Gardner Denver PZ-10 & PZ-11 Mud Pump Parts and Spares — Easy Wearing Parts

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
API 7K Gardner Denver PZ-10 and PZ-11 mud pump parts and spares. Easy wearing parts include liners 4 inch to 7.5 inch, pistons, piston rubbers, valve assemblies, valve seats, valve springs, fluid end modules, seals, and piston rods. PZ-10: 1,350 HP, 10-inch stroke. PZ-11: 1,600 HP, 11-inch stroke, up to 7,500 PSI. Both models share numerous fluid end components. OEM part numbers available. Contact info@hyrig.com.

Conatct For Details
DetailReview(0)Additional

The Gardner Denver PZ-10 and PZ-11 are triplex single-acting piston pumps designed for continuous high-pressure drilling operations in deep well and ultra-deep well applications. The PZ-10 (also known as PZK) is rated at 1,350 HP with a 10-inch (254 mm) stroke, a maximum speed of 115 SPM, a maximum piston load of 139,500 lbs, and a gear ratio of 4.38:1. The PZ-11 (also known as PZL) is rated at 1,600 HP with an 11-inch (279.4 mm) stroke, a maximum speed of 115 SPM, and a fluid end rating of up to 7,500 PSI. Both models feature nodular iron power frames, full roller bearing construction, double helical main gears, replaceable bronze crosshead slides, and a comprehensive forced and splash lubrication system. The PZ-10 and PZ-11 share numerous fluid end components, simplifying inventory management and reducing spare parts costs. Our Gardner Denver PZ-10 and PZ-11 mud pump parts and spares are manufactured to API 7K standards and are designed as direct replacements for OEM components.

Easy Wearing Parts for Gardner Denver PZ-10 & PZ-11 with OEM Part Numbers:

Fluid End Modules:

Fluid Module, Studded (Included Items 2–8) — Part No. A-202PZL029B (Qty 3)

Fluid Module, Only — Part No. A-201PZL110 (Qty 3)

Stud – Frame, Liner Clamp — Part No. A-205PZL110 (Qty 24)

Nut – Frame, Liner Clamp — Part No. A-50B36 (Qty 24)

Stud – Threaded Ring — Part No. A-204PZL110 (Qty 60)

Nut – Threaded Ring, Discharge Manifold — Part No. A-50B34 (Qty 72)

Stud – Discharge Manifold — Part No. A-202PZL110 (Qty 84)

Cap – Valve Lock — Part No. A-200PZL587 (Qty 12)

Cover – Valve — Part No. A-200PZL147 (Qty 6)

Valve Guide Bushing – Discharge — Part No. A-2007674 (Qty 6)

Gasket – Valve Cover — Part No. A-204PZL715 (Qty 3)

Threaded Ring — Part No. A-200PZL387 (Qty 6)

Valve Guide Assembly (Included Items 14–18) — Part No. A-200PZL483A (Qty 6)

Retainer Plate — Part No. A-2011701 (Qty 3)

Valve Guide – Suction — Part No. A-200PZL483 (Qty 3)

Valve Guide Bushing – Suction — Part No. A-2007674 (Qty 3)

Lock Washer – Valve Guide / Suction — Part No. A-95W2 (Qty 3)

Bolt – Valve Guide / Suction — Part No. A-655EE06S (Qty 3)

Gasket – Discharge Manifold — Part No. A-25AL35 (Qty 3)

Gasket – Suction Manifold — Part No. A-25BE41 (Qty 3)

Liner Clamp — Part No. A-200PZL455 (Qty 3)

Cylinder Liners:

Liner 7 inch — Part No. 200PZL456

Liner 6.5 inch — Part No. 201PZL456

Liner 6 inch — Part No. 202PZL456

Liner 5.5 inch — Part No. 203PZL456

O-Ring for all liner sizes — Part No. 25AH1

Liner Clamp — Part No. 200PZL455

Liner Gasket to Cylinder — Part No. 25AT37

High Pressure Cylinder Liners (PZ-11 7500 PSI):

Liner 6.5 inch — Part No. 300PZL4055

Liner 6 inch — Part No. 301PZL4055

Liner 5.5 inch — Part No. 302PZL4055

Liner 5 inch — Part No. 303PZL4055

Liner End Seal 6.5 inch — Part No. 301PZL316

Liner End Seal 6 inch — Part No. 303PZL316

Pistons and Rubber:

Piston Assembly 7 inch — Part No. 202TBL045A

Piston Assembly 6.5 inch — Part No. 201TBL045A

Piston Assembly 6 inch — Part No. 245TBB045A

Piston Assembly 5.5 inch — Part No. 243TBB045A

Valve Assembly and Components:

Valve Seat, 4-Rib — Part No. 200PZL039 (MK 61101507 or MK-7DD-B1)

Valve Assembly, 4-Rib — Part No. 200PZL482A (MK 60155041 or MK-U5C-EEF)

Valve Spring — Part No. 78H44

Valve Insert (Polyurethane) — Part No. 201PZL106

Valve Fluid — Part No. 202PZL482

Valve Seat — Part No. 202PZL039

Valve Washer — Part No. 201PZL279

Fluid End Modules and Accessories (L-Shaped):

