The HYRIG High Pressure Liquid Hydrogen Reciprocating Pump is a specialized cryogenic plunger pump engineered for the safe and efficient pressurization of liquid hydrogen (LH₂) to ultra-high pressures. Designed for cryogenic service at temperatures as low as -253°C, this horizontal positive displacement pump is the preferred solution for hydrogen refueling stations (HRS), fuel cell vehicle (FCV) refueling, and high-pressure tube trailer filling.
Liquid hydrogen pumping is significantly more energy-efficient than gaseous hydrogen compression, with rapid refueling performance and low energy consumption. HYRIG's pump features robust construction, advanced sealing technology, and vacuum-jacketed cold end design to ensure reliable, long-term operation in the most demanding hydrogen infrastructure environments.
Ultra-High Pressure Capability – The pump delivers discharge pressures up to 120 MPa (1,200 bar), making it suitable for H35 (35 MPa) and H70 (70 MPa) hydrogen refueling stations. Flow rates reach up to 7+ m³/h, with some heavy-duty configurations achieving up to 285 kg/h.
Cryogenic Temperature Operation – Engineered for liquid hydrogen service at -253°C (-423°F). The vacuum-jacketed cold end minimizes heat ingress, reduces cold loss, and ensures stable cryogenic performance.
Reciprocating Plunger Design – The pump utilizes a reciprocating plunger mechanism with components including a cold-end cylinder assembly (piston, piston rings, cylinder, suction and discharge valves), warm-end drive, and cold- and warm-end connection. The heavy-duty drive end meets various high-pressure conditions.
Long-Life Sealing System – Piston rings and sealing rings are manufactured from wear-resistant polymer composite materials with extended service life, ensuring reliable operation under alternating pressure, temperature, and flowrate conditions.
ISO/AWI 19880-11 Compliance – Designed and manufactured to comply with ISO/AWI 19880-11, the international standard for high pressure liquid hydrogen pumps used in hydrogen refueling stations.
Superior Cavitation Resistance – Optimized hydraulic design and advanced inlet subcooling technology prevent cavitation, ensuring high volumetric efficiency and preventing structural damage.
Skid-Mounted Configuration – Each unit is installed on a single, rigid skid with variable speed motor drive, enabling compact, space-efficient installation.
Fluid Handled: Liquid Hydrogen (LH₂)
Temperature Range: Down to -253°C (-423°F)
Maximum Discharge Pressure: Up to 120 MPa (1,200 bar)
Flow Rate: Up to 7+ m³/h (285+ kg/h)
Configuration: Reciprocating plunger, horizontal, positive displacement
Components: Cold-end cylinder assembly, warm-end drive, cold- and warm-end connection
Drive Type: Electric motor, VFD compatible
Standards: ISO/AWI 19880-11 compliant
Hydrogen Refueling Stations (H35/H70) – Pressurizing LH₂ from storage to high-pressure dispensers for fuel cell vehicle refueling
Fuel Cell Vehicle Refueling – High-pressure LH₂ filling for passenger cars, buses, and trucks
Tube Trailer Filling – High-pressure filling of hydrogen transport trailers and cascades
Cryo-Compressed Hydrogen Systems – High-pressure hydrogen production for storage and transport
Aerospace Applications – Liquid hydrogen transfer for rocket propulsion systems
Industrial Gas Transfer – High-pressure hydrogen supply for industrial processes
Superior Energy Efficiency – Liquid-phase pumping delivers rapid refueling performance with low energy consumption. Electricity consumption is approximately 1.4 kWh/kg H₂.
Exceptional Reliability – Extended durability tests have verified stable operation at 700 bar, completing 456 consecutive refueling cycles over 19 days without measurable performance degradation. Real-world validation confirms average refueling rates above 3.3 kg/min.
High Flow Performance – Capable of dependable high flow rates up to 285 kg/h, enabling rapid refueling of fuel cell vehicles and tube trailers.
Low Maintenance – The robust design, long-life seals, and vacuum-jacketed cold end reduce maintenance frequency and operational downtime. Routine maintenance can be completed efficiently.
Application Flexibility – Available in configurations to meet diverse flow and pressure requirements for hydrogen refueling stations of various sizes.
Proven Technology – Backed by decades of cryogenic and high-pressure engineering expertise, with successful application in hydrogen refueling stations for nearly 30 years.
Every HYRIG High Pressure Liquid Hydrogen Reciprocating Pump is manufactured under stringent quality management systems and complies with:
ISO/AWI 19880-11 – Gaseous hydrogen — Fuelling stations — Part 11: High pressure Liquid Hydrogen Pumps
Explosion-Proof Certification – All electrical components comply with hazardous area requirements
Global Export Compliance – Exported to hydrogen infrastructure projects worldwide
For detailed technical data sheets, customized quotations, or to discuss your specific high pressure liquid hydrogen reciprocating pump requirements, please contact our engineering team at:
info@hyrig.com
Our cryogenic and hydrogen specialists are ready to provide professional consultation and tailored support for your project needs.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.