How to Read VICKERS Valve Model Codes | DGMC, CG5V, DGMX2

2026-10-25 11:07

How to Read VICKERS Valve Model Codes

HYRIG can supply VICKERS hydraulic valves and replacement parts. Understanding the VICKERS model code system is essential for selecting the correct pressure relief or reducing valve. This guide breaks down the codes for the DGMC, CG5V, and DGMX2 series.

Understanding the 02- Material Number

VICKERS assigns a unique 02-xxxxxx material number to each orderable valve configuration. Unlike REXROTH (which uses R-numbers), VICKERS relies on the model code plus the 02- number for purchasing. You must specify the complete model code to obtain the correct 02- number.

DGMC / DGMC2 SystemStak Valves

The DGMC code describes a sandwich relief valve. Example: DGMC-3-PT-CW-41.

  • DGMC: Series (DGMC2 for dual relief)
  • -3-: Size (NG6)
  • PT: Port function (P to T relief)
  • CW: Pressure range (10–200 bar)
  • -41: Design number

If a code contains asterisks (e.g., DGMC2-3-AB--BA), the asterisks represent the pressure range or seal code that must be specified at the time of order.

CG5V Solenoid Relief Valves

The CG5V code includes electrical and pressure parameters. Example: CG5V-8GW-D-M-U-B6-11.

  • CG5V: Series
  • -8: Size (NG8)
  • GW: Pressure range (3–350 bar)
  • -D: Solenoid voltage (220V AC)
  • -M: Manual adjustment
  • -U: DIN 43650 connector

DGMX2 Reducing Valves

The DGMX2 code defines the reducing port and spring range. Example: DGMX2-5-PB-AH-S-30.

  • DGMX2: Series
  • -5: Size (NG10)
  • PB: Reducing port (P reducing, B pilot)
  • AH: Pressure range (30–725 psi)
  • -S: Viton seal

Cross-Reference: VICKERS vs. REXROTH

If you are replacing a REXROTH valve, do not search for an R-number in the VICKERS catalog. R-numbers are specific to REXROTH. Instead, match the mounting standard (e.g., ISO 4401-03) and the functional requirements (pressure, flow, port) to the VICKERS model code, then find the corresponding 02- number.

Selection Support

If you have a VICKERS model code but are missing the 02- number, or if you need to cross-reference a competitor's part, contact HYRIG. Our engineers can decode the model code and provide a quotation for the exact configuration.

Disclaimer: VICKERS and REXROTH are registered trademarks of their respective owners. HYRIG is an independent supplier of hydraulic components and is not affiliated with these companies.

Contact

For help decoding VICKERS model codes, contact HYRIG: info@hyrig.com

Name:
Message:
Verification code:
Submit
Comment