Keywords: disc brake blocks, brake pads for drilling rigs, PSK brake block, DBS brake pad, BOKE friction disc, BPHT caliper lining, BOMCO brake block, RG brake pad, Honghua HH-PS friction material, cross-brand replacement
HYRIG supplies high-quality disc brake blocks (brake pads) for all major hydraulic disc brake systems used in oil & gas drilling and workover rigs. Our products cover the following brands and series:
Beijing PSK – PSK50, PSK70, PSK75, PSK80, PSK90, PSK120, PSK130
Gold Basin (DBS) – DBS30, DBS50, DBS65, DBS75, DBS90, DBS120 (electronic lever)
Renqiu BOKE – PSZ65, PSZ75A, PSZ75B, PSZ90; BK65, BK75; arctic PSZ75D
Beishike BPHT – BPHT/PS30, PS40, PS50, PS70, PS75, PS80, PS90, PS120
BOMCO (Baoji) – PS30, PS40, PS50, PS70, PS75, PS80, PS90, PS120
Nanyang RG – PZ30, PZ40, PZ50 (compact workover rigs)
Sichuan Honghua – HH-PS70, HH-PS90 (Middle East export)
For other brands or obsolete models, please provide old sample or dimensions – HYRIG can match perfectly.
1. Product advantages
OEM-grade dimensional accuracy – CNC machined, bolt holes and thickness match original parts. No on-site trimming required. Standard thickness and heavy-duty wear-resistant options available.
High-performance friction materials – Four grades to suit every environment:
| Grade | Application | Key features |
|---|---|---|
| High wear resistance | Standard land drilling | Long service life, low disc wear |
| High temperature | Deep / ultra-deep wells, Middle East | Stable μ ≥ 0.45, withstands 750°C without fading |
| Arctic / low temperature | Siberia, polar regions (-45°C) | Good impact toughness, no cracking |
| Dust / water resistant | Desert, offshore platforms | Sand ingress resistance, salt spray protection |
Reliable braking performance – Friction coefficient 0.40 – 0.50 (customizable). Non-asbestos, environmentally friendly.
Strict quality control – Each batch tested for hardness, density, friction and wear. Traceable batch codes with test reports available.
2. Why choose HYRIG for brake blocks?
Cross-brand compatibility – Even if your disc brake is not listed, just send your old block’s length, width, height and bolt hole spacing. HYRIG engineers will find or make a perfect match.
Stock and fast delivery – Common sizes in stock. 48-hour dispatch for standard orders. 24-hour expedited service for emergencies.
Technical support – Free fitment verification using drawings, photos or old parts. Avoid wrong purchases.
Bulk & frame agreements – Volume discounts for drilling contractors and workover fleets. Annual frame contracts with monthly stock replenishment.
3. Ordering guide
Identify your disc brake model – PSK? DBS? BOKE? etc. (see full list above)
Check quantity – Typically 4 to 12 blocks per brake (depends on number of working calipers).
Select friction grade – Standard, high-temperature, arctic, or dust/water resistant.
Contact HYRIG – Email your requirements to info@hyrig.com for a quote and delivery time.
4. Contact us
HYRIG – Your one‑stop source for drilling disc brake blocks (brake pads)
Email: info@hyrig.com
(Free sample available for fleet evaluation. Full technical data sheet and quotation upon request.)
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.