HYRIG offers a complete range of OEM-quality spare parts for HONGHUA HHF-1600 mud pumps. Our inventory includes fluid end expendables (liners, pistons, valves and seats, piston rods), power end components (crankshaft assembly, crosshead assembly, pinion shaft assembly), pulsation dampeners, relief valves, and all sealing elements. Manufactured to API-7K with 100 percent OEM interchangeability. Custom orders welcome.
6. Full Product Introduction (SEO-optimised, with wear part names and part numbers)
HONGHUA HHF-1600 Mud Pump Spare Parts – OEM Quality, API-7K Certified
HYRIG is a professional supplier of high-quality replacement parts for the HONGHUA HHF-1600 triplex mud pump, a widely used drilling pump for middle and deep depth well drilling. The HHF-1600 is a horizontal, triplex, single-acting piston pump designed and manufactured according to API 7K standards. All our components are precision-engineered and 100 percent interchangeable with original OEM parts. Each pump has a serial number; customers need to specify the model and serial number when ordering spare parts.
Fluid End Components (GH3161 series):
Seal ring, cylinder head – Part No. GH3161-05.08
Rubber, valve – Part No. GH3161-05.11.03
Seal ring, valve pot cover – Part No. GH3161-05.12
Seal ring, liner – Part No. GH3161-05.14
Rubber, 6-1/2 inch – Part No. GH3161-05.24.01.02.00
Seal ring, piston – Part No. GH3161-05.31
Rubber cell (suction dampener) – Part No. GH3161-05.33.01
Cylinder head – Part No. GH3161-05.03
Valve rod guide (lower) – Part No. GH3161-05.05.00
Valve spring – Part No. GH3161-05.10
Full open valve assembly – Part No. GH3161-05.11.00
Suction dampener – Part No. GH3161-05.33.00
Liners (Bi-metal and Ceramic Options):
Bi-metal liners are available in various bore sizes. Outer sleeve constructed of high-quality 45# carbon steel; inner sleeve made of high-chromium cast iron with chromium content of 25 percent to 28 percent, heat-treated to achieve HRC60+ hardness for superior wear and corrosion resistance. Zirconia ceramic liners also available for extended service life.
Pistons:
Piston assemblies available in multiple sizes including 6-1/2 inch and 6-3/4 inch for HHF-1600 series.
Crankshaft Assembly Parts (HHF-1300/1600 series):
Cover, main bearing – Part No. 11-3161-0201-00, Qty 2
Sleeve, main bearing (right) – Part No. 11-3161-0202, Qty 1
Gasket – Part No. 11-3161-0203, Qty 2
Insider retainer – Part No. 11-3161-0204, Qty 2
Outside retainer – Part No. 11-3161-0205-00, Qty 3
Eccentric strap – Part No. 11-3161-0206, Qty 3
Positioning ring (I) – Part No. 11-3161-0207, Qty 1
Crankshaft – Part No. 11-3161-0208-00, Qty 1
Positioning ring (II) – Part No. 11-3161-0209, Qty 1
Bull gear – Part No. 11-3161-0210, Qty 1
Bolt, 1 1/2-8UN-2A170 – Part No. 11-3161-0211-2, Qty 12
Spacer ring – Part No. 11-3161-0212, Qty 2
Sleeve, main bearing (left) – Part No. 11-3161-0213, Qty 1
Retainer ring – Part No. 11-3161-0214, Qty 2
Baffle – Part No. 11-3161-0215, Qty 2
Bolt, main bearing, 3-8UN-3A – Part No. 11-3161-0216, Qty 4
Shims – Part No. 11-3161-0217, As required
Screw, 5/8-11UNC-2A120 – Part No. 11-3161-0218, Qty 2
Locking nut, 1 1/2-8UN-2B – Part No. 11-3161-0219-00, Qty 12
Bolt, 5/8-11UNC-2A40 – Part No. 11-3161-0220, Qty 70
Bolt, 5/8-11UNC-2A50 – Part No. 11-3161-0227, Qty 28
Bearing, eccentric strap, 929/660.4QU – Part No. 11-3161-0221-2, Qty 3
Main bearing, 3G3003760HY – Part No. 11-3161-0222-2, Qty 2
Locking wire, SZ-1.50 – Part No. 11-3161-0224, 40m
Locking wire, SZ-3.00 – Part No. 11-3161-0225, 3m
Sealant – Part No. 11-3161-0226, 90ml
Pulsation Dampener Parts (KB-75 Dampener Assembly):
Ring gasket, R39 – Part No. 11-3161-2701, Qty 1
Plug – Part No. 11-3161-2702, Qty 1
Diaphragm (bladder) – Part No. 11-3161-2703-00, Qty 1
Dampener body – Part No. 11-3161-2704-00, Qty 1
Cover – Part No. 11-3161-2705, Qty 1
Tee, NPT1/4 – Part No. 11-3161-2706, Qty 1
Joint, NPT1/4 – Part No. 11-3161-2707, Qty 1
Guard, pressure gauge – Part No. 11-3161-2708-00, Qty 1
Bleeder valve – Part No. 11-3161-2709-00, Qty 1
