The HYRIG High Pressure Liquid Oxygen Reciprocating Pump is a specialized cryogenic plunger pump engineered for the safe and efficient pressurization of liquid oxygen (LO₂) to ultra-high pressures. Designed for cryogenic service at temperatures as low as -196°C, this horizontal positive displacement pump is the preferred solution for high-pressure cylinder filling, industrial gas transfer, air separation unit (ASU) supply, and gas packaging applications.
Liquid oxygen is a strongly oxidizing cryogenic fluid that requires special handling considerations. HYRIG's pump features oxygen-compatible materials, strict cleanliness protocols, and robust construction to ensure safe, reliable operation in the most demanding industrial environments.
Ultra-High Pressure Capability – The pump delivers discharge pressures up to 690 bar (10,000 psi), with typical configurations offering 150–350 bar (2,175–5,075 psi) for cylinder filling and industrial gas applications. Flow rates range from 1,500 L/h to 60,000 L/h.
Oxygen-Compatible Materials – All wetted components are constructed from materials specially selected for oxygen service, including stainless steel 316 and high-nickel alloys. Cold end materials are suitable for pumping oxidizing gases such as liquid oxygen. Strict cleanliness protocols ensure safe operation in oxygen-enriched environments.
Vacuum-Jacketed Cold End – The pump head features a high-vacuum jacketed design that minimizes heat ingress and reduces cold loss. This ensures stable cryogenic performance, minimizes liquid oxygen boil-off, and reduces pre-cooling time.
Long-Life Sealing System – Piston rings and sealing rings are manufactured from wear-resistant polymer composite materials (special PTFE) with extended service life. Seals are designed for up to 4,000 hours of operation. The piston rod and cylinder sleeve surfaces are processed by special techniques to improve surface hardness by 20%, increasing seal service life.
Stable, Pulse-Minimized Output – Engineered to deliver small outlet pressure pulses with stable motor load, ensuring smooth operation and consistent high-pressure delivery.
Self-Lubricating Transmission – The transmission box features an internal splash lubrication system with oil temperature online alarm device for safe, reliable operation. The cold end is oil-free, preventing contamination of the oxygen.
Safety Systems – Equipped with a leak detection device at the cold end to ensure safety and reliability. Explosion-proof electrical components comply with hazardous area requirements.
Quick Startup – Rapid pre-cooling capability enables startup in approximately 5 to 10 minutes.
Skid-Mounted Configuration – Each unit is installed on a single, rigid skid with variable speed motor drive, enabling compact, space-efficient installation.
Fluid Handled: Liquid Oxygen (LO₂), also suitable for LN₂, LAr, LCO₂
Temperature Range: Down to -196°C
Maximum Discharge Pressure: Up to 690 bar (10,000 psi)
Flow Rate: 1,500 – 60,000 L/h (customizable)
Cylinder Configuration: Single-row, double-row, or three-row
Piston Diameter / Stroke: 50 / 35 mm (customizable)
Suction Pressure: 0.02 – 1.2 MPa
Materials (Wetted): SS316, High-Nickel Alloy
Drive Type: Electric motor, VFD compatible
Certifications: JB/T 9076, GB/T 9234, Explosion-Proof
LO₂ Cylinder Filling – High-pressure filling of oxygen cylinders, tube trailers, and cascades
Air Separation Units (ASU) – Pressurization and transfer of liquid oxygen products
Industrial Gas Packaging – High-pressure LO₂ transfer for gas packaging plants
Steel Mills – Oxygen supply for basic oxygen furnaces (BOF) and electric arc furnaces (EAF)
Chemical Processing – High-pressure oxygen feed for oxidation reactions
Cryogenic Testing Labs – Precise flow of cryogenic liquids at controlled pressures
Medical Gas Systems – High-pressure oxygen filling for medical applications
Superior Safety – Oxygen-compatible materials, leak detection devices, and explosion-proof electrical components ensure safe handling of LO₂ in hazardous environments.
High Efficiency – The reciprocating plunger design delivers efficient high-pressure conversion with minimal energy loss. Variable speed motor drive enables precise flow control and energy optimization.
Low Maintenance – Long-life piston seals (up to 4,000 hours) and internal splash lubrication reduce maintenance frequency and operational costs. Regular maintenance can be completed in as little as two hours.
Application Flexibility – Available in single-row, double-row, or three-row configurations with customizable flow rates and pressure ratings to meet diverse application requirements.
Compact Footprint – Skid-mounted design with vertical motor orientation minimizes installation space requirements.
Proven Durability – Backed by decades of cryogenic and high-pressure engineering expertise, the pump is designed for demanding continuous and intermittent operation.
Every HYRIG High Pressure Liquid Oxygen Reciprocating Pump is manufactured under stringent quality management systems and complies with:
JB/T 9076 – Specifications for Reciprocating Cryogenic Liquid Pumps
GB/T 9234 – Power Reciprocating Pumps
Explosion-Proof Certification – All electrical components comply with hazardous area requirements
Oxygen Service Compliance – Materials and cleaning protocols certified for oxygen service
Global Export Compliance – Exported to markets worldwide
For detailed technical data sheets, customized quotations, or to discuss your specific high pressure liquid oxygen reciprocating pump requirements, please contact our engineering team at:
info@hyrig.com
Our cryogenic specialists are ready to provide professional consultation and tailored support for your project needs.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.