Hydril GK Annular BOP Selection & Maintenance Guide | HYRIG

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
Selecting the correct packing element for a Hydril GK Annular BOP depends on the well environment, operating temperature, and fluid composition. This guide outlines the criteria for choosing between Natural and Nitrile compounds, and distinguishes the GK from other Hydril annular models.
Conatct For Details
DetailReview(0)Additional

Hydril GK Annular BOP Selection & Maintenance Guide

Selecting the correct packing element for a Hydril GK Annular BOP depends on the well environment, operating temperature, and fluid composition. This guide outlines the criteria for choosing between Natural and Nitrile compounds, and distinguishes the GK from other Hydril annular models.

Key Facts

  • Brand: Hydril
  • Model Family: GK Annular
  • Part Type: Technical Selection & Maintenance Guide
  • Supplier: HYRIG

Fitment Check

ConditionAction
You are operating in standard temperatures (up to 180°F / 82°C) without H₂SSelect the Natural Rubber packing element for optimal elasticity and sealing on irregular shapes.
The well contains H₂S, CO₂, or requires higher abrasion resistanceSelect the Nitrile (NBR) packing element with NACE MR0175 compliance.
Your BOP nameplate says 'GL' or 'GX' instead of 'GK'Do not order GK elements. The internal profiles and insert geometries are different. Contact HYRIG for GL/GX matching.
The packing element is leaking after closing on pipeVerify the operating pressure is correct, inspect the element for tears, and check if the Piston (Item 3) or Slotted Sleeve (Item 4) is excessively worn.

Common field error: Installing a packing element without applying a generous coating of silicone or BOP grease to the bore and the element itself. Dry installation causes the elastomer to bind, leading to pinching, tearing, and premature failure on the first closure.

Verification & Compliance

  • Api Standard: API 16A 4th Edition
  • Testing Standards: Factory tested: 50% of rated working pressure on open hole, 100% on pipe.
  • Traceability: Material test reports (MTR) provided for all elastomers and metal inserts.

Contact

Email info@hyrig.com with:

  • BOP nameplate photo (confirming GK model and pressure rating)
  • Operating temperature and fluid conditions (H2S/CO2 levels)
  • Quantity required

Related Pages

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit