HH2400 Mud Pump Unit | 2,400 HP AC VFD Direct Drive
Overview:
HYRIG can supply the HH2400 mud pump unit and its spare parts. The HH2400 is a high-power triplex single-acting piston mud pump featuring a 2,400 HP AC VF motor direct drive, a maximum stroke rate of 152 SPM, and a maximum discharge pressure of 7,500 psi.
| Dimension Item | Specification |
|---|---|
| Overall Dimension (L x W x H) | 5,588 x 3,187 x 2,890 mm |
| Footprint | Approx. 18.3 x 10.4 x 9.5 ft |
The HH2400 mud pump unit utilizes AC VFD motor direct drive technology. Reciprocating and rotational inertia forces are zero, meaning additional loads on the roller bearings and friction pairs are minimal. The unique lubrication system effectively removes heat generated by the friction pairs, ensuring a long service life.
When replacing a mud pump unit, verify the suction and discharge flange connections and the electrical power supply requirement for the AC VF motor. Ensure the structural footprint matches the rig's skid layout.
Not sure if the HH2400 is compatible with your rig's electrical system? Tell us your required flow rate, pressure, and available VFD power. For smaller operations, explore the HH1600 Mud Pump Unit.
Suitable for deep drilling operations in oil and gas fields. Designed for circulating drilling fluid (mud) under high pressure.
Disclaimer: This equipment is designed for hazardous environments. Ensure strict compliance with local safety standards and verify certification documents prior to operation.
HYRIG provides a full range of replacement parts for the HH2400 mud pump, including pistons, liners, valves, seats, and fluid end modules. Please see our Mud Pump Series page.
Specifications:
FAQ:
Contact Us:
For HH2400 mud pump unit selection and spare parts, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.