Gardner Denver PZ-8 and PZ-9 Mud Pump Parts and Spares — Easy Wearing Parts

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
API 7K Gardner Denver PZ-8 and PZ-9 mud pump parts and spares. Easy wearing parts include liners 5 inch to 7 inch, pistons, piston rubbers, valve assemblies, valve seats, valve springs, fluid end modules, seals, and piston rods. 750 HP, 8 inch stroke, 140 SPM. OEM part numbers available. Contact info@hyrig.com.

Conatct For Details
DetailReview(0)Additional

The Gardner Denver PZ-8 and PZ-9 are 750 HP triplex single-acting piston pumps with an 8-inch (203.2 mm) stroke and a rated speed of 140 SPM. The pumps share a common fluid end design and are widely used in oil and gas drilling, water well drilling, and geological exploration. Our Gardner Denver PZ-8 and PZ-9 mud pump parts and spares are manufactured to API 7K standards and are designed as direct replacements for OEM components.

Easy Wearing Parts for Gardner Denver PZ-8 and PZ-9 with OEM Part Numbers:

Fluid End Modules:

Fluid Module, Studded (Includes Items 2 to 9) — Part No. A-205PZL029D (Qty 3)

Fluid Module, Only — Part No. A-79L188 (Qty 3)

Stud, Frame Liner Clamp — Part No. A-50B36 (Qty 24)

Nut, Frame Liner Clamp — Part No. A-79L73 (Qty 48)

Stud, Frame — Part No. A-50AQ30 (Qty 12)

Nut, Frame — Part No. A-79AL6 (Qty 12)

Stud, Threaded Ring — Part No. A-50B34 (Qty 48)

Nut, Threaded Ring, Discharge Manifold — Part No. A-202PZL110 (Qty 60)

Stud, Discharge Manifold — Part No. A-2011857 (Qty 12)

Cap, Valve Lock — Part No. A-2011699 (Qty 6)

Threaded Ring — Part No. A-2011860 (Qty 6)

Cover, Valve — Part No. A-2007674 (Qty 6)

Valve Guide Bushing — Part No. A-2011862 (Qty 3)

Gasket, Valve Cover — Part No. A-2011861 (Qty 6)

Ring, Retaining / Valve Cover Gasket — Part No. A-2011706 (Qty 6)

Valve Guide Assembly (Includes Items 16 to 20) — Part No. A-2011701 (Qty 3)

Retainer Plate — Part No. A-2011700 (Qty 3)

Valve Guide, Suction — Part No. A-2007674 (Qty 3)

Valve Guide Bushing, Suction — Part No. A-95W2 (Qty 3)

Lock Washer, Valve Guide / Suction — Part No. A-655EE06S (Qty 3)

Bolt, Valve Guide / Suction — Part No. A-25AL35 (Qty 3)

Gasket, Discharge Manifold — Part No. A-25G41 (Qty 3)

Gasket, Suction Manifold — Part No. A-1PV14 (Qty 3)

Liner Clamp — Part No. A-200PZL455 (Qty 3)

Liners:

Liner 5 inch — Part No. MK-1191-50

Liner 5.5 inch — Part No. MK-1191-54

Liner 6 inch — Part No. MK-1191-60

Liner 6.25 inch — Part No. MK-1191-62

Liner 6.5 inch — Part No. MK-1191-64

Liner 6.75 inch — Part No. MK-1191-66

Liner 7 inch — Part No. MK-1191-70

Valve Cap Gasket / Cylinder Head Gasket — Part No. MK-2011862 or MKG-0749

Seal Liner — Part No. MK-61-0179 or MKG-0692

Valve Assembly and Components:

Valve Assembly API #7 Red Thunder High Temp — Part No. MK-U5C-EEF HT

Valve Insert Urethane API #7 High Temp — Part No. MK-UDD-7B HT

Seat Puller Head API #7 Prong 4 — Part No. MK-1700-7

Seat Puller Head API #7 Full Open Type — Part No. MK-1700-7FO

Valve Assembly API #7 (Urethane Insert) — Part No. MK-U5C-EEF

Piston Assembly High Temp Urethane Bonded 6 inch — Part No. MK-RT-600

Piston Assembly High Temp Urethane Bonded 6.5 inch — Part No. MK-RT-640

Piston Assembly High Temp Urethane Bonded 7 inch — Part No. MK-RT-700

Rods and Related:

Piston Rod, Clamp Type — Part No. MK-0191

Extension Rod, Clamp Type (PZ-9) — Part No. MK-16-0191

Rod Clamp — Part No. MK-24-0191

Piston Rod Nut, Clamp Type — Part No. MK-7403364

Frame and Miscellaneous:

Liner of Crosshead Upper — Part No. 2012509 (PZ-8), PZ222 (PZ-9)

Materials and Construction:

Each Gardner Denver PZ-8 and PZ-9 part is made from materials selected for demanding oilfield service. Fluid end modules use high-strength alloy forged steel. Liners use forged steel outer sleeves and high-chromium cast iron inner sleeves, or ceramic for extended life. Pistons use high-strength steel cores with urethane, rubber, or replaceable cup designs. Valve bodies and seats use forged alloy steel with advanced heat treatment. Seals use NBR or HNBR rubber. All parts are precision machined to ensure proper fit and reliable performance.

Key Performance Advantages:

Our Gardner Denver PZ-8 and PZ-9 mud pump parts and spares offer high wear resistance, reliable sealing, and long service life. The PZ-8 and PZ-9 share numerous fluid end components, simplifying inventory management and reducing spare parts costs. Parts are compatible with water-based, oil-based, and synthetic drilling fluids.

Applications:

These parts are suitable for oil and gas drilling, water well drilling, geological exploration, and grouting operations.

Compatibility:

All listed parts are direct replacements for Gardner Denver PZ-8 and PZ-9 mud pump components. No modification is required for installation.

Order Information:

MOQ: 5 pieces or sets, depending on the part. Custom materials, colors, and branding available. Standard export packaging. Delivery from stock or short lead time. For pricing, technical data sheets, or OEM inquiries, please contact us at info@hyrig.com.


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit