Mechanical Seal Model: G0006013
Single‑end · Single‑spring · Rotating · Unbalanced
| Parameter | Description |
|---|---|
| Type | Single‑end, single‑spring, rotating, unbalanced mechanical seal |
| Structure | Typical internal‑mounted, internal‑flow design (rotating ring, stationary ring, spring, auxiliary seal/O‑ring, set screw) |
| Standards | Compliant with ISO3069, DIN24960, and GB/T 6556 general industrial standards |
| Applicable Equipment | Horizontal single‑stage / multi‑stage centrifugal pumps (clean water pumps, chemical pumps, sewage pumps) |
| Parameter | Value |
|---|---|
| Pressure Rating | ≤ 1.0 MPa |
| Temperature Range | -20°C ~ +180°C |
| Linear Speed | ≤ 15 m/s |
| Shaft Diameter Range | Typically 25mm ~ 80mm (detailed dimensions subject to manufacturer’s specification sheet) |
| Applicable Media | Water, oil, weak acids, weak alkalis, salt solutions, and other clean or slightly particle‑containing media |
| Component | Material Options |
|---|---|
| Rotating Ring | Graphite / Silicon Carbide |
| Stationary Ring | Silicon Carbide / Alumina Ceramic |
| Auxiliary Seal (O‑ring) | NBR, FKM, or EPDM |
| Metal Components | 304 / 316L Stainless Steel |
Simple Structure – High versatility, easy installation and replacement
Anti‑clogging – Single‑spring design, not easily tangled or blocked by impurities
Cost‑Effective – Industrial standard component with excellent cost‑performance ratio
During installation, ensure the spring rotation direction is consistent with the pump shaft rotation direction.
For technical inquiries, quantity quotes, or custom material configurations tailored to oil drilling industry needs, email: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.