Complete Fluid End Assembly — Part No. 8477-A or A-8477-A

Discharge Module, Studded (Items 1–6) — Part No. 8477-1 or A-8477-1

Suction Module, Studded (Items 6–7) — Part No. 8477-2 or A-8477-2

Valve Cover — Part No. 4475 or A-4475

Valve Cover Plug Assembly — Part No. 4675-1A or A-4675-1A

Valve Guide Stud with Nut — Part No. 4017-5 or A-4017-5

Valve Guide Insert — Part No. 4018-34 or A-4018-34

Liner Retainer Flange — Part No. 4700-I or A-4700-I

Wear Plate — Part No. 8488-5 or A-8488-5

Wear Plate Seal — Part No. 2930-08 or A-2930-08

Suction Module Dowel Pin — Part No. 2988 or A-2988

Discharge Manifold Seal — Part No. 25AL35 or A-25AL35

Threaded Flange — Part No. 4575 or A-4575

Screw Gland — Part No. 4675-1 or A-4675-1

7500 PSI Fluid End Components (PZ-11 PZL99D Configuration):

Complete Fluid End Assembly (7500 PSI) — Part No. 8477-25A or A-8477-25A

Discharge Module, Studded (7500 PSI, Items 1–6) — Part No. 8477-27 or A-8477-27

Suction Module, Studded (7500 PSI, Items 6–7) — Part No. 8477-26 or A-8477-26

Valve Cover (7500 PSI) — Part No. 4588-25 or A-4588-25

Valve Cover Flange — Part No. 4488-25 or A-4488-25

Valve Cover Plug Assembly — Part No. 4688-25A or A-4688-25A

Valve Cover Plug — Part No. 4688-25 or A-4688-25

Liner Wear Plate — Part No. 6577-25 or A-6577-25

Liner Retainer — Part No. 4788-25R or A-4788-25R

Alignment Ring — Part No. 4018-18 or A-4018-18

Rods and Related:

Piston Rod, General Service — Part No. 200PZJ4065

Piston Rod, High Pressure Service — Part No. 300PZL4065

Piston Rod — Part No. 301PZL060 or 302PZL060

Piston Rod Stud — Part No. 300PZL110

Slide Crosshead — Part No. 200PZL309

Frame and Miscellaneous:

Frame Assembly — Part No. 200PZL001A

Crosshead Slide — Part No. 200PZL309 (Qty 6 per pump)

Crosshead Inspection Plate — Part No. 200PZK052

Jackshaft — Part No. 200PZK371

Jackshaft Key — Part No. 200PZL062

Bearing Housing, Eccentric — Part No. 201PZL006

Bearing Cover Plate, Rigid Side — Part No. 200PZL315

Bearing Cover Plate, Floating Side — Part No. 201PZL315

Materials and Construction:

Each Gardner Denver PZ-10 and PZ-11 part is made from materials selected for demanding high-pressure drilling service. The power end frame, eccentric shaft, and connecting rods use high-strength nodular iron whole casting. The fluid end modules are forged from high-quality alloy steel (35CrMo, 40CrMnMo, or 4135) and heat treated for superior strength and durability. Liners use forged steel outer sleeves and high-chromium cast iron inner sleeves, or ceramic for extended life. The PZ-11 7500 PSI fluid end uses heat-treated 8630 forged steel. Pistons use high-strength steel cores with HNBR or polyurethane cups. Valve bodies and seats use forged alloy steel with advanced heat treatment. The main gear is forged from high-quality alloy steel with double helical teeth. The power end adopts a full roller bearing structure. Crosshead slides use replaceable bronze. Seals use NBR or HNBR rubber. All parts are precision machined to ensure proper fit and reliable performance.

Key Performance Advantages:

Our Gardner Denver PZ-10 and PZ-11 mud pump parts and spares offer high wear resistance, reliable sealing, and long service life. The PZ-10 and PZ-11 share numerous fluid end components, simplifying inventory management and reducing spare parts costs. The modular fluid end design enables individual cylinder module replacement without disturbing adjacent cylinders, reducing downtime and maintenance costs. The PZ-11 with 7500 PSI fluid end provides maximum working pressure for extreme-pressure drilling conditions. Parts are compatible with water-based, oil-based, and synthetic drilling fluids.

Applications:

These parts are suitable for deep well drilling, ultra-deep well drilling, high-pressure drilling, land and offshore rigs, well service, and workover operations.

Compatibility:

All listed parts are direct replacements for Gardner Denver PZ-10 and PZ-11 mud pump components. The PZ-10 and PZ-11 share valve assemblies (200PZL039, 200PZL482A) and numerous fluid end components. No modification is required for installation.

Order Information:

MOQ: 5 pieces or sets, depending on the part. Custom materials, colors, and branding available. Standard export packaging. Delivery from stock or short lead time. For pricing, technical data sheets, or OEM inquiries, please contact us at info@hyrig.com.


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit