HYRIG can supply the 050 series hydraulic steering units. The 050 is a small displacement Power Steering Unit (PSU) available in 50 and 63 ml/r options, designed for mini engineering vehicles such as small tractors and lawn mowers.
The 050 series features an optimized control valve design for smooth steering and low hydraulic noise. It utilizes a special casting design for low pressure drop, ensuring efficient operation in compact hydraulic systems.
Data source: Technical data table
| Parameter | 050-50 | 050-63 |
|---|---|---|
| Displacement (ml/r) | 50 | 63 |
| Length L (mm) | 139.5 | 141.5 |
| Max System Pressure (MPa) | 16 | 16 |
| Input Torque (N·m) | 1.7 - 2.5 | 1.7 - 2.5 |
The 050 series uses a compact flange design.
| Dimension Item | Standard Value (mm) |
|---|---|
| Mounting Flange | 4-M10x1.5 (Depth 16) |
| Flange Bolt Pattern | 84 x 84 mm |
| Shaft Type | Short neck, Long neck, or Internal involute spline |
| Spline Data | 12 Teeth, 30° Pressure Angle, Pitch Dia. Φ19.05 mm |
Explore individual models:
Replacing a small displacement steering unit on a compact machine? Here's what to check:
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
Not sure if the 050 series can handle your machine's load? Tell us your vehicle type and steering cylinder size, and our engineers will confirm.
Q: What is the maximum displacement of the 050 series?
The 050 series is available in 50 ml/r and 63 ml/r displacements.
Q: Can I use this in a load sensing system?
No, the 050 series is an open center steering unit.
For 050 series small displacement steering unit selection, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.