) |
| Operation | Manual lever (small sizes), gear operator (≥6″ standard) | Pneumatic actuator, electric actuator (automation ready) |
| Temperature Range | -20°F to 200°F (-29°C to 93°C) with Buna‑N | EPDM: -40°C to 149°C, FKM: -20°C to 204°C, PTFE: -40°C to 200°C |
| Design Standards | ANSI 150 / ASME B16.34, ASTM | ABS, DNV marine, fire‑safe (custom) |
| Structural Features | Long neck (≥2″ insulation clearance), patented hard‑backed seat, body positioning holes | Anti‑corrosion marine coating, double‑acting actuator, extended neck for 3″ insulation |
Long Neck for Insulated Pipelines – Extended valve neck provides clearance for ≥2″ insulation; no interference with handle or actuator.
Patented Hard‑Backed Resilient Seat – Bidirectional bubble‑tight zero leakage under high pressure.
Nitrided 410 Stainless Steel Stem – Anti‑galling, low operating torque, smooth actuation.
Self‑Centering Disc – Ensures consistent sealing alignment and long service life.
Wafer Connection with Positioning Holes – Accurate alignment on ASME Class 125/150 flanges.
High Pressure Capability – Model 22 HP rated to 285 psi for demanding insulated services.
Marine & Fire‑Safe Options – ABS/DNV approvals and API fire‑safe available.
Oil & Gas – insulated wellhead auxiliary lines, gathering systems with heat tracing
Petrochemical – insulated process pipelines, high temperature circulating water (with appropriate seat)
Power Generation – insulated steam condensate lines, boiler auxiliary insulation
Offshore Platforms – insulated topsides piping, firewater lines with freeze protection
Refineries – insulated hydrocarbon lines, sulfur plants
Industrial Facilities – any insulated pipeline requiring high pressure isolation
The FMC BV MOD 22 Series (Weco Model 22, 22 HP) is the premier choice for high pressure butterfly valves on insulated pipelines. Its long neck, patented seat, and robust construction ensure reliable, maintenance‑free performance in the most demanding thermal insulation applications.
| Feature | FMC BV MOD 22 (Model 22 Series) | FMC BV MOD 12 (Model 12 Series) |
|---|---|---|
| Core Positioning | Long neck insulated – dedicated for insulated lines | General purpose high pressure – shut‑off & throttling |
| Size Range | 2″ – 12″ (DN50‑DN300) | 2″ – 24″ (DN50‑DN600) |
| Connection | Wafer only (with positioning holes) | Wafer & lug |
| Construction | Extended neck (≥2″ insulation clearance) | Short neck, no insulation provision |
| Pressure Rating | 175 psi (HP to 285 psi) | 175 psi (HP to 285 psi) |
| Typical Applications | Insulated process lines, heat traced piping, high temp circulation | Non‑insulated general industrial, chemical, water |
| Part Number Prefix | 32257XX | 32298XX |
| Substitution | Preferred for insulation – cannot replace Model 12 | Preferred for non‑insulated – cannot replace Model 22 |
Contact us for quotes, stock availability, or technical support: info@hyrig.com
For accurate selection, please specify model (Model 22 or 22 HP), size, seat material (Buna‑N, EPDM, FKM, PTFE), and required insulation thickness (standard 2″ or custom 3″). For marine certifications, fire‑safe, or electric actuation, please inquire.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.