Hydraulic Elevator Series | HS375 & HS495 Power Slips
Overview:
HYRIG can supply the hydraulic elevator series and their spare parts. These automated wellhead tools are designed to clamp and release drill pipes, casings, and tubings using hydraulic power. They feature a high degree of automation, reducing labor intensity and improving safety during tripping operations.
The hydraulic elevator is installed in the rotary table. The dimensions of the elevator body must match the master bushing of the specified rotary table. Please verify the rotary table model and the required pipe size range before ordering.
The hydraulic elevator uses hydraulic pressure to open and close the slip body and the centering top cover. The combination of the slip body, jaw case, and jaws allows it to adapt to a wide range of pipe sizes. It features a hydraulic feedback device for safety monitoring and an integrated automatic/manual lubrication system to extend service life.
Selecting the correct hydraulic elevator requires matching it to your rotary table model and the pipe sizes you handle.
Tell us your rotary table model, and our engineers will assist.
Used in the wellhead area of drilling rigs for automated clamping and releasing of the drill string during tripping and casing running operations.
Disclaimer: This equipment is designed for hazardous environments. Ensure strict compliance with local safety standards and verify certification documents prior to operation.
We supply replacement parts including jaw cases, jaws, and hydraulic cylinders for the HS series. Please visit our Wellhead Tools page.
Specifications:
FAQ:
Contact Us:
For hydraulic elevator selection and spare parts, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.