Product Name: Gland, Packing Half (Split Packing Gland)
Part Numbers: 24034-01-13 | 654315100
This heavy‑duty half‑section packing gland (split gland, two‑piece gland) is designed for Mission Magnum XP series pumps (M.S.24036 / 658416102) and is 100% interchangeable with Sandman MCM XL and TSC PF pump packing glands. The gland is supplied in two halves that bolt together around the shaft sleeve. This split design allows installation or replacement without removing the shaft, coupling, or impeller – a major advantage during maintenance. When the gland bolts (e.g., 3861‑165) are tightened, the gland compresses the packing rings axially inside the stuffing box, forcing them radially against the shaft sleeve to create a leak‑tight seal.
Key Specifications
Type: Split (two halves)
Material: High‑strength ductile iron (or equivalent cast iron), stress‑relieved
Design: Precision machined mating faces, bolt holes for assembly
Function: Compresses packing rings to prevent fluid leakage along shaft
Compatible with MECH. SEAL assemblies (24036 / 658416102)
Fits pump sizes: 8x6, 12x10, 14x12 (Mission Magnum XP series)
Material & Durability
Cast from ductile iron, the packing gland resists deformation and fatigue under repeated tightening. Precision‑machined halves ensure even load distribution across the packing set. The split design eliminates the need for complete pump disassembly during packing replacement.
Interchangeability
Direct replacement for Mission Magnum XP split packing glands (MECH. SEAL 24036 / 658416102)
Also fits Sandman MCM XL and TSC PF stuffing boxes without modification
Same outer diameter, inner bore, thickness, bolt hole pattern, and split line geometry as OEM
Performance & Applications
The half‑gland is essential for maintaining a reliable packed seal. Typical applications include:
Oil & gas hydraulic fracturing (frac pumps)
Mine dewatering and slurry transfer
Mineral processing pumps
Wastewater treatment pump maintenance
Why choose this packing gland?
OEM fit for Mission Magnum XP / Sandman MCM XL / TSC PF (MECH. SEAL 24036 / 658416102)
Part numbers: 24034-01-13, 654315100
Split design for fast, easy installation
Ductile iron construction for long life
Prevents shaft leakage and reduces downtime
For technical drawings, dimensional specs, or bulk orders:
info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.