The Gardner Denver PAH (also known as PAH-275) is a 275 HP (205 kW) triplex single-acting piston pump with an 8-inch (203.2 mm) stroke and a rated pump speed of 175 SPM. The pump features a steel block fluid end, a 6-inch intake, a 3.5-inch discharge, and a 4-1/2 inch piston/liner configuration. It is widely used in oil and gas drilling, water well drilling, and geological exploration. Our Gardner Denver PAH mud pump parts and spares are manufactured to API 7K standards and are designed as direct replacements for OEM components.
Easy Wearing Parts for Gardner Denver PAH with OEM Part Numbers:
Liners and Liner Packing:
Liner 3 inch — Part No. MK-0189-30 (Small OD), MK-0193-30 (Large OD)
Liner 3.5 inch — Part No. MK-0189-34 (Small OD), MK-0193-34 (Large OD)
Liner 4 inch — Part No. MK-0189-40 (Small OD), MK-0193-40 (Large OD)
Liner 4.5 inch — Part No. MK-0189-44 (Small OD), MK-0193-44 (Large OD)
Liner 5 inch — Part No. MK-0193-50 (Large OD)
Liner Packing — Part No. MKG-0266
Gaskets:
Valve Cover Gasket — Part No. MKG-0799
Cylinder Head Gasket — Part No. MKG-0799 Series
Valve Assembly and Components (King — 4 Web):
Valve (Urethane Insert) — Part No. MK-U5B-13
Valve (Rubber Insert) — Part No. MK-5B-13
Valve Seat — Part No. MK-4DD-B1
Valve Spring — Part No. MK-5710-078
Valve Insert (Urethane) — Part No. MK-UDD-4B
Valve Insert (Rubber) — Part No. MK-DD-4B
Valve Seat Puller Head — Part No. MK-1700-4
Valve Assembly and Components (King — Full Open):
Valve (Urethane Insert) — Part No. MK-4FO-V1
Valve Seat — Part No. MK-4FO-S5
Valve Spring — Part No. MK-5710-33
Valve Insert (Urethane) — Part No. MK-4FO-SI
Valve Seat Puller Head — Part No. MK-1700-4FO
Valve Assembly and Components (King — 3 Web):
Valve (Urethane Insert) — Part No. MK-PJ482A
Valve Seat — Part No. MK-PJ451
Valve Spring — Part No. MK-5710-078
Valve Insert (Urethane) — Part No. MK-PJ452
Valve Seat Puller Head — Part No. MK-1700-4GD
Pistons:
Red Thunder Bonded Piston 4 inch — Part No. MK-RT-400
Red Thunder Bonded Piston 4.5 inch — Part No. MK-RT-440
Red Thunder Bonded Piston 5 inch — Part No. MK-RT-500
Imperial Piston 3 inch — Part No. MK-I30HK14/15
Imperial Piston 3.5 inch — Part No. MK-I34HK14/15
Imperial Piston 4 inch — Part No. MK-I40HK14/15
Imperial Piston 4.5 inch — Part No. MK-I44HK14/15
Imperial Piston 5 inch — Part No. MK-I50HB14/15
Imperial Rubber Kit 3 inch — Part No. MK-I30HK
Imperial Rubber Kit 3.5 inch — Part No. MK-I34HK
Imperial Rubber Kit 4 inch — Part No. MK-I40HK
Imperial Rubber Kit 4.5 inch — Part No. MK-I44HK
Imperial Rubber Kit 5 inch — Part No. MK-I50HB
Rubber Bonded Piston 4 inch — Part No. MK-RB-400
Rubber Bonded Piston 4.5 inch — Part No. MK-RB-440
Rubber Bonded Piston 5 inch — Part No. MK-RB-500
Long Life (Urethane) Piston 4 inch — Part No. MK-LL-400
Long Life (Urethane) Piston 4.5 inch — Part No. MK-LL-440
Long Life (Urethane) Piston 5 inch — Part No. MK-LL-500
Rods and Related:
Piston Rod — Part No. MK-0193
Extension Rod — Part No. MK-16-0192
Rod Clamp — Part No. MK-24-0191
Piston Rod Nut (Clamp Type) — Part No. MK-7403364
Fluid End Modules and Accessories:
Fluid Module, Studded — Part No. 205PJH029B (Qty 3)
Fluid Module, Only — Part No. A-200PJH029B
Stud, Frame Liner Clamp — Part No. A-79AJ2
Nut, Frame Liner Clamp — Part No. A-50B35
Stud, Discharge Manifold — Part No. A-79L142
Threaded Cap — Part No. A-200PJH147
Cover, Valve — Part No. A-200PJH715
Gasket, Valve Cover — Part No. A-25G18
Materials and Construction:
Each Gardner Denver PAH part is made from materials selected for demanding oilfield service. Fluid end modules use high-strength alloy forged steel. Liners use forged steel outer sleeves and high-chromium cast iron inner sleeves. Pistons use high-strength steel cores with urethane, rubber, or replaceable cup designs. Valve bodies and seats use forged alloy steel with advanced heat treatment. Seals use NBR or HNBR rubber. All parts are precision machined to ensure proper fit and reliable performance.
Key Performance Advantages:
Our Gardner Denver PAH mud pump parts and spares offer high wear resistance, reliable sealing, and long service life. They are compatible with water-based, oil-based, and synthetic drilling fluids.
Applications:
These parts are suitable for oil and gas drilling, water well drilling, geological exploration, and grouting operations.
Compatibility:
All listed parts are direct replacements for Gardner Denver PAH (All Models) mud pump components. No modification is required for installation.
Order Information:
MOQ: 5 pieces or sets, depending on the part. Custom materials, colors, and branding available. Standard export packaging. Delivery from stock or short lead time. For pricing, technical data sheets, or OEM inquiries, please contact us at info@hyrig.com.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.