Pressure gauge, 0~25MPa (0~3630PSi) – Part No. 11-3161-2710-01, Qty 1
Check valve – Part No. 11-3161-2710-02, Qty 1
Stud bolt, 1 1/2-8UN(12UNF)-2A120 – Part No. 11-3161-2704-02, Qty 12
Nut, 1 1/2-8UN-2B (SPL) – Part No. 11-3161-2704-03, Qty 12
Stud bolt, 1 1/4-8UN(12UNF)-2A100 – Part No. 11-3161-2704-04, Qty 8
Nut, 1 1/4-8UN-2B (SPL) – Part No. 11-3161-2704-05, Qty 8
Charging Hose of Dampener:
Charging hose of dampener – Part No. 11-3161-2711-00, Qty 1
Nut, 3/4-16UNF-2B – Part No. 11-3161-2711-01, Qty 1
Inlet adapter – Part No. 11-3161-2711-02, Qty 1
Adapter fitting – Part No. 11-3161-2711-03, Qty 1
Seal washer – Part No. 11-3161-2711-04, Qty 1
Pipe collar – Part No. 11-3161-2711-05, Qty 1
Rubber pipe, 6I-2500 – Part No. 11-3161-2711-06, Qty 1
JA-3 Relief Valve:
Joint – Part No. 11-3161-2801, Qty 1
Retainer ring – Part No. 11-3161-2802, Qty 1
Piston assembly – Part No. 11-3161-2803-00, Qty 1
Valve – Part No. 11-3161-2804, Qty 1
Piston rod – Part No. 11-3161-2805, Qty 1
Cushion – Part No. 11-3161-2806, Qty 1
Elastic straight pin – Part No. 11-3161-2807, Qty 1
Locking spring – Part No. 11-3161-2808, Qty 1
Safety guard – Part No. 11-3161-2809, Qty 1
Plate, shear pin – Part No. 11-3161-2810, Qty 1
Shear pin – Part No. 11-3161-2811, Qty 1
Warning plate – Part No. 11-3161-2812, Qty 1
Pin – Part No. 11-3161-2813, Qty 1
Special Tools:
Special tools – Part No. 11-3161-2600, Qty 1
Stick, liner cover – Part No. 11-3161-2601-00, Qty 1
Hoisting tool for liner – Part No. 11-3161-2602-00, Qty 1
Socket spanner, 2 3/8 inch – Part No. 11-3161-2603, Qty 1
Socket spanner, 2 inch – Part No. 11-3161-2604, Qty 1
Socket spanner, 3 5/8 inch – Part No. 11-3161-2605, Qty 1
Socket spanner, 1 1/2 inch – Part No. 11-3161-2606, Qty 1
Socket spanner, 1 5/8 inch – Part No. 11-3161-2607, Qty 1
Extension rod, 19 5/8 inch – Part No. 11-3161-2608, Qty 1
Extension rod, 8 inch – Part No. 11-3161-2609, Qty 1
Connector, 1 inch – Part No. 11-3161-2610, Qty 1
Extension rod, 24 inch – Part No. 11-3161-2611, Qty 1
Chain block, SH1/2 – Part No. 11-3161-2611-01, Qty 1
Manual oil pump, 0~63 MPa – Part No. 11-3161-2611-02, Qty 1
Hydraulic puller – Part No. 11-3161-2612-00, Qty 1
Intermediate taper sleeve – Part No. 11-3161-2613, Qty 1
Pressing sleeve – Part No. 11-3161-2614, Qty 1
Socket spanner, long – Part No. 11-3161-2615-00, Qty 1
Bolt, 1-8UNC-2AX 160 – Part No. 11-3161-2616, Qty 1
Allen wrench, 5/8 inch – Part No. 11-3161-2611-03, Qty 1
Insert plate puller – Part No. 11-3161-2617-00, Qty 1
Socket spanner, 1 11/16 inch – Part No. 11-3161-2618, Qty 1
Seals and Other Components:
Spare parts with mud pump – Part No. GH3161-29.00
Oil seal, 9.125 inch x 10.375 inch x 0.625 inch – Part No. GH3161-03.11
Oil seal ring – Part No. GH3161-04.06
Double lip oil seal, 5 inch x 6.25 inch x 0.625 inch – Part No. GH3161-04.07
Seal washer – Part No. GH3161-09
Seal ring, R35 (steel) – Part No. GH3161-22.04(A)
Seal ring, R27 (steel) – Part No. GH3161-22.06.12
Seal ring, R44 (steel) – Part No. GH3161-23
Seal ring, R39 (steel) – Part No. GH3161-27.01
Air cell (bladder), discharge dampener – Part No. GH3161-27.03.00
Piston assembly, relief valve – Part No. GH3161-28.03.00
Bumper pad – Part No. GH3161-28.06
Charging hose assembly, dampener – Part No. GH3161-27.11.00
Crankshaft, hollow – Part No. GH3161-02.08.00
All HYRIG HONGHUA HHF-1600 spare parts are manufactured from premium materials with advanced heat treatment processes to withstand demanding drilling environments. Our products are trusted by drilling contractors worldwide for their exceptional durability, consistent quality, and superior cost-effectiveness.
We offer competitive pricing, rapid global logistics, and comprehensive technical after-sales support. Whether you need standard maintenance consumables or custom-engineered solutions for specialized applications, HYRIG is your reliable long-term partner for HONGHUA HHF-1600 mud pump spare parts.
For inquiries and orders, please contact:
info@hyrig.com
HYRIG – Your Trusted Source for HONGHUA HHF-1600 Mud Pump Spare Parts
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.