OEM Interchangeable, 5-10x Longer Life Than Bimetal Liners – Full IDECO T Series Coverage
Product Overview
As the core fluid-end component of IDECO mud pumps – a prestigious brand in global oilfield drilling equipment – our ceramic cylinder liner is exclusively engineered for the IDECO T1300/1600 dual-power triplex mud pump. This pump operates in two power modes: 1300HP (5000 PSI, high-displacement) and 1600HP (7500 PSI, high-pressure). The liner adopts a high-performance composite structure: a forged 45# carbon steel (AISI 1045) outer shell combined with a ZTA (Zirconia Toughened Alumina) ceramic inner sleeve. This design delivers unmatched wear resistance, corrosion protection, and pressure tolerance. Fully compliant with API 7K standards and precision-machined to IDECO original dimensions, each liner is 100% interchangeable with OEM parts. It is ideal for onshore and offshore high-efficiency drilling, deep well operations (1500-3000m), and high-sand abrasive mud environments.
Core Specifications
| Parameter | Detail |
|---|---|
| Material | Outer: Forged 45# Carbon Steel (AISI 1045); Inner: ZTA Ceramic (Zirconia Toughened Alumina) |
| Ceramic Hardness | 92 – 94 HRC |
| Steel Shell Hardness | HB 180 – 220 |
| Working Pressure | 5000 – 7500 PSI (34.5 – 51.7 MPa) – matched to dual-power mode |
| Service Life | 6000 – 10000+ operating hours (5-10x longer than bimetal/high-chrome liners) |
| Surface Finish | Mirror honing (4-8 RMS / Ra ≤ 0.4μm) |
| Certifications | API 7K, ISO 9001 |
| Bore Sizes | 140 – 200 mm (standard sizes; custom available) |
| Assembly | Hot-press interference fit + shoulder-locking design (anti-slippage) |
| MOQ | 3 pieces |
| Lead Time | 5 – 15 working days (large inventory for T1300/1600) |
Model-Specific Matching Guide (Dual-Power Adaptation)
The IDECO T1300/1600 is a dual-power mud pump. Our ceramic liner is engineered to perform flawlessly in both operating modes:
1300HP Mode (High-Displacement) – 969 kW / 1300HP, max 34.5 MPa (5000 PSI). Recommended bores: 140mm, 150mm, 160mm, 170mm, 180mm. Stroke: 305mm (12"). Ideal for onshore large-scale drilling and high-flow mud circulation. Service life: 6000-8000+ hours.
1600HP Mode (High-Pressure) – 1193 kW / 1600HP, max 51.7 MPa (7500 PSI). Recommended bores: 160mm, 170mm, 180mm, 190mm, 200mm. Stroke: 305mm (12"). Ideal for deep well drilling (1500-3000m), offshore auxiliary drilling, and high-pressure corrosive mud environments. Service life: 10000+ hours – 10x longer than bimetal liners.
Key Advantages
Dual-Power Adaptation for T1300/1600’s Versatility – The ZTA ceramic inner sleeve is engineered to withstand both 1300HP (5000 PSI) and 1600HP (7500 PSI) working conditions, adapting perfectly to IDECO T-series’ dual-power switching design. It offers superior toughness compared to pure alumina ceramic – resisting abrasive solids (up to 21% in drilling fluids) and corrosive media (chloride, sulfide), eliminating scratches and pitting common in metal liners during high-load operations.
API 7K Compliant & IDECO OEM Interchangeable – Precision machined to ±0.025mm dimensional tolerance. Direct drop-in replacement for IDECO original parts – no modification needed for dual-power switching. Each liner passes a 1.5x rated pressure hydrostatic test (3 minutes, no leakage). Fully compatible with T1300/1600’s fluid end structure, matching the pump’s industrial-grade reliability. ISO 9001 certified manufacturing ensures consistent quality.
Cost-Saving Longevity for Dual-Power Scenarios – In 1600HP high-pressure mode, service life reaches up to 10000+ hours – 10x longer than bimetal liners, critical for reducing downtime in deep well (2500m+) high-pressure projects. In 1300HP high-displacement mode, 6000-8000+ operating hours cut replacement frequency and maintenance costs by over 40% – aligning with large-scale onshore drilling efficiency requirements.
High-Strength Structure for Extreme Pressure Switching – The forged 45# steel shell (tensile strength ≥610 MPa) resists cyclic hoop stress during dual-power switching, avoiding fatigue damage under 51.7 MPa (7500 PSI) peak pressure. The permanent metallurgical bond between steel and ceramic prevents any relative movement or leakage – even in frequent power-adjustment working conditions.
Targeted Supply for IDECO Users – We stock IDECO T1300/1600 ceramic liners in full bore sizes for fast delivery. Custom dimensions are supported based on IDECO’s imperial or metric requirements. Trial orders (MOQ 3 pieces) are accepted – ideal for buyers maintaining IDECO T-series dual-power mud pumps.
Application Scenarios
Onshore large-scale oil & gas drilling – 1300HP high-displacement mode
Deep well drilling (1500-3000m) – 1600HP high-pressure mode
Offshore auxiliary drilling operations
High-abrasion and high-corrosion mud circulation systems
IDECO T1300/1600 mud pump maintenance and overhaul
Dual-power switching drilling projects (adapting to variable formation requirements)
Installation & Maintenance Tips
Handle with soft padding – avoid dropping or impacting the ceramic sleeve (critical for maintaining dual-power adaptation precision).
Ensure piston-liner alignment (clearance 0.05-0.1mm) to prevent eccentric wear – key for T1300/1600’s 305mm stroke design during power switching.
Drain mud completely when idle below 0°C to prevent freezing and ceramic cracking – applicable for cold-region drilling operations.
Use wooden blocks for adjustments – never strike the liner with metal tools, as this protects the ceramic inner sleeve and IDECO’s fluid end structure.
Packaging & Shipping
Inner Package: Anti-rust oil + plastic bag + bubble wrap
Outer Package: Wooden case customized for sea or air freight
Shipping Terms: FOB, CIF, EXW (DHL, FedEx, UPS for express; sea shipping for bulk orders)
Port of Loading: Shanghai, Qingdao, Tianjin, China
FAQ
Q: Are your liners compatible with IDECO T1300/1600’s dual-power design?
A: 100% compatible. Engineered to adapt to both 1300HP (5000 PSI) and 1600HP (7500 PSI) modes, precision machined to IDECO’s original dimensions (305mm stroke). Direct replacement, no modification needed for power switching.
Q: Do you have IDECO T1300/1600 ceramic liners in stock?
A: Yes. Full bore sizes of T1300/1600 are kept in large inventory – lead time 5-7 days, supporting fast delivery for urgent maintenance needs.
Q: Can I order a trial for IDECO T1300/1600?
A: Yes. MOQ is 3 pieces, and trial orders are welcome to test compatibility and performance.
Q: What certifications do you provide?
A: API 7K and ISO 9001. Full test reports and certification copies are available upon request, compliant with global oilfield drilling equipment standards.
Q: Do you support custom bore sizes for IDECO pumps?
A: Yes. Custom bore sizes and lengths are supported based on your drawings or samples.
Contact Us Now for a Quote or Compatibility Verification
Email: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.